A must have reference & data chart book for your workshop. The 28 pages contain data on standardised drill sizes & decimal equivalents, details of all popular threads, tapping & clearance drills, UNF, UNC, BSF, BSW, Metric coarse & fine, hardness comparison tables, jig boring co-ordinates for equally spaced holes, allowances for sheet metal bending & Morse tapers. It also contains tables for sine, cosine, tangents & cotangents. The Zeus Chart fits inside a shirt pocket & with its laminated pages will not pick up dirt, grease or oil. ...

Zinc Blackening Kit. Instructions: Make sure the Gloves & Mouth Mask & Eye Protectors provided are worn before starting the process. Gently pour the Zinc Black Solution into the kit tub & immerse your items into the liquid which will start to go black. Leave for Approx. 10 minutes, remove carefully when completely black & rinse thouroughly in water. Dry with the soft cloth provided. The black zinc surface should be treated with oil, varnish or lacquer to protect it, or to provide a more glossy finish. This product can be used many times before having to be replaced. ...

Zinc Brush-on Passivate (1 litre) for Brush-on Zinc Plating kit ...

TO USE YOUR PLATING KIT, YOU WILL ALSO NEED the Common Plating Module which
Includes:: a 10 litre tub, Power Supply,
...

TO USE YOUR PLATING KIT, YOU WILL ALSO NEED the Common Plating Module which
Includes:: a 10 litre tub, Power Supply,
...

KIT CONTENTS Plating tank, 1 zinc plating salts, 1 zinc 757 solution, set zinc anodes (2), tank support rod set, support clip set, crocodile lead set, power supply, control unit, scourer powder, mask, gloves, eye protection glasses, cleaning cloth & instructions ...

5 litre Zinc Post Plating Solution for Cadmium Zinc Plating. The cadmium-zinc plating found on washers, race car components etc is unsafe to do at home. However, our Cadmium-Zinc system gives the same finish & protection, using chemicals, which are not dangerous. ...

Zinc salts (5 litres, 1 kilo) for Zinc Plating Modules ...

Zinc Stripper Starter Kit removes zinc from iron, steel, brass & cooper. Leaves a clean active surface ready for re-plating or further treatment. Instructions: Place the item to be stripped into the provided plastic tub. Make sure the gloves, mouth mask & eye protectors are worn before starting the process. Gently pour & immerse the product into the liquid which will start to fizz upon contact. When the product stops fizzing which could be up to 30 minutes, remove carefully & rinse thouroughly in water. Dry with the soft cloth provided ready for plating as soon as possible to avoid any potential rusting. Some surfaces may require further treatment prior to replating. ...

Zinga is not paint. It is a pure zinc coating (with no pigments or extenders etc) & it will physically galvanise a car body or chassis & provide a great many years of protection against rust in any form. All conventional 2K automotive paints as well as basecoat or clear automotive paints can over coat Zinga. It can be primed with all standard 2K primers. Zinga Cold Galvani Zinc Coating  is a one-component anti-corrosion zinc coating system which contains a minimum of 96% zinc in the dry film. Its unique formula provides environmentally safe cathodic protection to steel comparable with hot-dip galvanising, with the added advantage that it can be applied as though it were a paint. KEY FEATURES Longer protection than hot-dip galvanizing applied to the same thickness On site application by brush, spray,  aerosol or dip methods Can be applied on top of existing galvanising, existing or damaged Zinc thermal spray or a previously applied layer of Zinga Can be overcoated with most topcoat systems More than double the service life when used as part of a 2 stage system. E.g Excellent primer before overcoating  with powder or 2K paint products Good resistance to mechanical abrasion Excellent adhesion over grit blasted steel Extremely flexible Can be applied in extreme temperatures Weldable to X-ray quality Certified as non-flammable Unlimited shelf-life & unlimited pot-life Also Available: 500ml aerosol spray, 1KG Coating, 5kg,   25kg CAUTION:   When using cellulose or solvent-borne acrylic automotive primers, the Zinga cold galvanising system must first be sprayed with a water-based barrier coat. Zinga solve is the recommended thinner to be used with  Zinga Cold Galvani Zinc Coating when spraying. It can also be used for cleaning when using Zinga. Coverage: In practice, the quantity of Zinga required to coat a given area is dictated by both the required dry film thickness (DFT) & the depth of the blast-profile. As a guide to coat 1m 2 of steel with a Blast profile of 60micons Rz, at a DFT of 60microns (with no wastage) will require 0.41kg of Zinga. Or coverage equates to 2.41sqm per 1kg of Zinga. Read: " How ZINGA Works " from Technical Articles for more infomation Zinga Trouble-Shooting Chart ...