4/3-FAN structured to cool down the system efficiently (2 addtional fans can be installed) Maximizes the air flow keeping the HDD & the system cool. According to the user needs control fan speed up to 6 fans. Supports bottom PSU installation for effective cooling of PSU & inner space of case. Dash board style user-centered design provides style convenience. Dust filters on the bottom & front prevent dust from entering. 2 USB (Universal Serial Bus) 3.0 port that speed up to 5 Gbps. One touch tool-free ODD bay for easy & quick installation. USB (Universal Serial Bus) ports, audio socket, power & reset buttons set on the front for user convenience. Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Supports HDD Hot Swap bay for easy installation even during the operation. Side Acryl Tuning provided for users to view the interior. luxurious interior with black coating finishing touch. 3in 1 Adapter Tray is provided for installing FDD / 3.5' HDD / 2.5' HDD/SSD. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Multi guide provided to prevent VGA card from bending & for installation for additional fans. Without the side guide 300mm high performance VGA card can be installed. Module design for convenient installation of SSD & HDD. Front detachable Tool Free ODD bay for convenient installation. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case. Cable hole provided for efficient use of the space. Up to 7 PCI slots scalability secured Enclosure Type
- ATX Mid Tower

Dimensions
- 207 (W) x 533 (H) x 541 (D)mm Weight
- 9kg (19.84lb) Materials
- Plastic, Steel Motherboard Compatibility
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V VGA Card
- Full Size (300mm/11.8inch) Drive Bays 5.25'
- External Bay x 6 Hot-swap
- 3.5' Support Hot-swap x 3 Common (3in-1)
- Internal Bay 5.25'/3.5'/2.5' x 1 Cooling Components (Fans) Font
- 92mm Fan Bracket x 1 (1 Fan Included) Rear
- 120mm Fan Vent x 1 (1 Fan Included) Top
- 120mm Fan Vent x 2 (1 LED Fan Included, 1 Fan Optional) Cooling Kit (internal)
- 92mm Additional Fan Provided x 1 (1 Fan Included) Bottom 120mm Fan Vent x 1 (1 Fan Optional) Fan Controller
- Simultaneously Control 6 Expansion Card Slots
- 7 I/O Ports
- Headphones x 1, Mic x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 x 2 Color
- Black



















...

Zalman Reserator 3 MAX Ultimate Liquid CPU Cooler Zalman with its unique technology came up with the world first nanofluids refrigerant applied cooler to maximize the cooling performance. Zalman with its unique technology came up with the world first nanofluids refrigerant applied cooler to maximize the cooling performance. Using nanofluids coolant improves thermal conductivity by mixing nanoparticles with fluids. Nm (nanometer): an SI unit of length, equal to 10?9?m (a billionth of a meter). Slim fin pure cooper dual radial radiator designed for optimized air flow. Four times more powerful cooling efficiency with two copper pipes- Quadro cooling path system. Pure cooper water block & inner micro-fin applied for quick heat transfer. Built-in low noise/ high performance pump inside the water block, minimized the tube connection & helps to speed up the circulation of the coolant for optimized cooling performance. Induction of the airflow inside the case increases cooling efficiency of the motherboard & VRM. Blue LED on the water block & the radiator fan is applied to create the luxurious & powerful image. Extra 120mmfan can be mounted for more powerful performance. (Extra fan available for purchase.) Coolant is already placed inside the confined product, it can be used semi-permanently without replacement or separate maintenance. Features Up to 400 watts cooling performance using dual radiators & nanofluids High performance integrated water pump & nickel-plated radiator Blue LED lighting effect on both the pump & the fan Compatible with most desktop CPU sockets & mid-tower cases ...

The Reserator 1 V2 incorporates Zalman’s HCET (High Capacity Extrusion Technique) technology, high efficiency cooling technology, & optimal heat dissipation design for exceptional cooling performance even through natural convection cooling. The Reserator 1 V2 is a fanless water cooling system that unites the functions of a reservoir, radiator, & water pump into one system for easy operation. It is anodized & comes with a custom coolant to prevent corrosion. 100% fanless Reserator watercooling unit Supplied with CPU water block (ZM-WB5) Supplied with VGA water block (ZM-GWB3) Supplied with anti-corrosion coolant (ZM-G200) Supplied with quick release couplings & clear tubing Northbridge waterblock available separately (ZM-NWB1) Reserator watercooling unit “ Reserator” is a compound word derived from ‘ Reservoir’ & ‘ Radiator’
- it acts as a reservoir while radiating heat. This product works well with natural convection & integrates a water pump inside for convenience.
- Dissipation Area: 1, 274m 2
- Weight: 6.5kg
-

