United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Mens Snowboard Boots
Available
-
The simple styling and
skate style outsole may
be understated but the
Brisse boot is definitely
designed for standout
shredding. The Dupont
Surlyn Highback
drastically increases the
durability of the boot as
well as the 6/10 flex
rating. Custom Flex and
C3- Lacing allow you dial
in the flex and the high
quality Thermo Flex
Liners ensure the best
possible fit.
Specification: Thermo
Flex Liners featuring
Shell Fixation, Heel
Harness and E-Lacing
Dupont Surlyn Highbacks
Waterproof Shell
Construction Double Power
Strap C-3 Lacing Custom
Flex D-Lug Outsole Flex:
6/10 Features: Thermo
Flex Liners are heat
moulded to your feet.
Unlike many other
‘fully mouldable’
boot liners that claim to
mould using the heat of
your feet alone, the
Deeluxe thermo liners are
heated using a specialist
boot fitter’s oven,
and achieve a genuinely
custom fit. We recommend
that all thermo liners
are fitted either in
store as part of our free
boot fitting service, or
at the very least heat
moulded by a professional
boot fitter for the
optimum fit. Thermo Flex
Liners feature a Heel
Harness that wraps around
your ankle, much like an
ankle brace to provide
firm, yet comfortable
support within your
liner. A Velcro shell
fixation prevents the
liner from moving within
the shell, allowing for
a consistent and strong
fit every time you put
your boots on. These
liners have E-lacing,
which is a super strong,
low friction lacing
system designed to be
comfortable and secure.
Dupont Surlyn Highbacks
form the core material
when constructing the
boot. Adding this
flexible, yet durable
plastic to the back of
the boot drastically
improves responsiveness
and durability.
Waterproof Construction
by means of clever
stitching and sandwich
construction, water
hasn’t got a chance. A
Double Power Strap around
the top of the boot
ensures a secure fit
right to the top of
tongue. C-3 Lacing allows
you to control the flex
you get by fastening the
different zones to
different degrees. With
one lace pull dedicated
to securing the heel and
ankle and the other for
the forefoot and shaft.
Custom Flex enables just
that. Adjust the support
and responsiveness to
your requires while using
the ankle lacing to
secure your foot. We are
big fans of Deeluxe boots
at Bliss Snowboards, for
the simple reason that
they ooze quality.
Deeluxe are an
independent company that
focuses all of their
efforts on crafting the
most durable and
comfortable boots on the
market. The Brisse is a
mid-price boot but the
quality of features,
construction and liner
would be top of the range
(and at a higher price)
if someone else made
them. We chose to stock
the Brisse with Thermo
flex liners that are a
little more expensive
than the alternative (PF
or CF liners). These are
a super high quality,
fully moldable liner.
It’s often said that
boots are the most
important bit of kit and
it could be argued that
liners are the most
important part of the
boot. Is it for me?
Chances are it is! Unless
you are looking for a
super-soft jib boot or a
super-stiff free-ride
boot then the Brisse will
have you more than
covered. You’d be hard
pushed to find boots that
are built as well.
Availability: In Stock
£123.95
Available
-
Featuring Double Crossbow
sole, the Decade SL
assures a stunning grip
on ice and slippery
surfaces. At the same
time Super lace closure
ensures fast and easy
locking, perfect for the
vicious rider that
doesn’t want to wait.
Last but not least The
TF3 liner delivers all
the fit, flow and
support that riders
demand to shred and jib
like there’s no
tomorrow. Specification
Tf3 Liner 540 Heel
Retention System Super
Lace SL Flex Window
Double Crossbow Outsole
Features The Tf3 Liner is
made from Thermo-Fit
Foam. This new advanced
lining material with
target fit zones moulds
to the contours of your
foot with a heater or
over time from natural
body heat. It is
anatomically designed and
reinforced with injected
memory foam for better
retention and comfort for
the feet. Brand new
webbing naturally adapts
to the instep, thus
permitting the closest
fit, and distributing
power of transmission all
over the liner surface.
Includes a Velcro power
strap for an even better
fit. With the 540 Heel
Retention System the
bootlaces pass through
pre-curved lace loops in
the ankle area of the
boot. This means that
when the laces are pulled
to close the boot, they
are at the same time
pulling the webbings
where the lace loops are
linked. In this way the
webbings shrink around
the ankle, increasing
heel stability. The more
the lace is pulled the
more power will be
transferred in the ankle
area, increasing the
heel retention
performance and foot
stability. Super Lace SL
is a Speed Lacing System
that allows the closure
of two different boot
areas, the quarter part
and the collar part
(upper and lower), in
order to allow you to
select the perfect
feeling on each part and
improve comfort and foot
stability. Your boot will
be closed quickly and
will stay tight and
perform all day. The Flex
Window enhances the
comfort and mobility of
the foot, and it
perfectly combines the
balance between the power
of transmission and a
progressive flex. The
sides of the collar area
slide on the upper
transferring the power in
a constant way avoiding
any possible overlapping
between materials, which
could lead to a waste of
energy and distortion of
the boot shape. Double
Crossbow Sole takes the
lightness and softness of
a special EVA compound,
mixes it with the
ultimate Double Crossbow
system, then refines all
with 4 different grip
areas and provides
probably the best
performing sole in the
market! The new crossbow
system provides a perfect
balance of power
transmission and
cushioning. The
particular design of the
outsole is developed to
allow maximum flexibility
and the perfect feel of
the foot. The Decade SL
combines great fit with
some great performance
enhancing features. The
Tf3 Liner was designed
after athlete analysis
and consideration of the
effect the binding strap
has on the boot and the
wearer. The result is a
liner that has
strategically placed foam
and works in unison with
the shell, therefore
providing a new level of
comfort. I also like the
grip on the sole, which
provides way more
traction than the
majority of the boots on
the market. Is it for me?
This medium flex boot is
suitable for the majority
of riders. The Flex
Window construction
allows for flex whilst
not compromising the fit.
All mountain and
freestyle snowboarders
will be suitably
impressed.
Availability: In Stock
£121.95
Available
-
As the evolution of boot
design continues so does
the standard of features
throughout the entire
range. The Anthem is
great example of that.
With the improved BOA
Colier that automatically
takes up slack in the
cables and the Closer
Lace Guide that focuses
lace tension to the
optimum parts of the
boot, and an Intuition
liner to cap it all off,
the Anthem offers far
more than you’d expect
from boot in its price
range. Specification:
Liner Intuition Plush
Foam Liners Aegis
Antimicrobial Coating
Thermo-Formable Internal
J-Bars Lock Down Turbo
Lacing Shell Boa Coiler
lacing with The Closer
Lace Guide Grip Sole Flex
(1-soft, 10-stiff): 5
Features Medium density
Intuition Plus Foam
Liners deliver the
ultimate plush feel for
all day comfort with
Thermo-Formable Internal
J-Bars for superior ankle
and heel hold with added
support. Lock Down Turbo
lacing has a clip to
secure the lace locking
system to the liner. This
keeps your laces in place
all day long. Boa Coiler
is an improved Boa reel
that retracts slack in
the cables making it even
an even faster speed
place system. The Closer
Lace Guide is centred
over the forefoot to
drive lace power down low
and even the lace tension
throughout the entire
boot. The Anthem has
great features that are
made all the more
impressive with a price
tag well below the £200
mark. With cleaver design
(The Closer Lace Guide)
Ride have improved the
comfort and fit without
having to up the price.
They are one of the items
where photos don’t do
them justice. Is it for
me? With a mid flex these
suit a huge range of
intermediate snowboarders
as well as making a
fantastic first boot for
those wanting to progress
their riding.
Availability: In Stock
£93.95
Available
-
BOA Colier lacing is the
improved BOA system that
automatically takes-up
slack in the cables
making it quicker than
ever to secure your
boots. On the Anthem this
is combined with Closer
Lace guide that
strategically directs
tension throughout the
boot and provides total
boot closure for all-time
control and a secure fit.
The Support Foam Liner by
Intuition provides
lasting comfort and
superior fit.
Specification: Liner
Intuition Support Foam
Liners Aegis
Antimicrobial Coating
Thermo-Formable Internal
& External J-Bars Lock
Down Turbo Lacing 3D
Formed Dual Density EVA
Insole Shell Boa Coiler
lacing with The Closer
Lace Guide Blown Light
Summit Sole Flex (1-soft,
10-stiff): 6 Features
Enhanced high density
Intuition Support Foam
Liners offers supportive
performance with
maintained comfort.
