Zalman ZM-SF140A3 RGB Case Fan Triple Pack + Z-Sync Hub features Zalmans patended technology Dual Blade Impeller. The dual flow structure generated by Zalman increases the CFM by pulling the winnd from the outside to the inside & increases the wing straightness to create strong cooling performance. In addition, the fan has efficient airlow & has low noise. The fan also supports motherboards addressable RGB sync via 3-pin, by connecting to the motherboard you can choose from various colours & colour synchronisation can be done via software. The hub features 8 addressable RGB connectors to make choose your own lighting effects! Technical Specifications Bearing Type: FDB (Fluid Dynamic Bearing)

Dimensions :140*140*26 (H)mm Weight: 130g Rating Voltage: Fan: 12 V DC LED: 5 V DC Rating Current: Fan: 200m A LED: 300m A Fan Speed :800~1, 500 RPM ±10% Max Airflow: 61 CFM Max Noise Level :29.0 d B (A) ±10% Life Span :100, 000hrs Connector: 4-Pin (PWM) 3-Pin (Addressable) Cable Length: Fan: 700mm LED: 700mm Components: Gigabyte M/B Convertor*1, Low Noise Connector*1, Push-Pin *4 (for PC Case), Screw Bolts*4 Model: Z-Sync Materials :PC, PBT, Acryl Dimension :79 x 43 x 12 (H) mm Weight: 48 g LED
Colours: RGB Operating Voltage :5V DC RGB Channel :8CH RGB Rated Voltage: 5V DC RGB Rated Current :4A (Total) Components: Z-Sync x 1, Triple Fan Cable x 1, Mini USB (Universal Serial Bus) 5-Pin to USB (Universal Serial Bus) 2.0 Pin Header x 1


...

High performance thermal paste ZM-STC9
- Supplied in a 4g syringe with graduation
- Composed of: Alumina, Alminium, Zinc Oxide
-


...

Effectively keeps HDD cool & reduces internal heat through the front vent. Up to four fans can be mounted including one back standard-equipped fan. Supports bottom PSU installation for effective cooling of PSU & inner space of case luxurious interior with black coating finishing touch.. USB (Universal Serial Bus) 3.0 ports, audio socket, power & rest buttons set in the front for user convenience. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Efficient layout allows the installation of Micro-ATX/ Mini ITX main board & VGA/PSU/ODD, despite of its slim design. Dust filters installed on the front, side & bottom prevent dust from entering. 250mm~300mm high performance VGA card can be installed. Safe edge molding for safer installing environment. Easily install HDD & SSD at the same time. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. No need to touch the M/B for CPU cooler replacement through CPU cooler mounting holes. Cable holes also provided for neat cable management Provides spacious interior with 4 PCI extension slots. Enclosure Type ATX Mini Tower Case Dimensions 189 x 427.5 x 364mm Motherboards Micro ATX / Mini ITX Power Supply Unit Standard ATX / ATX 12V PCI/AGP Card Compatiblility up to 250~300mm Expansion Slots 4 slot Color Black Drive Bays 5.25" External Bay x 1 3.5" Internal Bay x 2 2.5" Internal Bay x 3 Cooling Components (Fans) Rear 1 x 92 (80)mm Fan (Standard) Front 1 x 120mm Fan (Optional) Side 2 x 120mm Fan (Optional) I/O Ports 1 x Microphone, 1 x Headphones, 1 x USB (Universal Serial Bus) 3.0, 1 x USB (Universal Serial Bus) 2.0 ...

Up to four fans can be mounted including one back standard-equipped fan. Supports bottom PSU installation for effective cooling of PSU & inner space of case luxurious interior with black coating finishing touch.. USB (Universal Serial Bus) 3.0 ports, audio socket, power & rest buttons set in the front for user convenience. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Efficient layout allows the installation of Micro-ATX/ Mini ITX main board & VGA/PSU/ODD, despite of its slim design. Dust filters installed on the front, side & bottom prevent dust from entering. 250mm~300mm high performance VGA card can be installed. Safe edge molding for safer installing environment. Easily install HDD & SSD at the same time. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. No need to touch the M/B for CPU cooler replacement through CPU cooler mounting holes. Cable holes also provided for neat cable management Provides spacious interior with 4 PCI extension slots. Specifications Enclosure Type ATX Mini Tower Case Dimensions 189 x 427.5 x 364mm Motherboards Micro ATX / Mini ITX Power Supply Unit Standard ATX / ATX 12V PCI/AGP Card Compatiblility up to 250~300mm Expansion Slots 4 slot Color Black Drive Bays 5.25" External Bay x 1 3.5" Internal Bay x 2 2.5" Internal Bay x 3 Cooling Components (Fans) Rear 1 x 92 (80)mm Fan (Standard) Front 1 x 120mm Fan (Optional) Side 2 x 120mm Fan (Optional) I/O Ports 1 x Microphone, 1 x Headphones, 1 x USB (Universal Serial Bus) 3.0, 1 x USB (Universal Serial Bus) 2.0 ...