Dimensions: 150 (L) x 150 (W) x 592 (H) mm
- Material: Anodized Pure Aluminum
- Coolant Capacity: Max. 2.5L
- Integrated Water Pump: 5 W, Qmax 300L/h (A type: 230V-50 Hz, B type: 120V-60 Hz, : C type: 220V-60 Hz, D type: 110V-60 Hz)
- Maximum Lift: 0.5m CPU water block (ZM-WB5) The CPU Water Block incorporates a pure copper base for excellent heat transfer. The Water Block Cover has been anodized to prevent corrosion. It supports Intel s Socket 775 CPUs & AMD s Socket 754/939/940/AM2 CPUs, & is designed to be light weight & easy to install VGA water block (ZM-GWB3) The VGA Water Block incorporates a light weight pure aluminum base for high cooling performance, & is anodized & coated to prevent corrosion. It also incorporates revolving fittings that provide freedom in direction when connecting them with the tubes, which further allows simple installation.









...

Zalman S5 computer case delivers clean, elegant minimalist design with unique RGB light against the dot grill on the solid steel front panel that just enhances overall look & feel of the entire case. RGB lightning is also on the side of the case further enhancing gaming credentials of Zalman S5 case. Zalman S5 is structured for optimal airflow & thermal performance is further enhanced with two preinstalled 120mm fans, one of them being RGB. Premium look & feel are also achieved by providing 4mm thick side panel made from premium tempered glass Going inside we can find that Zalman S5 can accommodate bracket for vertical mount of 240mm AIO water cooler with maximum radiator thickness of 65mm, & at the front of panel there is room for 3 x 120mm fans. Zalman S5 can accommodate GPU with total length of 340mm & CPU cooler that does not exceed 163 mm in height & at the top of the case it is possible to install 240mm radiator. Zalman S4 provides excellent cable management for nice & clean internal look aiding excellent air flow trough the chassis. At the bottom of the case there is shroud covered PSU bay that can accommodate PSU with length of up to 190 mm. Features RGB Illuminated front grill & side. Tempered Glass side panel. Vertical Bracket for 240mm radiator. Rear Cable management panel. Support for ATX, Micro-ATX & Mini-ITX motherboards. User friendly top I/O. RGB control button on the right side. Included 2x 120mm fans. ...

The Zalman ZM-SF120 RGB 120mm Case Fan features a dual flow structure to increase the CFM by pulling the wind from the outside to the inside & increasing the wind straightness to create strong coooling performance. Noise & vibration is minimised thanks to the style & the fluid dynamic bearings. Supports motherboards addressable RGB sync (3 pin). Technical Specifications

Dimensions :120 x 120 x 26 (H)mm Weight: 100g Materials :PC, PBT, Acryl Bearing Type: FDB (Fluid Dynamic Bearing) Fan Speed: 800 ~ 1, 500 RPM ±10% Max Noise Level: 28.0 d B (A) ±10% Max Airflow :54 CFM Pin Connector: 4-Pin (PWM), 3-Pin (Addressable) Max Air Pressure: 1.1mm H2O Life Span: 100, 000 hours

...

The Zalman ZM-SF140 RGB 140mm Case Fan features a dual flow structure to increase the CFM by pulling the wind from the outside to thhe inside & increasing the wind straightness to create strong coooling performance. Noise & vibration is minimised thanks to the style & the fluid dynamic bearings. Supports motherboards addressable RGB sync (3 pin). Technical Specifications:

Dimensions :140 x 140 x 26 (H)mm Weight :120g

Materials: PC, PBT, Acryl Bearing Type: FDB (Fluid Dynamic Bearing) Fan Speed: 800 ~ 1, 500 RPM ±10% Max Noise Level :29.0 d B (A) ±10% Max Airflow :61 CFM Pin Connector: 4-Pin (PWM), 3-Pin (Addressable) Max Air Pressure: 1.1mm H2O Life Span: 100, 000 hours



...

