Zalman S5 computer case delivers clean, elegant minimalist design with unique RGB light against the dot grill on the solid steel front panel that just enhances overall look & feel of the entire case. RGB lightning is also on the side of the case further enhancing gaming credentials of Zalman S5 case. Zalman S5 is structured for optimal airflow & thermal performance is further enhanced with two preinstalled 120mm fans, one of them being RGB. Premium look & feel are also achieved by providing 4mm thick side panel made from premium tempered glass Going inside we can find that Zalman S5 can accommodate bracket for vertical mount of 240mm AIO water cooler with maximum radiator thickness of 65mm, & at the front of panel there is room for 3 x 120mm fans. Zalman S5 can accommodate GPU with total length of 340mm & CPU cooler that does not exceed 163 mm in height & at the top of the case it is possible to install 240mm radiator. Zalman S4 provides excellent cable management for nice & clean internal look aiding excellent air flow trough the chassis. At the bottom of the case there is shroud covered PSU bay that can accommodate PSU with length of up to 190 mm. Features RGB Illuminated front grill & side. Tempered Glass side panel. Vertical Bracket for 240mm radiator. Rear Cable management panel. Support for ATX, Micro-ATX & Mini-ITX motherboards. User friendly top I/O. RGB control button on the right side. Included 2x 120mm fans. ...

The Zalman ZM-SF120 RGB 120mm Case Fan features a dual flow structure to increase the CFM by pulling the wind from the outside to the inside & increasing the wind straightness to create strong coooling performance. Noise & vibration is minimised thanks to the style & the fluid dynamic bearings. Supports motherboards addressable RGB sync (3 pin). Technical Specifications

Dimensions :120 x 120 x 26 (H)mm Weight: 100g Materials :PC, PBT, Acryl Bearing Type: FDB (Fluid Dynamic Bearing) Fan Speed: 800 ~ 1, 500 RPM ±10% Max Noise Level: 28.0 d B (A) ±10% Max Airflow :54 CFM Pin Connector: 4-Pin (PWM), 3-Pin (Addressable) Max Air Pressure: 1.1mm H2O Life Span: 100, 000 hours

...

Zalman ZM-SF120A3 RGB Case Fan Triple Pack + Z-Sync Hub features Zalmans patended technology Dual Blade Impeller. The dual flow structure generated by Zalman increases the CFM by pulling the winnd from the outside to the inside & increases the wing straightness to create strong cooling performance. In addition, the fan has efficient airlow & has low noise. The fan also supports motherboards addressable RGB sync via 3-pin, by connecting to the motherboard you can choose from various colours & colour synchronisation can be done via software. The hub features 8 addressable RGB connectors to make choose your own lighting effects! Technical Specifications Bearing Type :FDB (Fluid Dynamic Bearing)

Dimensions :120*120*26 (H)mm Weight :100g Rating Voltage: Fan: 12 V DC LED: 5 V DC Rating Current: Fan: 200m A LED: 300m A Fan Speed: 800~1, 500 RPM±10% Max Airflow: 54 CFM Max Noise Level: 28.0 d B (A) ±10% Life Span :100, 000 hrs Connector: 4-Pin (PWM) 3-Pin (Addressable) Cable Length: Fan: 700mm LED: 700mm Components: Gigabyte M/B Convertor*1, Low Noise Connector*1, Push-Pins*4 (for PC Case), Screw Bolts*4

Materials: PC, PBT, Acryl Dimension: 79 x 49 x 12 (H) mm Weight 48g LED
Colours: RGB Operating Voltage: 5 V DC RGB Channel: 8CH RGB Rated Voltage: 5 V DC RGB Rated Current: 4A (Total) Components: Z-Sync x 1, Triple Fan Cable x 1, Mini USB (Universal Serial Bus) 5-Pin to USB (Universal Serial Bus) 2.0 Pin Header x 1




...

The Zalman ZM-SF140 RGB 140mm Case Fan features a dual flow structure to increase the CFM by pulling the wind from the outside to thhe inside & increasing the wind straightness to create strong coooling performance. Noise & vibration is minimised thanks to the style & the fluid dynamic bearings. Supports motherboards addressable RGB sync (3 pin). Technical Specifications:

Dimensions :140 x 140 x 26 (H)mm Weight :120g

Materials: PC, PBT, Acryl Bearing Type: FDB (Fluid Dynamic Bearing) Fan Speed: 800 ~ 1, 500 RPM ±10% Max Noise Level :29.0 d B (A) ±10% Max Airflow :61 CFM Pin Connector: 4-Pin (PWM), 3-Pin (Addressable) Max Air Pressure: 1.1mm H2O Life Span: 100, 000 hours



...