The Zalman T6 mid tower computer case comes with front mesh optimised for air circulation whose hairline pattern brings out modern & stylish finish. T6s chassis is made from high strength steel sheet & is excellent in high pressure & heat environment. The black painting with powder coating applied throughout the chassis is highly corrosion resistant & practical. Behind front mesh, that also acts as air filter, T6 can accommodate two 120-millimeter fan, & beside pre-installed 120mm rear fan, cooling can be boosted even further by installing one more 120mm fan on the side panel. Externally, a 5.25-inch drive can be installed, suitable for optical drives or fan controllers. Inside, two 3.5-inch & 2.5-inch drives fit together, & two more 2.5-inch drives on the floor or behind the motherboard tray. The second 3.5-inch drive can be installed instead of the front fan. T6 provides enough space for 7 expansion slots & graphics cards with length of up to 280 mm although if graphics card is installed in the front of the HDD drive that is reduced to 260mm. The I / O panel is located on the front of the lid & features a USB (Universal Serial Bus) 3.0 port, two USB (Universal Serial Bus) 2.0 ports & the usual audio jacks. Features Unique Hairline pattern design front panel. Powder coated black finish. USB (Universal Serial Bus) 3.0 & 2.0 ports on the easy access top panel. Support for Mini ITX, m ATX & ATX motherboards. Supports a max CPU cooler height of 165mm. Support for 280mm long GPUs. ...

With the Zalman Watt Tera you can enjoy a fully modular PSU with 80 plus Gold certification. A fully modular design minimises resistance & voltage drop on the cables & lowers impendance to further enhance energy efficiecy. The PSU also features flat cables, unlike sleeved cables, flat cables make it easier to organise when building your system. Key

Features: Full Modular PSU Integrated advanced design method of Sense 6-pin to reduce voltage fluctuation to within 3% All cables are flat, easy cable management Up to 92% energy conversion efficiency Active PFC with 99.9% Maximum Power Factor Aluminium high Performance Solid Japanese Capacitor that Handles up to 221&730;F Built-in EMI Filter for Noise Reduction 12V DC-to-DC Convertor with 99.43 Availability Multiple Protection Circuit System Highly Energy-Efficient Standby Power Supply, 0.5W (Er P Lot 6 Certified) Technical Specifications Efficiency: Max 91% @ 230 VAC, Typical Load

Dimensions :160 (L) x 150 (W) x 86 (H) mm MTBF: 100, 000 Hours Weight: 3.48kg Operating Temperature: 0~40 &8451; Type: Intel ATX 12V ver.2.31 Protection: OCP/ OVP/ OPP/ OTP/ UVP/ SCP PFC Active: PFC (<0.9) Regulatory :UL, FCC, CB, CE, KC, EAC, Ro HS Input Voltage: 115- 240 VAC Input Current: 12-6A Input Frequency: 50-60 Hz Fan

Size: 135mm Cables: (Connector) Mainboard (Sense Connector 1ea) Cable X 1 EPS Cable X 2 PCI Express Cable X 8 IDE (Connector 3ea) + FDD (Connector 1ea) Cable X 1 S-ATA Cable X 3 Bearing: Two Ball Bearing 80 PLUS Gold





...

With the Zalman ZM800-EBTII you can enjoy a fully modular PSU with 80 plus Gold certification. A fully modular design minimises resistance & voltage drop on the cables & lowers impendance to further enhance energy efficiecy. The PSU also features flat cables, unlike sleeved cables, flat cables make it easier to organise when building your system. Key

Features: Full Modular PSU Integrated advanced design method of Sense 6-pin to reduce voltage fluctuation to within 3% All cables are flat, easy cable management Up to 92% energy conversion efficiency Active PFC with 99.9% Maximum Power Factor Aluminium high Performance Solid Japanese Capacitor that Handles up to 221&730;F Built-in EMI Filter for Noise Reduction 12V DC-to-DC Convertor with 99.43 Availability Multiple Protection Circuit System Highly Energy-Efficient Standby Power Supply, 0.5W (Er P Lot 6 Certified) Technical Specifications Efficiency: Max 91% @230 VAC, Typical Load Dimensions: 160 (L) x 150 (W) x 86 (H) mm MTBF :100, 000 Hours Weight :3.12kg Operating Temperature: 0~40 &8451; Type: Intel ATX 12V ver. 2.31 Protection :OCP/ OPP/ OVP/ OTP / UVP / SCP PFC: Active PFC (<0.9) Regulatory :UL, FCC, KC, CE, CB, Ro HS, EAC Input Voltage: 100-240 VAC Input Current :10-5A Input Frequency: 50-60 Hz Fan

Size: 135mm Cables (Connector): Mainboard (Sense Connector 1ea) Cable X 1 EPS Cable: X 2 PCI Express Cable: X 5 LDE (Connector 3ea) + FDD (Connector 1ea) Cable X 1 S-ATA Cable X 2 Fan Bearing: Two Ball Bearing 80 Plus Gold



...