Thermo-Formable Internal
and external J-Bars
provide superior ankle
and heel hold with added
support. Lock Down Turbo
lacing has a clip to
secure the lace locking
system to the liner. This
keeps your laces in place
all day long. Boa Coiler
is an improved Boa reel
that retracts slack in
the cables making it even
an even faster speed
place system. The Closer
Lace Guide is centred
over the forefoot to
drive lace power down low
and even the lace tension
throughout the entire
boot. The Jackson is a
luxury boot with a
high-end finish and a
considered lacing set up.
I think Ride must have
made a mistake when
pricing them because they
are serious competition
for the other boots in
the same price range.
Is it for me? With a
mid-stiff flex these suit
a huge range of
intermediate to advanced
snowboarders Wear them
charging the piste,
slashing the pow or
throwing down in the
park.
Availability: In Stock
£101.95
Available
-
Ideal for Expert
Freestyle and
All-Mountain Carving. the
award winning Aviator is
the samurai sword of the
Jones quiver. This razor
sharp directional
freestyle board is a team
rider favorite and was
built for premier
stability on the ground
or in the air. The nimble
handling and supersonic
acceleration of the
Aviator result from the
3D Power Camber profile.
3D Power Camber is an
innovative positive
camber profile that
offers the insane edge
response of camber
without the usual
hang-ups. The board
profile crosses over into
the third dimension as
the base is beveled up at
the edges from the
contact points of the
camber to the ends of the
board. The 3D base
beveling releases the
edges where they like to
hook which balances the
pop and directional
stability of camber with
a looser, less-catchy
feel. NEW for 2015, the
Aviato features Triax
Carbon fiberglass for
added snap and pop.
Features 3D Power Camber
An innovative traditional
camber profile tweaked to
offer the insane edge
response of camber
without the usual
hang-ups. The board
profile crosses over into
the third dimension as
the base is beveled up at
the edges from the
contact points of the
camber to the ends of the
board. The base beveling
releases the edges where
they like to hook which
balances the pop and
directional stability of
camber with a looser,
less-catchy feel. Mellow
Magne-Traction Like a
serrated knife slicing
into the snow,
Magne-Traction improves
your edge grip by adding
multiple contact points
along the running length
of your board.
“Magne-Traction is a
critical feature for
rockered boards. Rocker
improves glide in mixed
conditions, but the
decreased edge contact
makes it harder to really
lock into your turns and
hold a solid edge.
Magne-Traction is crucial
to offset the edge drift
of rocker.“ - Jeremy
Jones Blunt Nose Shaping
“How a board glides in
powder, crust, corn or
any snow more than an
inch deep, is dictated
by it’s front contact
point and just past it.
Next time you are in soft
snow watch how much snow
comes over the corner of
the nose near the contact
point. The billowing snow
coming out from behind
the tip means you are
plowing through it which
is obviously slowing you
down. By adding a blunt
nose you get the float
benefits of a much longer
board without the ‘snow
plow’ rounded tip and
it’s extra swing
weight.“ - Jeremy Jones
Progressive Sidecut At
the far ends of the side
cut, the radius is
incrementally increased
as the edge reaches the
contact point. Gradually
increasing the side cut
radius towards the
contact point delivers
smoother turn initiation
and exit as the edge
tracks in and out of the
snow with a less abrupt
transition. Colours Red:
160cm Blue: 162cm
Availability: In Stock
£336.95
Available
-
As the evolution of boot
design continues so does
the standard of features
throughout the entire
range. The Anthem is
great example of that.
With the improved BOA
Colier that automatically
takes up slack in the
cables and the Closer
Lace Guide that focuses
lace tension to the
optimum parts of the
boot, and an Intuition
liner to cap it all off,
the Anthem offers far
more than you’d expect
from boot in its price
range. Specification:
Liner Intuition Plush
Foam Liners Aegis
Antimicrobial Coating
Thermo-Formable Internal
J-Bars Lock Down Turbo
Lacing Shell Boa Coiler
lacing with The Closer
Lace Guide Grip Sole Flex
(1-soft, 10-stiff): 5
Features Medium density
Intuition Plus Foam
Liners deliver the
ultimate plush feel for
all day comfort with
Thermo-Formable Internal
J-Bars for superior ankle
and heel hold with added
support. Lock Down Turbo
lacing has a clip to
secure the lace locking
system to the liner. This
keeps your laces in place
all day long. Boa Coiler
is an improved Boa reel
that retracts slack in
the cables making it even
an even faster speed
place system. The Closer
Lace Guide is centred
over the forefoot to
drive lace power down low
and even the lace tension
throughout the entire
boot. The Anthem has
great features that are
made all the more
impressive with a price
tag well below the £200
mark. With cleaver design
(The Closer Lace Guide)
Ride have improved the
comfort and fit without
having to up the price.
They are one of the items
where photos don’t do
them justice. Is it for
me? With a mid flex these
suit a huge range of
intermediate snowboarders
as well as making a
fantastic first for those
wanting to progress their
riding.
Availability: In Stock
£125.00
Available
-
This boot should become
the benchmark for what we
consider a light boot to
be. ThirtyTwo have taken
light to a new level
without compromising on
features such as the
articulating cuff, 3D
moulded toungue and 100%
heat Mouldable Intuition
liners. Specification:
Comfort Fit – Medium to
soft flex Level 1 Liner
100% Heat Moldable
Intuition Liners Single
Density Intuition Soft
Touch foam for comfort,
warmth & support Lacing
system with Lace Lock for
improved heel hold & fit
Internal anatomical EVA
overlays in heel for
optimal heel hold Aegis
anti-microbial coating to
eliminate odor Level 1
Footbed Die cut flat
sheet EVA Lightweight
providing optimum
performance Serpa
topsheet for warmth and
comfort Flex (1-soft,
10-stiff): 3 Features 3-D
Molded Tongue – Varies
in stiffness depending on
the boot giving a
customised flex and wraps
your foot for easier
lacing and better heel
hold. In order to
drastically reduce the
weight of their boots,
Thirty Two use an
alternative to having a
traditional (heavy)
rubber outsole. 32 boots
with STI Evolution Foam
are 15-40% lighter than
previous seasons, remain
the lightest in the
industry and provide
better cushioning than
traditional foam
material. 100% Heat
Moldable Intuition Liners
– Come down to our show
room to buy your 32’s
and get them heat moulded
for a custom fit.
Articulating Cuff boots
have two distinct areas
to the boot; the clog
(lower section) and the
cuff (top section) When
you flex the boot, the
join between these two
areas can often pinch and
distort. 32 boots with an
articulating cuff
eliminate this issue by
allowing the top half of
the boot to flex freely
without distorting the
lower section. Lots of
companies only produce
the outer shell of the
boot in whole sizes and
use different sized
liners to create half
sizes. This boot has 1:1
Liner to Outsole Fit so
the Shell and liner are
true whole and half
sizes. The JP Walker
Light is essentially a
stripped down version of
the Lashed. The changes
to the liner and foot bed
save weight making them
incredibly light. With
the soft flex they would
suit freestyle riders or
snowboarders with a
lighter build. Is it for
me? Ideal if you are
looking for a soft boot
for riding the park and
out of the box comfort or
are a beginner that isnt
used to having your feet
in snowboard boots, you
will appreciate the
forgiving feel of these
boots.
Availability: In Stock
£97.95
Available
-
The Moto is a long
standing boot in the
Burton line is the
biggest selling snowboard
boot in the world. With
Speed Zone Lacing that
independently fastens the
top and lower sections of
the boot and the
lightweight DynoLITE
outsole that offers
excellent shock
absorption you cannot get
a better boot for the
price. That’s why the
Moto has been the
world’s best-selling
snowboard boot for the
last 13 years.
Specification: Shrinkage
Footprint Reduction
Technology 1:1 Lasting
Speed Zone Lacing System
Imprint 1 Liner with
Integrated Lacing
DynoLite Outsole with
Sleeping Bag Soft Flex
Tongue Snow-Proof
Internal Gusset Level 1
Moulded EVA Footbed
Response: Playful-Medium
Features: Shrinkage
Footprint Reduction
Technology minimises the
overall size of the boot,
meaning that a men’s
size 10 fits like a size
10, but has the
footprint of a typical
size 9. The benefits are
a lighter, sleeker, and
shorter boot – no more
toe drag. All Burton
boots offer 1:1 Lasting,
which means every half
and full size liner gets
a matching half or full
size shell and outsole
for a precise fit. This
isn’t as common as you
would think in the world
of snowboard boots.
Lacing Speed Zone Lacing
System is lightning fast
and allows you to
customise the fit of the
upper and lower zones in
seconds. Liner Imprint 1
Liner with Integrated
Lacing and inner lace
lock is heat mouldable
for a customised fit.
Cushioning/Traction
DynoLite Outsole provides
superior cushioning and
improved board feel in a
20% lighter construction.