Zalman ZM-SF140A3 RGB Case Fan Triple Pack + Z-Sync Hub features Zalmans patended technology Dual Blade Impeller. The dual flow structure generated by Zalman increases the CFM by pulling the winnd from the outside to the inside & increases the wing straightness to create strong cooling performance. In addition, the fan has efficient airlow & has low noise. The fan also supports motherboards addressable RGB sync via 3-pin, by connecting to the motherboard you can choose from various colours & colour synchronisation can be done via software. The hub features 8 addressable RGB connectors to make choose your own lighting effects! Technical Specifications Bearing Type: FDB (Fluid Dynamic Bearing)

Dimensions :140*140*26 (H)mm Weight: 130g Rating Voltage: Fan: 12 V DC LED: 5 V DC Rating Current: Fan: 200m A LED: 300m A Fan Speed :800~1, 500 RPM ±10% Max Airflow: 61 CFM Max Noise Level :29.0 d B (A) ±10% Life Span :100, 000hrs Connector: 4-Pin (PWM) 3-Pin (Addressable) Cable Length: Fan: 700mm LED: 700mm Components: Gigabyte M/B Convertor*1, Low Noise Connector*1, Push-Pin *4 (for PC Case), Screw Bolts*4 Model: Z-Sync Materials :PC, PBT, Acryl Dimension :79 x 43 x 12 (H) mm Weight: 48 g LED
Colours: RGB Operating Voltage :5V DC RGB Channel :8CH RGB Rated Voltage: 5V DC RGB Rated Current :4A (Total) Components: Z-Sync x 1, Triple Fan Cable x 1, Mini USB (Universal Serial Bus) 5-Pin to USB (Universal Serial Bus) 2.0 Pin Header x 1


...

High performance thermal paste ZM-STC9
- Supplied in a 4g syringe with graduation
- Composed of: Alumina, Alminium, Zinc Oxide
-


...

Effectively keeps HDD cool & reduces internal heat through the front vent. Up to four fans can be mounted including one back standard-equipped fan. Supports bottom PSU installation for effective cooling of PSU & inner space of case luxurious interior with black coating finishing touch.. USB (Universal Serial Bus) 3.0 ports, audio socket, power & rest buttons set in the front for user convenience. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Efficient layout allows the installation of Micro-ATX/ Mini ITX main board & VGA/PSU/ODD, despite of its slim design. Dust filters installed on the front, side & bottom prevent dust from entering. 250mm~300mm high performance VGA card can be installed. Safe edge molding for safer installing environment. Easily install HDD & SSD at the same time. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. No need to touch the M/B for CPU cooler replacement through CPU cooler mounting holes. Cable holes also provided for neat cable management Provides spacious interior with 4 PCI extension slots. Enclosure Type ATX Mini Tower Case Dimensions 189 x 427.5 x 364mm Motherboards Micro ATX / Mini ITX Power Supply Unit Standard ATX / ATX 12V PCI/AGP Card Compatiblility up to 250~300mm Expansion Slots 4 slot Color Black Drive Bays 5.25" External Bay x 1 3.5" Internal Bay x 2 2.5" Internal Bay x 3 Cooling Components (Fans) Rear 1 x 92 (80)mm Fan (Standard) Front 1 x 120mm Fan (Optional) Side 2 x 120mm Fan (Optional) I/O Ports 1 x Microphone, 1 x Headphones, 1 x USB (Universal Serial Bus) 3.0, 1 x USB (Universal Serial Bus) 2.0 ...

Up to four fans can be mounted including one back standard-equipped fan. Supports bottom PSU installation for effective cooling of PSU & inner space of case luxurious interior with black coating finishing touch.. USB (Universal Serial Bus) 3.0 ports, audio socket, power & rest buttons set in the front for user convenience. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Efficient layout allows the installation of Micro-ATX/ Mini ITX main board & VGA/PSU/ODD, despite of its slim design. Dust filters installed on the front, side & bottom prevent dust from entering. 250mm~300mm high performance VGA card can be installed. Safe edge molding for safer installing environment. Easily install HDD & SSD at the same time. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. No need to touch the M/B for CPU cooler replacement through CPU cooler mounting holes. Cable holes also provided for neat cable management Provides spacious interior with 4 PCI extension slots. Specifications Enclosure Type ATX Mini Tower Case Dimensions 189 x 427.5 x 364mm Motherboards Micro ATX / Mini ITX Power Supply Unit Standard ATX / ATX 12V PCI/AGP Card Compatiblility up to 250~300mm Expansion Slots 4 slot Color Black Drive Bays 5.25" External Bay x 1 3.5" Internal Bay x 2 2.5" Internal Bay x 3 Cooling Components (Fans) Rear 1 x 92 (80)mm Fan (Standard) Front 1 x 120mm Fan (Optional) Side 2 x 120mm Fan (Optional) I/O Ports 1 x Microphone, 1 x Headphones, 1 x USB (Universal Serial Bus) 3.0, 1 x USB (Universal Serial Bus) 2.0 ...