VHT Roll Bar & Chassis Paint is a one step epoxy coating that does not require primer. It gives the appearance of a tough baked-on finish that is chemical, corrosion, rust & salt resistant. Temperature:  250°F (121°C) Intermittent Dry Time:  Dries to the touch in 30 mins. Dries thoroughly overnight. No curing required. Applications: Frame & Chassis, Shop Racks, Tools & Equipment, Trailers Finish:  Gloss ...

VHT Roll Bar & Chassis Paint is a one step epoxy coating that does not require primer. It gives the appearance of a tough baked-on finish that is chemical, corrosion, rust & salt resistant. Temperature:  250°F (121°C) Intermittent Dry Time:  Dries to the touch in 30 mins. Dries thoroughly overnight. No curing required. Applications: Frame & Chassis, Shop Racks, Tools & Equipment, Trailers Finish:  Satin ...

VHT Rust Convertor destroys rust on contact. It sprays on clear & turns to a black metal-protecting coating to prevent future rust from forming. Specifically formulated for application over metal, body filler or fiberglass, Rust Convertor sands to a smooth, even finish. Dry Time: Allow 24 hours before applying top coat. Applications:  Rusted Metal Surfaces Net Weight:   11 oz. Finish:   Flat ...

VHT Satin Black Barrel Paint has been custom-formulated to restore motorcycle engines to their factory original appearance. It is extremely resistant to oil, fuel & solvents & is heat resistant to 550°F (287°C). It virtually stops rust & corrosion whilst resisting chipping, cracking & fading. The use of an etching medium or self etching primer is advisable prior to coating stainless steel. This will help ensure adhesion. After using the self etching primer you can apply the paint, or add another layer of primer which can be sanded smooth prior to the topcoat. The Aluminum doesn't require a self etching primer, however it is not a bad idea just to help the bond. ...

VHT Brake Calliper paint is a High Temperature Brake Drum, Caliper & Rotor Paint has been specifically designed for the custom detailing of brake components. This innovative new finish is a 482°C (900°F) chemical resistant coating with excellent durability & weather resistance Ideal for custom detailing your vehicle. This will not chip, crack, fade or rust even under extremes of operation or road & weather conditions. It's easy to apply, dries quickly, & chemical resistant. Careful preparation is essential Aerosol: 11 oz (312g) Temperature: 900°F (482°C) Applications: Brake Calipers, Rotors, Brake Drums Finish: Satin & Gloss Dry Time: Dries to touch in 30 mins. Dries thoroughly overnight. Curing Caliper Paint VHT Caliper Paint only attains its unique properties after correct curing.
- Bake at 200°F (93°C) for 1 hour.
- The inherent heat of braking operation will also accomplish curing. Other Colours available: Bright Blue, Satin Black, Red, Yellow, Gloss Black, Gloss Clear, Real Orange.

...

VHT Epoxy Paint is a one-step epoxy coating, which does not require the use of a primer. It has been formulated to give the appearance & durability of a baked-on finish. It provides a porcelain-like finish that is chemical, corrosion, rust & salt resistant. Finish:  Satin Black Temperature:  250°F (121°C) Intermittent Applications:  Suspension, Kick Panels, Tools Dry Time:  Dries to the touch in 30 mins. Dries thoroughly overnight. No curing required. Net Weight:  11 oz. VHT provides a high-performance coating system for the ultimate in protection & quality. This system

Includes:: surface preparation & Epoxy Paint.

...

VHT Black Oxide Case Paint is a satin finish high temperature coating developed specifically for 2- & 4-stroke motorcycle engines. It is petrol & solvent resistant, & virtually stops rust & corrosion, even in severe weather conditions. Temperature: 550°F (288°C) Intermittent Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Cures when engine is ran. Applications: Small Motorsport Engines Net Weight: 11 oz. ...

VHT Flame Proof Coating will renew & extend the life of any surface exposed to extremely high temperatures. This unique coating is a semi matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems & the aerospace industry for jet engines, re-entry vehicles & other high temperature applications. VHT Flame Proof Coating will withstand temperatures up to 1093°C (2000°F) & is ideal to be used on headers, exhaust systems, or wherever an extreme temperature coating is needed. Temperature: 704°C-1093°C (1300°F-2000°F) Applications: Headers, Exhaust Manifolds, Piston Domes, Inside Heads Finish: Flat Dry Time: Curing time required & can be done on or off vehicle (see below) Curing Flame Proof VHT Flame Proof High Temperature Paint only attains its unique properties after correct curing (refer to instructions on the can). On the Vehicle Off the Vehicle
- Paint must be completely dry before curing
- Run at idle for 10 minutes
- Cool for 20 minutes
- Run at idle for 20 minutes
- Cool for 20 minutes
- Paint must be completely dry before curing
- Heat to 250°F (121°C) for 30 minutes
- Cool for 30 minutes
- Heat to 400°F (204°C) for 30 minutes
- Cool for 30 minutes
- Heat to 650°F (343°C ) for 30 minutes Caution: Do not exceed the temperature of the least heat tolerant component or the base metal Aerosol: 11 oz (312g) Paint Colours Available: Satin Clear, Cast Iron, Flat Black, Flat Silver, Flat White, Flat Red Primer

Colour: Flat White












...

VHT Engine Enamel has excellent durability & superior heat & chemical resistance. This is specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today’s gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamel is a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough durable heat or chemical resistant finish is needed. VHT Engine Enamel High Temperature Paint Colours: Gloss Clear, Ford Grey, Gloss Black, Satin Black, Chevy Orange Primer

Colour: Light Grey Temperature: 550°F (288°C) Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Curing Engine Enamel VHT Engine Enamel only attains its unique properties after correct curing.
- Bake at 200°F (93°C) for 20 minutes.
- The inherent heat of engine operation will also accomplish curing.



...

VHT Universal Gold Engine Enamel has excellent durability & superior heat & chemical resistance. It is specially formulated to withstand corrosion, rust, salt spray, chemicals & additives of today's gasoline blends & degreasers. VHT 550°F (288°C) Engine Enamels™ are a unique blend of urethane & ceramic resins, which produce a tough & long-lasting finish for engines, engine accessories or wherever a tough, durable heat or chemical-resistant finish is needed. Temperature: 550°F (288°C) Intermittent Dry Time: Dries to the touch in 30 mins. Dries thoroughly overnight. Applications: Headers, Engine Blocks, Starters, Brackets, Water Pumps, Valve Covers, Transmissions, Differential Covers Net Weight: 11 oz. Finish: Flat, Satin, Gloss & Metallic   C uring Engine Enamel™: Engine Enamel™ only attains its unique properties after correct curing. Bake at 200°F (93°C) for 20 minutes. The inherent heat of engine operation will also accomplish curing. ...