The exclusive cushioning
compound is specially
formulated to withstand
repeated impacts and
freezing temperatures for
long lasting shock
absorption. NEW Sleeping
Bag is a reflective foil
that transfers heat back
into the foot. Level 1
Moulded EVA Footbed
offers lightweight and
long-lasting shock
absorption. Shell Soft
Flex Tongue helps to
provide the playful to
medium response. Total
Comfort Construction
provides a broken-in feel
right out the box
eliminating the break-in
period for a consistent
fit and feel from day
1-100. Snow-Proof
Internal Gusset is a
feature found on all
Burton boots. Attached to
the tongue, the gusset
completely seals the
lower zone of the boot,
keeping feet warm and
dry. If you’re
reading this then you are
quite probably looking
for your first pair of
snowboard boots. If
that’s the case then
you have found the
quintessential first
snowboard boots. They are
low cost, progression
friendly and good
quality. It’s the
reason that the majority
of snowboarders own,
have owned, or at the
very least know someone
who has had a pair of
Moto’s. You can’t
argue with that kind of
popularity. Is it for
me? Perfect first boots
for beginners through
intermediate and great
for those on a budget.
Availability: In Stock
£99.95
Available
-
The Launch Lace packs a
lot of extra tech into a
classic lace up freestyle
boot. There is a three
part lacing procedure for
getting the boot
fastened, the internal
liner lace with a quick
pull and flip lock,
STR8JKT with a quick pull
and lock and the external
laces. The addition of
STR8JKT to the boots
fastening system provides
unparalleled support and
comfort while traditional
laces are low cost (the
BOA version of this boot
£20 more) and are easily
replaced if necessary.
Specification: Fat Lace
STR8JKT Silver Flex Liner
Custom Fit Foam Mystic 1
Footbed Flightweight
Outsole Heel Grip
Washable Flex: Medium
(4/10) Features: Lacing:
Traditional Laces are
simple – just like your
shoes and are easily
replaced if necessary.
Lock your feet down with
the supreme comfort of
STR8JKT, featuring an
additional inner heel
harness to combat dreaded
heel lift and provide
optimal comfort. This is
controlled with an
external quick pull and
lock lace. Liner: The
Silver Flex Liner
displaces lace pressure
for the top of your foot,
around the holding areas
of the arch and above the
heel. Extra Mid Flex
padding over the ankle
provides comfort and
response. For increased
comfort and foothold
Custom Fit heat mouldable
foam is strategically
placed in the sensitive
areas of the foot, shin,
ankle and heel. Specific
cat-tongue like Heel Grip
material around your feel
keeps your socks from
slipping down and causing
pressure points. The
design process uses
materials that do not
need to be glued together
meaning these liners do
not deteriorate trough
washing. Cushioning:
The Mystic 1 Footbed
increases blood
circulation and prevents
fatigue. One of the
lightest outsoles in the
Salomon range, the new
EVA/Rubber compound of
the Flightweight Outsole
is specifically
engineered for an
extremely lightweight,
cushioning and
low-profile freestyle
feel. The launch BOA
is a low cost boot with
quite a high-end fit and
the addition of STR8JKT
really makes it stand out
from the competition.
This extra fastening
device, which is locked
down with one lace pull
on the outside of the
boot, is quick and
effective. It really
helps to hold your foot
down without the
need/danger of over
tightening. Is it for me?
At the softer side of
mid-flex the Launch Lace
boot is best suited to
freestyle riders,
beginners and those
looking for comfortable
resort boot.
Availability: In Stock
£124.95
Available
-
The Thraxis couldn’t
get any more features
packed into it. Endo
construction ensures that
this premium quality boot
will stay true to form
for significantly longer
than a traditional
construction boot. Boa
Focus and Boa Conda
systems ensure that you
can get the perfect
setup, Vibram outsoles
are unquestionably the
highest quality outsoles
available on Snowboard
boots, and the intuition
liners provide unmatched
fit and support. All in
all this boot ticks all
the boxes, and several
more that you didn’t
even know that you
couldn’t live without
until now. Specification:
Endo Construction Triple
Boa; Boa Focus and Boa
Conda Intuition Pro Foam
3D liners with integrated
mouldable internal and
external J bars and full
boy reinforcement for
heel hold and control,
an integrated Power strap
for extra support and
stay-tight closure.
Vibram ProLite Sole with
Harshmellow 3D Formed,
Dual Density Eva foot
beds with Harshmellow
Flex: 9 Features: Endo
Construction is a K2
process whereby a
Urethane sheet forms part
of the boot shell. The
sheet wraps around the
rear of the boot,
offering consistent and
durable flex, while
reducing vibrations.
Urethane is far more
durable than traditional
material and stitching,
and will remain
consistent and
predictable long after
inferior boots have lost
their mojo. Turns a 30
day boot into a 90 day
boot. K2 was the first
snowboard company to
introduce Boa lacing
systems. Twist the (all
new) Boa dial on the
front of your boot
tongue, and the boot
will evenly tighten.
Push the button in, and
the ratchet releases,
and your boots loosen.
The new Coiler version
will even automatically
retract the slack in your
loose laces. Easy to use
with gloves on, no more
tangled laces, and if
you have any concerns
over the strength of the
cable, don’t. They
are strooooong. Boa Focus
is K2’s multi zone Boa
lacing system. One Boa
dial is dedicated to the
lower lacing zone of the
boot, while a Coiler Boa
dial controls the upper
lacing zone. The coiler
Boa automatically
retracts loose laces
keeping your boots in
shape and out of trouble
when not on your feet.
The Boa Focus, combined
with the Boa Conda will
offer you 3 dials of
adjustment to fine tune
your boot. Boa Conda
Lacing systems are a
godsend. They allow you
to adjust the tightness
and hold of your inner
laces, without having to
loosen your outer
laces. Twist the dial
on the side of the boot
and the internal lacing
will pull your heel back
in to your boot for added
control. Aching feet? Try
releasing some of that
tension to give your
swollen feet a bit of
respite. Intuition Liners
are highly regarded
custom mouldable liners,
using Ultralon Foam.
Fully mouldable either in
store as part of our free
boot fitting process, or
on the hill through the
heat from your body.
Intuition pro foam 3D
liners use High density
Intuition Ultralon foam
for perfect fit and
support. They also
feature internal and
external ‘J’ bars for
maximum ankle and heel
hold. An integrated power
strap helps keep
everything nice and
secure. Insoles are
constructed of 3D moulded
Dual EVA with Harshmellow
inserts for added
comfort. J bars are
inserts for your boot
liner. They can be
found either inside, or
outside of the liner
itself, and are designed
to increase the support
and hold on your feet.
Usually found in the heel
pocket to prevent your
heel from lifting inside
an otherwise well fitting
boot. AEPE Cages are
‘F’ shaped support
inserts found on the rear
of the liner cuffs. These
offer added support and
stiffness to the boot on
heelside motions, while
Availability: In Stock
£225.00
Available
-
The Legend is a masterful
blend of lightweight
design, durability, fit
and flex. It’s as tough
as nails, fits like a
glove and offers a soft
and superb flex...
definitely a masterpiece
to have!!! It comes with
the outstanding
Hypershock sole that
delivers amazing holding
traction power, killing
grip and sensational
impact resistance when
hitting the biggest
booters. The TF2 liner
permits the closest fit
and increases power
transmission all over the
boot. This legendary boot
lives on as a staple for
riders who shred the
entire mountain.
Specification Tf2 Liner
540 Heel Retention System
Super Lace SL Thermal
Welding Construction
Hypershock Outsole The
Tf2 Liner is made from
Thermo-Fit Foam. This new
advanced lining material
with target fit zones
moulds to the contours of
your foot with a heater
or over time from natural
body heat. It is
anatomically designed and
reinforced with injected
memory foam for better
retention and comfort for
the feet. Brand new
webbing naturally adapts
to the instep, thus
permitting the closest
fit, and distributing
power of transmission all
over the liner surface.
With the 540 Heel
Retention System the
bootlaces pass through
pre-curved lace loops in
the ankle area of the
boot. This means that
when the laces are pulled
to close the boot, they
are at the same time
pulling the webbings
where the lace loops are
linked. In this way the
webbings shrink around
the ankle, increasing
heel stability. The more
the lace is pulled the
more power will be
transferred in the ankle
area, increasing the
heel retention
performance and foot
stability. Super Lace SL
is a Speed Lacing System
that allows the closure
of two different boot
areas, the quarter part
and the collar part
(upper and lower), in
order to allow you to
select the perfect
feeling on each part and
improve comfort and foot
stability. Your boot will
be closed quickly and
will stay tight and
perform all day. Thermal
Welding technology brings
Northwave distinct
advantages in integrating
different materials and
creating an ‘element
beating’ seamless
outsole. This is
particularly important in
the ankle zone where
there is no interruption
of the upper boot
technology bringing
progressive support from
the heel to the calf. The
visible asymmetrical y
differentiates the three
zones: it provides a
stronger support on the
outside for increased
control when pressing,
buttering and spinning;
more flexibility
laterally on the inner
boot. The Hypershock
Outsole guarantees
comfort and high
performance with maximum
weight reduction.