Zalman ZM-SF140A3 RGB Case Fan Triple Pack + Z-Sync Hub features Zalmans patended technology Dual Blade Impeller. The dual flow structure generated by Zalman increases the CFM by pulling the winnd from the outside to the inside & increases the wing straightness to create strong cooling performance. In addition, the fan has efficient airlow & has low noise. The fan also supports motherboards addressable RGB sync via 3-pin, by connecting to the motherboard you can choose from various colours & colour synchronisation can be done via software. The hub features 8 addressable RGB connectors to make choose your own lighting effects! Technical Specifications Bearing Type: FDB (Fluid Dynamic Bearing)

Dimensions :140*140*26 (H)mm Weight: 130g Rating Voltage: Fan: 12 V DC LED: 5 V DC Rating Current: Fan: 200m A LED: 300m A Fan Speed :800~1, 500 RPM ±10% Max Airflow: 61 CFM Max Noise Level :29.0 d B (A) ±10% Life Span :100, 000hrs Connector: 4-Pin (PWM) 3-Pin (Addressable) Cable Length: Fan: 700mm LED: 700mm Components: Gigabyte M/B Convertor*1, Low Noise Connector*1, Push-Pin *4 (for PC Case), Screw Bolts*4 Model: Z-Sync Materials :PC, PBT, Acryl Dimension :79 x 43 x 12 (H) mm Weight: 48 g LED
Colours: RGB Operating Voltage :5V DC RGB Channel :8CH RGB Rated Voltage: 5V DC RGB Rated Current :4A (Total) Components: Z-Sync x 1, Triple Fan Cable x 1, Mini USB (Universal Serial Bus) 5-Pin to USB (Universal Serial Bus) 2.0 Pin Header x 1


...

Effectively keeps HDD cool & reduces internal heat through the front vent. Up to four fans can be mounted including one back standard-equipped fan. Supports bottom PSU installation for effective cooling of PSU & inner space of case luxurious interior with black coating finishing touch.. USB (Universal Serial Bus) 3.0 ports, audio socket, power & rest buttons set in the front for user convenience. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Efficient layout allows the installation of Micro-ATX/ Mini ITX main board & VGA/PSU/ODD, despite of its slim design. Dust filters installed on the front, side & bottom prevent dust from entering. 250mm~300mm high performance VGA card can be installed. Safe edge molding for safer installing environment. Easily install HDD & SSD at the same time. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. No need to touch the M/B for CPU cooler replacement through CPU cooler mounting holes. Cable holes also provided for neat cable management Provides spacious interior with 4 PCI extension slots. Enclosure Type ATX Mini Tower Case Dimensions 189 x 427.5 x 364mm Motherboards Micro ATX / Mini ITX Power Supply Unit Standard ATX / ATX 12V PCI/AGP Card Compatiblility up to 250~300mm Expansion Slots 4 slot Color Black Drive Bays 5.25" External Bay x 1 3.5" Internal Bay x 2 2.5" Internal Bay x 3 Cooling Components (Fans) Rear 1 x 92 (80)mm Fan (Standard) Front 1 x 120mm Fan (Optional) Side 2 x 120mm Fan (Optional) I/O Ports 1 x Microphone, 1 x Headphones, 1 x USB (Universal Serial Bus) 3.0, 1 x USB (Universal Serial Bus) 2.0 ...

Up to four fans can be mounted including one back standard-equipped fan. Supports bottom PSU installation for effective cooling of PSU & inner space of case luxurious interior with black coating finishing touch.. USB (Universal Serial Bus) 3.0 ports, audio socket, power & rest buttons set in the front for user convenience. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Efficient layout allows the installation of Micro-ATX/ Mini ITX main board & VGA/PSU/ODD, despite of its slim design. Dust filters installed on the front, side & bottom prevent dust from entering. 250mm~300mm high performance VGA card can be installed. Safe edge molding for safer installing environment. Easily install HDD & SSD at the same time. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. No need to touch the M/B for CPU cooler replacement through CPU cooler mounting holes. Cable holes also provided for neat cable management Provides spacious interior with 4 PCI extension slots. Specifications Enclosure Type ATX Mini Tower Case Dimensions 189 x 427.5 x 364mm Motherboards Micro ATX / Mini ITX Power Supply Unit Standard ATX / ATX 12V PCI/AGP Card Compatiblility up to 250~300mm Expansion Slots 4 slot Color Black Drive Bays 5.25" External Bay x 1 3.5" Internal Bay x 2 2.5" Internal Bay x 3 Cooling Components (Fans) Rear 1 x 92 (80)mm Fan (Standard) Front 1 x 120mm Fan (Optional) Side 2 x 120mm Fan (Optional) I/O Ports 1 x Microphone, 1 x Headphones, 1 x USB (Universal Serial Bus) 3.0, 1 x USB (Universal Serial Bus) 2.0 ...