Innovative technology
designed by HYPERSHOCK
allows you to find strong
holding traction even on
the most slippery ice.
The crossbow system helps
you absorb the impact
when hitting even the
biggest booters in or out
of the park. The Legend
is a whole lot of boot
for your money. It’s
refreshing to see forward
thinking technology go
into a boot of this
price. From the outsole,
to the liner, to the
lacing system, Northwave
consider the rider at
every stage of design.
You’ll really
appreciate it when you
get a pair on your feet!
Is it for me? The Legend
is Ideal for the
snowboarder looking for a
low cost boot and
doesn’t compromise on
comfort and durability.
Availability: In Stock
£99.95
Available
-
The reverse colour way of
this year’s ID is
definitely a bit of an
eye catcher (the black
and white are reversed
from left to right boot),
but its beauty is not
skin deep. Scratch
beneath the surface and
you discover that no part
of the ID had been
overlooked in providing
the best in performance
and comfort. From the
Dupont Surlyn Highback
that drastically improves
the boots durability to
the super high quality
Thermo Flex liner and New
D-Lug outsole which
cushions and cradles the
feet. Specification:
Thermo Flex Liners
featuring Shell Fixation,
Heel Harness and
E-Lacing Dupont Surlyn
Highbacks Waterproof
Shell Construction Power
Strap Section Control
Lacing Pro Flex
Construction Optional TPS
shield D-Lug Outsole
Flex: 5/10 (6 with TPS
Medium, 7 with TPS Hard)
Features: Thermo Flex
Liners are heat moulded
to your feet. Unlike many
other ‘fully
mouldable’ boot liners
that claim to mould using
the heat of your feet
alone, the Deeluxe
thermo liners are heated
using a specialist boot
fitter’s oven, and
achieve a genuinely
custom fit. We recommend
that all thermo liners
are fitted either in
store as part of our free
boot fitting service, or
at the very least heat
moulded by a professional
boot fitter for the
optimum fit. Thermo Flex
Liners feature a Heel
Harness that wraps around
your ankle, much like an
ankle brace to provide
firm, yet comfortable
support within your
liner. A Velcro shell
fixation prevents the
liner from moving within
the shell, allowing for
a consistent and strong
fit every time you put
your boots on. These
liners have E-lacing,
which is a super strong,
low friction lacing
system designed to be
comfortable and secure.
Dupont Surlyn Highbacks
form the core material
when constructing the
boot. Adding this
flexible, yet durable
plastic to the back of
the boot drastically
improves responsiveness
and durability. Combine
the Surlyn highbacks with
optional ‘TPS Shield’
for the ultimate
performance driven stiff
snowboard boot.
Waterproof Construction
by means of clever
stitching and sandwich
construction, water
hasn’t got a chance. A
Velcro Power Strap around
the top of the boot
ensures a secure fit
right to the top of
tongue. Section Control
Lacing allows you to
quickly adjust the
tightness of the boot in
three distinct zones
(Forefoot, heel,
calf). Toggle operated
with a locking catch,
they are super easy and
fast to get dialed in for
the perfect fit. Pro Flex
provides the perfect
blend of flex and
stability. The flex zone
in the joint area offers
maximum support whilst
eliminating bulging. TPS
Shields are optional
accessories. They are
effectively a secondary
boot tongue; available in
medium or stiff flex
options, which stiffen
the boot, improving
support and performance.
The new D-Lug outsole is
not just super light with
low profile sneaker
styling but it has
numerous design features
such as dual impact zones
and independent lug
suspension that improve
cushioning and support.
The ID is a fantastic
boot and is aimed at all
mountain freestyle
riders. Don’t be put
off by the
‘freestyle’ element
if you don’t throw back
flips at every
opportunity, the
mid-flex (with extra
stiffness available by
adding a TPS Shield)
meets the needs of a wide
ra
Availability: In Stock
£111.95
Available
-
With a flex rating
towards the higher end of
the scale (7/10) the
TM-Two is a solid and
supportive boot for those
looking for some real
performance. With some
great fit features such
as the Tongue Tension
System it’s no wonder
the TM-Two is the number
one choice for the pro
team (TM stands for
‘Team Model’).
Specification:
Performance Fit –
Medium to hard flex for
best possible performance
Level 3 Liner 100% Heat
Moldable Intuition Liners
Dual Density Intuition
Soft Touch foam for
comfort, warmth &
support Internal
anatomical foam overlays
in heel for optimal heel
hold External Power Wrap
overlays for support and
response Integrated
Velcro Closure reduces
bulk and pressure points
Level 3 Footbed Moulded
PU Footbed for ultimate
comfort Dual density PU
pod in the heel for
impact protection Moulded
TPU Heel cradle and arch
support Mesh topsheet for
comfort Flex (1-soft,
10-stiff): 7 Features
We’ve all heard of
using air bags in soles
to provide cushioning,
32 uses System G2 Gel
instead, which is less
affected by temperature
changes than airbags and
will not bottom out or
pop under impact. 3-D
Molded Tongue – Varies
in stiffness depending on
the boot giving a
customised flex and wraps
your foot for easier
lacing and better heel
hold. The Tongue Tension
System is a very cleaver
yet simple bit of tech.
It is basically a lace
loop that is runs from
the outside, through the
shell, to the tongue so
when you tighten your
laces it automatically
pulls the tongue down and
around your foot
centralising it and
improving the fit. In
order to drastically
reduce the weight of
their boots, Thirty Two
use an alternative to
having a traditional
(heavy) rubber outsole.
32 boots with STI
Evolution Foam are 15-40%
lighter than previous
seasons, remain the
lightest in the industry
and provide better
cushioning than
traditional foam
material. 100% Heat
Moldable Intuition Liners
– Come down to our show
room to buy your 32’s
and get them heat moulded
for a custom fit.
Articulating Cuff boots
have two distinct areas
to the boot; the clog
(lower section) and the
cuff (top section) When
you flex the boot, the
join between these two
areas can often pinch and
distort. 32 boots with an
articulating cuff
eliminate this issue by
allowing the top half of
the boot to flex freely
without distorting the
lower section. Lots of
companies only produce
the outer shell of the
boot in whole sizes and
use different sized
liners to create half
sizes. This boot has 1:1
Liner to Outsole Fit so
the Shell and liner are
true whole and half
sizes. The TM-Two are a
favourite with the Thirty
Two team riders and with
us at Bliss Snowboards,
our workshop manager
Harry rides in them. He
swears by the tongue
tension system to help
lock the foot down and
prefers a boot that is
towards the stiffer end
of the scale. This
season’s black and
green colour way is the
pro model for Scott
Stevens, if you
haven’t seen him ride
you are missing out on
some of the most creative
snowboarding to date –
check him out! Is it for
me? With a mid-stiff flex
these would suit someone
with at least a couple of
weeks rid
Availability: In Stock
£230.00
Available
-
With a stiff/medium flex
rating the TM-Two is a
solid and supportive boot
for those looking for
some real performance.
With some great fit
features such as the
Tongue Tension System
it’s no wonder the
TM-Two is the number one
choice for the pro team
(TM stands for ‘Team
Model’). Specification
Performance Fit –
Medium to hard flex for
the best possible
performance Level 3 Liner
• 100% Heat Moldable
Intuition foam Liners for
a custom fit • Dual
Density Intuition Soft
Touch Foam for comfort,
warmth & support •
Internal Anatomical Foam
Overlays in heel for
optimal heel hold •
Integrated Pockets for
Heel Hold Kit • Heel
Hold Kit included •
Neoprene Toe Cap to
reduce toe pressure •
Dual Power Wrap Velcro
Cuff Closure for support
and response Level 3
Footbed • Custom
Moulded Evolution Foam
for ultimate in
lightweight comfort •
Dual density Evolution
Foam Heel Pod for maximum
impact protection •
Moulded TPU Heel Cradle
and Arch Support
Flex: Stiff/Medium
Features We’ve all
heard of using air bags
in soles to provide
cushioning, 32
uses System G2
Gel instead, which is
less affected by
temperature changes than
airbags and will not
bottom out or pop under
impact. 3-D Molded
Tongue – Varies in
stiffness depending on
the boot giving a
customised flex and wraps
your foot for easier
lacing and better heel
hold. The Tongue Tension
System is a very cleaver
yet simple bit of tech.
It is basically a lace
loop that is runs from
the outside, through the
shell, to the tongue so
when you tighten your
laces it automatically
pulls the tongue down and
around your foot
centralising it and
improving the fit. In
order to drastically
reduce the weight of
their boots, Thirty Two
use an alternative to
having a traditional
(heavy) rubber outsole.
32 boots with High
Density Evolution
Foam are 15-40% lighter
than previous seasons,
remain the lightest in
the industry and provide
better cushioning than
traditional foam
material. 100% Heat
Moldable Intuition
Liners – Come down to
our show room to buy your
32’s and get them heat
moulded for a custom fit.
Articulating Cuff boots
have two distinct areas
to the boot; the clog
(lower section) and the
cuff (top section) When
you flex the boot, the
join between these two
areas can often pinch and
distort. 32 boots with an
articulating cuff
eliminate this issue by
allowing the top half of
the boot to flex freely
without distorting the
lower section. Lots of
companies only produce
the outer shell of the
boot in whole sizes and
use different sized
liners to create half
sizes. This boot has 1:1
Liner to Outsole Fit so
the Shell and liner are
true whole and half
sizes. The TM-Two are a
favourite with the Thirty
Two team riders and with
us at Bliss Snowboards,
our workshop manager
Harry rides in them. He
swears by the tongue
tension system to help
lock the foot down and
prefers a boot that is
towards the stiffer end
of the scale. Is it for
me? With a mid-stiff flex
these would suit someone
with at least a couple of
weeks riding under their
belt right up to those
who can throw down with
the pros. More aggressive
and heavier riders wil
Availability: In Stock
£139.95
Available
-
The simple styling and
skate style outsole may
be understated but the
Brisse boot is definitely
designed for standout
shredding. The Dupont
Surlyn Highback
drastically increases the
durability of the boot as
well as the 6/10 flex
rating. Custom Flex and
C3- Lacing allow you dial
in the flex and the high
quality Thermo Flex
Liners ensure the best
possible fit.
Specification: Thermo
Flex Liners featuring
Shell Fixation, Heel
Harness and E-Lacing
Dupont Surlyn Highbacks
Waterproof Shell
Construction Double Power
Strap C-3 Lacing Custom
Flex D-Lug Outsole Flex:
Medium Features: Thermo
Flex Liners can be heat
moulded to your feet. The
Deeluxe thermo liners are
heated using a specialist
boot fitter’s oven,
and achieve a genuinely
custom fit. We recommend
that all thermo liners
are fitted either in
store as part of our free
boot fitting service.
Thermo Flex Liners
feature a Heel Harness
that wraps around your
ankle, much like an
ankle brace to provide
firm, yet comfortable
support within your
liner. A Velcro shell
fixation prevents the
liner from moving within
the shell, allowing for
a consistent and strong
fit every time you put
your boots on. These
liners have E-lacing,
which is a super strong,
low friction lacing
system designed to be
comfortable and secure.
Dupont Surlyn Highbacks
form the core material
when constructing the
boot. Adding this
flexible, yet durable
plastic to the back of
the boot drastically
improves responsiveness
and durability.
Waterproof Construction
by means of clever
stitching and sandwich
construction, water
hasn’t got a chance. A
Double Power Strap around
the top of the boot
ensures a secure fit
right to the top of
tongue. C-3 Lacing allows
you to control the flex
you get by fastening the
different zones to
different degrees. With
one lace pull dedicated
to securing the heel and
ankle and the other for
the forefoot and shaft.
Custom Flex enables just
that. Adjust the support
and responsiveness to
your requires while using
the ankle lacing to
secure your foot. We are
big fans of Deeluxe boots
at Bliss Snowboards, for
the simple reason that
they ooze quality.
Deeluxe are an
independent company that
focuses all of their
efforts on crafting the
most durable and
comfortable boots on the
market. The Brisse is a
mid-price boot but the
quality of features,
construction and liner
would be top of the range
(and at a higher price)
if someone else made
them. We chose to stock
the Brisse with Thermo
flex liners that are a
little more expensive
than the alternative (PF
or CF liners). These are
a super high quality,
fully moldable liner.
It’s often said that
boots are the most
important bit of kit and
it could be argued that
liners are the most
important part of the
boot. Is it for me?
Chances are it is! Unless
you are looking for a
super-soft jib boot or a
super-stiff free-ride
boot then the Brisse will
have you more than
covered. It’s a great
all-rounder and you’d
be hard pushed to find
boots that are built as
well.
Availability: In Stock
£169.95
Available
-
The Lashed has been
32’s bestselling boot
year after year. The 1:1
Liner to Outsole fit is
setting the new standard
for snowboard boot
fitting – with true
half sizes, rather than
a small liner being put
in a larger shell.
Comfort, support and
style, the Lashed has it
all. Specification: Team
Fit – Medium flex
suitable the majority of
snowboarders worldwide,
including most of the
ThirtyTwo team Level 2
Liner • 100% Heat
Moldable Intuition Liners
• Dual Density
Intuition Soft Touch foam
for comfort, warmth &
support • Internal
anatomical foam overlays
in heel for optimal heel
hold • Integrated
pockets for heel hold kit
(heel hold kit not
included) • Neoprene
toe cap to reduce toe
pressure • Dual Power
Wrap Velcro Cuff Closure
Level 2 Footbed •
Moulded EVA for high
impact cushioning •
Lightweight providing
optimum performance •
Molded TPU Heel Cradle
and Arch Support Flex:
Medium Features 3-D
Molded Tongue – Varies
in stiffness depending on
the boot giving a
customised flex and wraps
your foot for easier
lacing and better heel
hold. The High Density
Evolution Foam Outsole is
lightweight and durable
providing some of the
most important qualities
in snowboard boots. 100%
Heat Moldable Intuition
Liners – Come down to
our show room to buy your
32’s and get them heat
moulded for a custom fit.
Articulating Cuff boots
have two distinct areas
to the boot; the clog
(lower section) and the
cuff (top section) When
you flex the boot, the
join between these two
areas can often pinch and
distort. 32 boots with an
articulating cuff
eliminate this issue by
allowing the top half of
the boot to flex freely
without distorting the
lower section. Lots of
companies only produce
the outer shell of the
boot in whole sizes and
use different sized
liners to create half
sizes. This boot has 1:1
Liner to Outsole Fit so
the Shell and liner are
true whole and half
sizes. Thirty Two built
their name on boots like
the Lashed; it’s
somewhat of a classic and
is everything we have
come to expect from a 32
boot. There aren’t any
gimmicks going here,
just well designed,
comfortable, light boots
and the Bradshaw colour
is a winner. I’m going
to riding the Lashed this
season. Is it for me?
With a mid flex these
suit all but the
hard-chargers amongst us.
It’s no coincidence
that they are the biggest
selling snowboard boot
worldwide. You can’t
really go wrong.
Availability: In Stock
£129.95
Available
-
The Lashed has been
32’s best selling boot
year after year. The 1:1
Liner to Outsole fit is
setting the new standard
for snowboard boot
fitting – with true
half sizes, rather than
a small liner being put
in a larger shell.
Comfort, support and
style, the Lashed has it
all. Specification: Team
Fit – Medium flex
suitable the majority of
snowboarder worldwide
Level 2 Liner 100% Heat
Moldable Intuition Liners
Dual Density Intuition
Soft Touch foam for
comfort, warmth &
support Internal
anatomical foam overlays
in heel for optimal heel
hold External overlays
for support and response
Integrated Velcro Closure
reduces bulk and pressure
points Level 2 Footbed
Moulded Ortholite
provides spring-back
technology, retaining
95% of its thickness over
time Lightweight
providing optimum
performance Foam contains
recycled rubber powder to
TR32D LIGHTLY Mesh
topsheet for comfort Flex
(1-soft, 10-stiff): 4
Features 3-D Molded
Tongue – Varies in
stiffness depending on
the boot giving a
customised flex and wraps
your foot for easier
lacing and better heel
hold. In order to
drastically reduce the
weight of their boots,
Thirty Two use an
alternative to having a
traditional (heavy)
rubber outsole. 32 boots
with STI Evolution Foam
are 15-40% lighter than
previous seasons, remain
the lightest in the
industry and provide
better cushioning than
traditional foam
material. 100% Heat
Moldable Intuition Liners
– Come down to our show
room to buy your 32’s
and get them heat moulded
for a custom fit.