The Zalman T6 mid tower computer case comes with front mesh optimised for air circulation whose hairline pattern brings out modern & stylish finish. T6s chassis is made from high strength steel sheet & is excellent in high pressure & heat environment. The black painting with powder coating applied throughout the chassis is highly corrosion resistant & practical. Behind front mesh, that also acts as air filter, T6 can accommodate two 120-millimeter fan, & beside pre-installed 120mm rear fan, cooling can be boosted even further by installing one more 120mm fan on the side panel. Externally, a 5.25-inch drive can be installed, suitable for optical drives or fan controllers. Inside, two 3.5-inch & 2.5-inch drives fit together, & two more 2.5-inch drives on the floor or behind the motherboard tray. The second 3.5-inch drive can be installed instead of the front fan. T6 provides enough space for 7 expansion slots & graphics cards with length of up to 280 mm although if graphics card is installed in the front of the HDD drive that is reduced to 260mm. The I / O panel is located on the front of the lid & features a USB (Universal Serial Bus) 3.0 port, two USB (Universal Serial Bus) 2.0 ports & the usual audio jacks. Features Unique Hairline pattern design front panel. Powder coated black finish. USB (Universal Serial Bus) 3.0 & 2.0 ports on the easy access top panel. Support for Mini ITX, m ATX & ATX motherboards. Supports a max CPU cooler height of 165mm. Support for 280mm long GPUs. ...

Technical Specifications Model: ZM700/800/1000/1200-EBT II Efficiency: Max 91% @230 VAC, Typical Load Dimensions: 160 (L) x 150 (W) x 86 (H) mm MTBF: 100, 000 Hours Weight:3.08 Kg/3.12 Kg/3.24 Kg/3.24kg Operating Temperature: 0~40 &8451; Type: Intel ATX 12V ver. 2.31 Protection: OCP/ OPP/ OVP/ OTP / UVP / SCP PFC: Active PFC (<0.9) Regulatory: UL, FCC, KC, CE, CB, Ro HS, EAC Input Voltage: 100-240 VAC Input Current: 10-5A Input Frequency: 50-60 Hz Fan

Size: 135mm Cables (Connector) Mainboard (Sense Connector 1ea) Cable X 1 EPS Cable X 2 PCI Express Cable X 5 LDE (Connector 3ea) + FDD (Connector 1ea) Cable X 1 S-ATA Cable X 2 Fan Bearing: Two Ball Bearing

...

With the Zalman Watt Tera you can enjoy a fully modular PSU with 80 plus Gold certification. A fully modular design minimises resistance & voltage drop on the cables & lowers impendance to further enhance energy efficiecy. The PSU also features flat cables, unlike sleeved cables, flat cables make it easier to organise when building your system. Key

Features: Full Modular PSU Integrated advanced design method of Sense 6-pin to reduce voltage fluctuation to within 3% All cables are flat, easy cable management Up to 92% energy conversion efficiency Active PFC with 99.9% Maximum Power Factor Aluminium high Performance Solid Japanese Capacitor that Handles up to 221&730;F Built-in EMI Filter for Noise Reduction 12V DC-to-DC Convertor with 99.43 Availability Multiple Protection Circuit System Highly Energy-Efficient Standby Power Supply, 0.5W (Er P Lot 6 Certified) Technical Specifications Efficiency: Max 91% @ 230 VAC, Typical Load

Dimensions :160 (L) x 150 (W) x 86 (H) mm MTBF: 100, 000 Hours Weight: 3.48kg Operating Temperature: 0~40 &8451; Type: Intel ATX 12V ver.2.31 Protection: OCP/ OVP/ OPP/ OTP/ UVP/ SCP PFC Active: PFC (<0.9) Regulatory :UL, FCC, CB, CE, KC, EAC, Ro HS Input Voltage: 115- 240 VAC Input Current: 12-6A Input Frequency: 50-60 Hz Fan

Size: 135mm Cables: (Connector) Mainboard (Sense Connector 1ea) Cable X 1 EPS Cable X 2 PCI Express Cable X 8 IDE (Connector 3ea) + FDD (Connector 1ea) Cable X 1 S-ATA Cable X 3 Bearing: Two Ball Bearing 80 PLUS Gold





...