Articulating Cuff boots
have two distinct areas
to the boot; the clog
(lower section) and the
cuff (top section) When
you flex the boot, the
join between these two
areas can often pinch and
distort. 32 boots with an
articulating cuff
eliminate this issue by
allowing the top half of
the boot to flex freely
without distorting the
lower section. Lots of
companies only produce
the outer shell of the
boot in whole sizes and
use different sized
liners to create half
sizes. This boot has 1:1
Liner to Outsole Fit so
the Shell and liner are
true whole and half
sizes. Thirty Two built
their name on boots like
the Lashed; it’s
somewhat of a classic and
is everything we have
come to expect from a 32
boot. There aren’t any
gimmicks going here,
just well designed,
comfortable, light boots
and the Bradshaw colour
is a winner. I’m going
to riding the Lashed this
season. Is it for me?
With a mid flex these
suit all but the
hard-chargers amongst us.
It’s no coincidence
that they are the biggest
selling snowboard boot
worldwide. You can’t
really go wrong.
Availability: In Stock
£195.00
Available
-
This crowning all
mountain freestyle
orientated boot is ready
to blow! A mix of
comfort, flex and
technology, all packaged
in a boot that delivers
pure quality. The TF3
liner keeps your foot
protected and warm while
the amazing 540 Hell
Retention System never
lets your foot slip
inside. This gives you
all the foothold and
support you need.
Innovative technology
provided by the
Hypershock sole provides
strong holding traction
and grip on even the most
slippery of surfaces.
Specification Tf3 Liner
540 Heel Retention System
Super Lace SL Flex Window
Hypershock Outsole
Features The Tf3 Liner is
made from Thermo-Fit
Foam. This new advanced
lining material with
target fit zones moulds
to the contours of your
foot with a heater or
over time from natural
body heat. It is
anatomically designed and
reinforced with injected
memory foam for better
retention and comfort for
the feet. Brand new
webbing naturally adapts
to the instep, thus
permitting the closest
fit, and distributing
power of transmission all
over the liner surface.
Includes a Velcro power
strap for an even better
fit. With the 540 Heel
Retention System the
bootlaces pass through
pre-curved lace loops in
the ankle area of the
boot. This means that
when the laces are pulled
to close the boot, they
are at the same time
pulling the webbings
where the lace loops are
linked. In this way the
webbings shrink around
the ankle, increasing
heel stability. The more
the lace is pulled the
more power will be
transferred in the ankle
area, increasing the
heel retention
performance and foot
stability. Super Lace SL
is a Speed Lacing System
that allows the closure
of two different boot
areas, the quarter part
and the collar part
(upper and lower), in
order to allow you to
select the perfect
feeling on each part and
improve comfort and foot
stability. Your boot will
be closed quickly and
will stay tight and
perform all day. The Flex
Window enhances the
comfort and mobility of
the foot, and it
perfectly combines the
balance between the power
of transmission and a
progressive flex. The
sides of the collar area
slide on the upper
transferring the power in
a constant way avoiding
any possible overlapping
between materials, which
could lead to a waste of
energy and distortion of
the boot shape. The
Hypershock Outsole
guarantees comfort and
high performance with
maximum weight reduction.
Innovative technology
designed by HYPERSHOCK
allows you to find strong
holding traction even on
the most slippery ice.
The crossbow system helps
you absorb the impact
when hitting even the
biggest booters in or out
of the park. Boots can
make of break a days
snowboarding. Get it
right and you’ll have
the time of your life,
which is why it’s well
worth considering the
Devine SL from Northwave.
There is no compromising
on heel-hold, grip,
comfort and support and
the feedback we’ve had
on them shows it’s
worth it! Is it for me?
The Devine SL are high
quality boots for women
looking for the highest
performance and comfort.
Availability: In Stock
£149.95
Available
-
Xavier De La Rue’s
signature boot. If that
alone is not enough to
establish the quality and
potential of this boot,
just take a peek at the
specifications and
features. Super
durable, stunning
attention to detail,
fantastic features and
only the best materials.
Designed with hiking,
touring and crampon
compatibility in mind,
this is the ultimate back
country snowboard boot.
Specification: Dupont
Surlyn Highbacks D-Tex
Membrane Waterproof shell
construction Thermo flex
liners, featuring shell
fixation, heel harness,
e lacing and peppermint
treatment Optional TPS
shield C3 lacing Power
strap Backwelt Vibram
Outsoles Flex:
Medium-Stiff (can be
increased with additional
TPS Shield – Sold
separately) Features
Dupont Surlyn Highbacks
form the core material
when constructing the
boot. Adding this
flexible, yet durable
plastic to the back of
the boot drastically
improves responsiveness
and durability of the
boot. Combine the Surlyn
highbacks with additional
‘TPS Shield’ for the
ultimate performance
stiff snowboard boot.
D-Tex membrane is
Deeluxe’s own
proprietary material
which is highly
waterproof and thermally
efficient, leaving your
feet warm and dry.
Waterproof Construction
by means of clever
stitching and sandwich
construction, water
hasn’t got a chance.
Asymmetric Flex is an
obvious, yet often
overlooked design feature
of a snowboard boot.
As snowboarders, we
require added stiffness
and support when applying
pressure to the outer
sides of our boots, with
more compliance required
on the inner side. TPS
Shields are optional
accessories (sold
separately. They are
effectively a secondary
boot tongue, available
in medium or stiff flex
options, they stiffen
the boot, improving
support and performance.
C-3 Lacing allows you to
control the flex you get
by fastening the
different zones to
different degrees. With
one lace pull dedicated
to securing the heel and
ankle and the other for
the forefoot and shaft.
Power Straps add a little
extra support by binding
around your calf. A small
area of moulded plastic
above the heel of the
boot on the outside, is
referred to as
a Backwelt. This allows
for use of crampons
without damage to the
rear of your boot. It
is also compatible with
semi automatic crampons.
Liners Thermo Flex Liners
feature a Heel Harness
that wraps around your
ankle, much like an
ankle brace to provide
firm, yet comfortable
support within your
liner. A Velcro shell
fixation prevents the
liner from moving within
the shell, allowing for
a consistent and strong
fit every time you put
your boots on. These
liners have E-lacing,
which is a super strong,
low friction lacing
system designed to be
comfortable and secure.
Thermoflex liners feature
a Velcro Shell Fixation,
which prevents the liner
from moving within the
shell, allowing for a
consistent and strong fit
every time you put your
boots on. A Heel Harness
wraps around your ankle,
much like an ankle brace
to provide firm, yet
comfortable support
within your liner. Thermo
flex liners are treated
with a peppermint
extracts to reduce
unpleasant foot odor.
Outsole Vibram Outsoles
are regarded as the
highest quality, lowest
weight and best grip
outsoles available on
snowboard boots. They are
highly designed in
construction, shape and
material. Vibram outsoles
inclu
Availability: In Stock
£247.95
Available
-
The Focus BOA is all
about focused fit and
support. With dual BOA
closures you can really
dial in your fit and the
stiff flex and durable
outsole makes it the go
to ThirtyTwo boot for
riders looking to ride
fast and get off-piste
whenever possible.
Specification Shell Dual
BOA Closure BOA External
Heel Support Performance
Backstay Articulating
Cuff 3D Molded Tongue
High Density Evolution
Foam Outsole with
Stabilizer Level 3 Liner
Level 3 Footbed Flex:
Stiff Features The Dual
BOA Closure allows you to
fine tune your fit and
flex with focused
lock-down in the ankle
area to secure your heel.
BOA External Heel Support
wraps around the back of
the boot increasing
response and support. A
backstay runs from your
heel up the back of your
boot. The Performance
Backstay offers a solid
flex and provides
durability. An
Articulated Cuff
eliminates shell
distortion when the boot
is flexed and increases
heel hold. The 3D Molded
Tongue improves comfort,
fit and flex. High
Density Evolution Foam
Outsole with Stabilizer
is lightweight, durable
and has rubber sections
on the perimeter of the
sole for stability. Level
3 Liner 100% Heat
Moldable Intuition Foam
allows the liner to be
heat molded in store for
a custom fit Dual Density
Intuition Foam for
comfort, warmth and
support Internal
Anatomical Foam Overlays
are strategically
positioned to provide the
optimal heel hold
Integrated Pockets for
Heel Hold Kit -
additional foam pads that
can be easily added and
changed for a customized
fit Neoprene Toe Cap
reduces toe pressure Dual
Power Wrap with Velcro
Cuff Closure for secure
and precise liner
fastening Level 3 Footbed
Custom Molded Evolution
Foam is ultra light
weight and comfortable
Molded TPU Heel Cradle
and Arch Support keeps
your foot in the right
position and supported
Dual Density Evolution
Foam Heel Pod for maximum
impact protection If you
are a powerful rider
these boots will reward
you with lightening quick
response and daylong
support. They probably
shouldn’t be your first
pair of boots if you’re
just getting into the
spot but more experienced
snowboarders will know if
they’re the kind of
person looking for a
stiff/supportive boot. If
you are then the Focus
BOA offers tons of tech,
customisable fit features
and durability. Is it for
me? Best suited
intermediate to advanced
snowboarders that ride
fast and aggressively.
ThirtyTwo have increased
the soles durability so
It’s a great option if,
like Jeremy Jones, you
hike for your turns.
Availability: In Stock
£172.95
Available
-
The Highline Boa boots
features the Boa Coiler
fastening system. A
single Boa dial fastens
when clicked in and
rotated clockwise and
releases when pulled out
it. The Coiler version
even takes up the slack
automatically so
fastening your boots
cannot be any easier.
Specification: Shrinkage
Footprint Reduction
Technology 1:1 Lasting
NEW Boa Coiler Closure
System Imprint 1 Liner
with Integrated Lacing
DynoLite Outsole with
Sleeping Bag Medium Flex
Tongue Total Comfort
Construction Snow-Proof
Internal Gusset Level 1
Moulded EVA Footbed
Response: Playful-Medium
Features Shrinkage
Footprint Reduction
Technology minimises the
overall size of the boot,
meaning that a men’s
size 10 fits like a size
10, but has the
footprint of a typical
size 9. The benefits are
a lighter, sleeker, and
shorter boot – no more
toe drag. All Burton
boots offer 1:1 Lasting,
which means every half
and full size liner gets
a matching half or full
size shell and outsole
for a precise fit. This
isn’t as common as you
would think in the world
of snowboard boots.
Lacing NEW Boa Coiler
Closure System is a
quick, easy and
effective closure system.
Simply click the dial in
and twist to tighten,
put the dial out to
release. The Boa Coiler
system automatically
takes up the slack for
even quicker fastening
than the standard Boa
system. Liner Imprint
1 Liner with Integrated
Lacing and inner lace
lock is heat mouldable
for a customised fit.
Cushioning/Traction
DynoLite Outsole provides
superior cushioning and
improved board feel in a
20% lighter construction.
The exclusive cushioning
compound is specially
formulated to withstand
repeated impacts and
freezing temperatures for
long lasting shock
absorption. NEW Sleeping
Bag is a reflective foil
that transfers heat back
into the foot. Level 1
Moulded EVA Footbed
offers lightweight and
long-lasting shock
absorption. Shell Medium
Flex Tongue helps to
provide the playful to
medium response. Total
Comfort Construction
provides a broken-in feel
right out the box
eliminating the break-in
period for a consistent
fit and feel from day
1-100. Snow-Proof
Internal Gusset is a
feature found on all
Burton boots. Attached to
the tongue, the gusset
completely seals the
lower zone of the boot,
keeping feet warm and
dry. Burton have
introduced Boa to their
boot line this season and
we are pleased to see
they have featured it on
this lower priced model.
The Highline Boa is a
great first boot or for
the occasional rider who
will feel comfortable in
a softer, more playful
flexing boot. Is it for
me? Great first pair of
boots or for the
occasional rider looking
for a soft boot at an
affordable price.
Availability: In Stock
£142.95
Available
-
The Lashed has been
32’s best selling boot
year after year, the
Lashed FT has everything
the Lashed has got but
with the new and improved
Fast Track Lacing System.
Reduced friction, four
zone Lacing, handle
storage and a one Piece
lock all add up to offer
a great fit in a quick
and easy package.
Specification: Level 2
Liner 100% Heat Moldable
Intuition Liners Dual
Density Intuition Soft
Touch foam for comfort,
warmth & support Internal
anatomical foam overlays
in heel for optimal heel
hold External overlays
for support and response
Integrated Velcro Closure
reduces bulk and pressure
points Level 2 Footbed
Moulded Ortholite
provides spring-back
technology, retaining
95% of its thickness over
time Lightweight
providing optimum
performance Foam contains
recycled rubber powder to
TR32D LIGHTLY Mesh
topsheet for comfort Flex
(1-soft, 10-stiff): 4
Features Fast Track
Lacing System –Reduced
friction and secure flip
lock, the lacing has a
four zone system making
it easier to achieve a
better fit. ThirtTwo
takes fit seriously. 3-D
Molded Tongue – Varies
in stiffness depending on
the boot giving a
customised flex and wraps
your foot for easier
lacing and better heel
hold. In order to
drastically reduce the
weight of their boots,
Thirty Two use an
alternative to having a
traditional (heavy)
rubber outsole. 32 boots
with STI Evolution Foam
are 15-40% lighter than
previous seasons, remain
the lightest in the
industry and provide
better cushioning than
traditional foam
material. 100% Heat
Moldable Intuition Liners
– Come down to our show
room to buy your 32’s
and get them heat moulded
for a custom fit.
Articulating Cuff boots
have two distinct areas
to the boot; the clog
(lower section) and the
cuff (top section) When
you flex the boot, the
join between these two
areas can often pinch and
distort. 32 boots with an
articulating cuff
eliminate this issue by
allowing the top half of
the boot to flex freely
without distorting the
lower section. Lots of
companies only produce
the outer shell of the
boot in whole sizes and
use different sized
liners to create half
sizes. This boot has 1:1
Liner to Outsole Fit so
the Shell and liner are
true whole and half
sizes. Thirty Two built
their name on boots like
the Lashed, it’s
somewhat of a classic and
is everything we have
come to expect from a 32
boot and now we have the
Lashed FT (Fast Track).
Some people are sceptical
about quick lacing
systems (when they’ve
never had them) but I’d
encourage you to try
them. I rode them all of
last season and you
forget how long it takes
to get regular laces as
secure. With Fast Track
you will be at the front
of the lift line or have
a few more minutes in bed
while everyone else is
crouched down tugging on
their laces. Is it for
me? With a mid flex these
suit all but the
hard-chargers amongst us.
It’s no coincidence
that they are the biggest
selling snowboard boot
worldwide. You can’t
really go wrong.
Availability: In Stock
£125.00
Available
-
This boot should become
the benchmark for what we
consider a light boot to
be. ThirtyTwo have taken
light to a new level
without compromising on
features such as the
articulating cuff, 3D
moulded tongue and 100%
heat Mouldable Intuition
liners. Specification:
Comfort Fit – The new
standard in out-of-box
fit. Medium to soft flex
Level 1 Liner • 100%
Heat Moldable Intuition
Liners • Single Density
Intuition Soft Touch foam
for comfort, warmth &
support • Integrated
Lacing system with Lace
Lock for improved heel
hold & fit • Internal
anatomical EVA overlays
in heel for optimal heel
hold • Aegis
anti-microbial coating to
eliminate odour Level 1
Footbed • EVA with
Serpa topsheet for warmth
and comfort •
Lightweight providing
optimum performance Flex:
Medium/Soft Features 3-D
Molded Tongue – Varies
in stiffness depending on
the boot giving a
customised flex and wraps
your foot for easier
lacing and better heel
hold. In order to
drastically reduce the
weight of their boots,
Thirty Two use an
alternative to having a
traditional (heavy)
rubber outsole. 32 boots
with High Density
Evolution Foam remain the
lightest in the industry
and provide better
cushioning than
traditional foam
material. 100% Heat
Moldable Intuition Liners
– Come down to our show
room to buy your 32’s
and get them heat moulded
for a custom fit at no
extra cost. Articulating
Cuff boots have two
distinct areas to the
boot; the clog (lower
section) and the cuff
(top section) When you
flex the boot, the join
between these two areas
can often pinch and
distort. ThirtyTwo boots
with an articulating cuff
eliminate this issue by
allowing the top half of
the boot to flex freely
without distorting the
lower section. Lots of
companies only produce
the outer shell of the
boot in whole sizes and
use different sized
liners to create half
sizes. This boot has 1:1
Liner to Outsole Fit so
the Shell and liner are
true whole and half
sizes. The Light is
essentially a stripped
down version of the
Lashed. The changes to
the liner and foot bed
save weight and also
bring the price down,
which means you’ll have
enough money for that new
jacket and a lift pass.
With the soft flex they
suit freestyle riders or
snowboarders with a
lighter build. Is it for
me? Ideal if you are
looking for a soft boot
for riding the park and
out of the box comfort.
Beginners that aren’t
used to having their feet
in snowboard boots will
appreciate the forgiving
feel of these boots.
Availability: In Stock
£124.95
Available
-
The Launch Boa packs a
lot of tech into a
classic freestyle boot.
There is a three part
lacing procedure for
getting the boot
fastened, the internal
liner lace with a quick
pull and flip lock,
STR8JKT with a quick pull
and lock and the external
BOA. The addition of
STR8JKT to the boots
fastening system provides
unparalleled support and
comfort and the
combination is quick,
functional and provides
superb fit.
Specification: Boa Coiler
Lacing STR8JKT Silver
Flex Liner Custom Fit
Liner Foam Mystic 1
Footbed Flightweight
Outsole Heel Grip
Washable Flex: Medium
(5/10) Features: Lacing:
BOA Coiler is a quick and
easy lacing solution.
Simply push the dial in
and rotate clockwise to
fasten and pull the dial
out to release. The newer
Coiler version of BOA
automatically draws in
the slack making it even
quicker than the
original. Lock your feet
down with the supreme
comfort of STR8JKT.
Featuring an additional
inner heel harness to
combat dreaded heel lift
and provide optimal
comfort. This is
controlled with an
external quick pull and
lock lace. Liner: The
Silver Flex Liner
displaces lace pressure
for the top of your foot,
around the holding areas
of the arch and above the
heel. Extra Mid Flex
padding over the ankle
provides comfort and
response. For increased
comfort and foothold
Custom Fit heat mouldable
foam is strategically
placed in the sensitive
areas of the foot, shin,
ankle and heel. Specific
cat-tongue like Heel Grip
material around your feel
keeps your socks from
slipping down and causing
pressure points. The
design process uses
materials that do not
need to be glued together
meaning these liners do
not deteriorate trough
washing. Cushioning:
The Mystic 1 Footbed
increases blood
circulation and prevents
fatigue. One of the
lightest outsoles in the
Salomon range, the new
EVA/Rubber compound of
the Flightweight Outsole
is specifically
engineered for an
extremely lightweight,
cushioning and
low-profile freestyle
feel. The launch BOA
offers fantastic value
for money. BOA, an
integrated liner lock and
the additional STR8JKT
feature don’t usually
come cheap but you get
them all in this £200
boot. Despite being
billed as a freestyle
boot the mid-flex and
premium fit makes it a
great all-rounder
suitable for the vast
majority of riders. Is it
for me? Perfect if
you’re looking for a
mid-flexing, do
everything (except break
the bank) boot with quick
but high performance
fastening.
Availability: In Stock
£155.95
Available
-
When the Ambush made its
debut a couple of season
ago it brought with it a
new compound outsole
which replaced the rubber
layer on the bottom. This
DynoLite Outsole makes a
20% weight saving,
withstands repeated
impacts and freezing
temperatures for long
lasting shock absorption.
Specification: Shrinkage
Footprint Reduction
Technology 1:1 Lasting
Speed Zone Lacing System
Imprint 3 Liner with
Focus Cuff and Rad Pad
DynoLite EST Optimized
Outsole with B3 Gel and
NEW Sleeping Bag Wishbone
Upper Cuff Oversized Flex
Notches Medium Flex
PowerUP Tongue NEW
GripLITE Backstay Total
Comfort Construction
Snow-Proof Internal
Gusset Level 2 Moulded
EVA Footbed with ESS
Support Shank and Aegis
Antimicrobial Coating
Response: Medium
Features: Shrinkage
Footprint Reduction
Technology minimises the
overall size of the boot,
meaning that a men’s
size 10 fits like a size
10, but has the
footprint of a typical
size 9. The benefits are
a lighter, sleeker, and
shorter boot – no more
toe drag. All Burton
boots offer 1:1 Lasting,
which means every half
and full size liner gets
a matching half or full
size shell and outsole
for a precise fit. This
isn’t as common as you
would think in the world
of snowboard boots.
Lacing Speed Zone Lacing
System is lightning fast
and allows you to
customise the fit of the
upper and lower zones in
seconds. Liner Imprint 3
Liner with: Focus Cuff
– Boosting heel-hold by
hugging the sweet spot
around your ankle. Rad
Pad and pre-curved panels
located where the inner
laces exert the most
pressure to keep your
feet comfortable and
secure. Velcro Heel Hold
System allows Velcro
backed J-bars to be added
to the inner cuff for
added support.
Cushioning/Traction
DynoLite Outsole provides
superior cushioning and
improved board feel in a
20% lighter construction.
The exclusive cushioning
compound is specially
formulated to withstand
repeated impacts and
freezing temperatures for
long lasting shock
absorption. EST Optimised
soles lower your centre
of gravity without
sacrificing cushioning
thanks to ultra-dampening
B3 Gel inserts NEW
Sleeping Bag is a
reflective foil that
transfers heat back into
the foot. Level 2 Moulded
EVA Footbed with ESS
Support Shank and Aegis
Antimicrobial Coating is
a big step above the
‘throwaway’ footbeds
supplied with some boots.
Shell Wishbone Upper Cuff
defies convention,
combining power and
freedom into one. With
Jumper Cables (the same
stuff used in high-end
Burton boards) on both
the medial and lateral
sides you get twice the
snap, rebound, and life
without sacrificing the
high tweak-ability of a
softer boot. Oversized
Flex Notches minimise
shell distortion and
allow for a smoother,
more fluid toe and heel
flex. PowerUP Tongue
provides greater rebound
and durability and comes
in three flex options.
The ION uses the Medium
Flex option. NEW GripLITE
Backstay is a weld
construction and printed
rubber backstay (running
up the back of the boot)
shaves weight and
enhances grip. The result
is more direct transfer
from boot to binding and
reduced fatigue. Total
Comfort Construction
provides a broken-in feel
right out the box
eliminat
Availability: In Stock
£169.95
Available
-
Burton invest a huge
amount of money in
research and development
which has produced some
real game changers over
the years. One of their
latest developments are
Infinite Ride Liners
exclusive their high-end
boots and a key feature
of the Ion. These
stitch-less liners are
built with a 3D moulding
process which elevates
the precise
out-of-the-box fit and
provides greater rebound
and cushioning that
won’t break down or
pack out. The convention
defying Infinite Ride
liners are a game
changer. Specification:
Shrinkage Footprint
Reduction Technology 1:1
Lasting Speed Zone Lacing
System Infinate Ride 4
Liner with NEW DRYRIDE
Heat Cycle Lining Tuff
Cuff Rad Pad Low-Profile
EST Optimised Midsole
featuring AutoCANT and
ReBounce Cushioning with
Sleeping Bag Firm Flex
PowerUP Tongue NEW
GripLITE Backstay Total
Comfort Construction
Outer Shell Pressure
Relief Panel Snow-Proof
Internal Gusset Level 2
Moulded EVA Footbed with
ESS Support Shank and
Aegis Antimicrobial
Coating Response:
Aggressive Features:
Shrinkage Footprint
Reduction Technology
minimises the overall
size of the boot,
meaning that a men’s
size 10 fits like a size
10, but has the
footprint of a typical
size 9. The benefits are
a lighter, sleeker, and
shorter boot – no more
toe drag. All Burton
boots offer 1:1 Lasting,
which means every half
and full size liner gets
a matching half or full
size shell and outsole
for a precise fit. This
isn’t as common as you
would think in the world
of snowboard boots.
Lacing Speed Zone Lacing
System is lightning fast
and allows you to
customise the fit of the
upper and lower zones in
seconds. Liner Sewn
liners are an industry
standard, Burton have
broken the mould with the
stitch-less Infinate Ride
4 Liner. With elevated
out-of-the-box comfort
and greater rebound
cushioning that won’t
break down or pack out.
The breathable NEW
DRYRIDE Heat Cycle inner
liner material utilises
interwoven thermally
activated carbon fibre to
capture, radiate and
reflect body heat inward,
while wicking
heat-robbing moisture
outward for all day
comfort. Tuff Cuff
provides the ankle and
inner cuff stability that
is mandatory on a
pro-level boot.
Increasing heel hold,
Tuff Cuff wraps the ankle
with medial and lateral
support while still
flexing freely from toe
to heel. Rad Pad are
pre-curved panels located
where the inner laces
exert the most pressure
to keep your feet
comfortable and secure.
Velcro Heel Hold System
allows Velcro backed
J-bars to be added to the
inner cuff for added
support.
Cushioning/Traction
Low-Profile EST Optimised
Midsole provides a more
direct board connection
through a lower profile
and reduced ramp angle
(more like a skateboard
shoe and less like a
running shoe). EST lowers
your centre of gravity
without sacrificing
cushioning thanks to
ultra-dampening B3 Gel
inserts. AutoCANT
Cushioning is a
dual-density EVA outsole
which allows your foot to
settle into a more
natural and relaxed
position, resulting in
improved comfort,
reduced fatigue and more
direct board control. NEW
ReBounce Cushioning adds
even more comfort and
warmth with an additional
two layer 3D laminate of
cushy PU plus reflective
material. This not only
reduces chatter, but
reflects heat inwards.
Sleeping Bag is a
reflective foil that
transfers heat back into
the foot.
Availability: In Stock
£239.95
Denmark