Zalmans X3 Mid-Towwer focuses on an appealing design with digitally addressable RGB lighting. The cooling properties of the case are not compromised as numerous fans & large CPU coolers are supported. The lighting of the four included case fans can be controlled using buttons on the front panel or through a compatible motherboard. THE FEATURES OF THE ZALMAN X3 MID-TOWER AT A GLANCE: Stylish Mid-Tower in White Slightly tinted tempered glass (20 percent) Front & side panels can be removed without tools Four supplied ARGB fans Suitable for up to six case fans Including ARGB controller for up to six fans & two RGB strips Supports GPUs up to 350mm long THE ZALMAN X3 IN DETAIL: The Zalman X3 is designed for air cooling due to its compact

Dimensions, but can also be equipped with full water cooling. Three 120mm fans with digitally addressable RGB lighting are pre-installed at the factory. Another fan of the same type is located in the rear of the chassis. Two 120 or 140mm fans can be attached to the top. Alternatively, a 140mm fan can be attached to the rear chassis & two 140mm fans instead of the three 120mm fans on the front panel. This allows a total of six 120mm or five 140mm fans to be installed into the X3. The Zalman X3 can accommodate 175mm high CPU coolers. The integrated RGB controller enables the connection of up to six fans including a 3-pin RGB signal cable (5V) & the two RGB strips integrated in the cover. A dedicated button on the front panel means that you can control the lighting effects. Alternatively, the controller can be connected to the 3-pin header of a compatible mainboard in order to control the digitally addressable RGB accessories via software. ZALMAN X3: A HOME FOR POWERFUL HARDWARE COMPONENTS The white motherboard tray of the Zalman X3 can accommodate small mini-ITX, micro-ATX & regular ATX motherboards. Graphics cards can be up to 350mm long. A total of seven horizontal expansion slots are available. There is space for an ATX power supply with a maximum length of 180mm under the power supply cover. The Zalman X3 offers a factory installed drive cage for a 3.5-inch & a 3.5 / 2.5-inch drive & two 2.5-inch drive carriers that can fit on the power supply cover. THE DESIGN OF THE ZALMAN X3 The wide ventilation slot in the front of the chassis is immediately noticeable. It gives the Zalman X3 a classy-looking appearance & enables the ARGB fans behind the mesh with their luminous rings to pull air into the case with ease. The left side panel is a large side window made from tempered glass. This allows for a great view of the installed hardware & has been given a 20 percent tint. The case is completely black, with the motherboard tray & power supply cover in white setting a contrasting accent. The power supply & its connection cables are skillfully hidden by the cover. EXTENSIVE VARIETY OF CONNECTIONS The I / O panel of the Zalman X3 is equipped with two USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 ports. In addition, there are two 3.5 mm jacks, one of which functions as a headphone output & the other as a microphone input. In addition to the power & reset buttons, there is also a button for controlling the RGB lighting.

...

The Z-Sync from Zalman is a combined hub & controller that serves as a practical control center for up to eight digitally addressable RGB LED products. Thanks to conventional 3-pin connections (5VDG), it is compatible with almost all RGB LED strips or fans with the corresponding plug. The highlight of the Z-Sync is that it also works on mainboards without RGB-LED slots. To do this, it is simply connected to a free USB (Universal Serial Bus) 2.0 slot. The lighting is controlled using the Z-Sync software or even the Razer Chroma control. The features of the Z-Sync controller / hub from Zalman at a glance: RGB LED controller / hub for digitally addressable LED products Eight 3pin connectors (5VDG) Connection to a free USB (Universal Serial Bus) 2.0 port on the mainboard Control of lighting via ZSync or Razer Chroma software Easy assembly with doublesided adhesive tape The features of the Z-Sync controller / hub from Zalman in detail The Z-Sync controller / hubs from Zalman has eight channels to which digital addressable RGB LEDs can be connected. RGB LED products with a total current of 4 amps can be connected in the 3-pin connectors. In this way, even more than eight RGB LED components can be connected using a distribution cable or daisy chaining. The Z-Sync controller / hubs from Zalmancan be easily installed thanks to the double-sided adhesive strips already attached. With a height of only 12 millimeters, the Z-Sync can also be attached to the back of a mainboard tray. With its side

Dimensions of 79 x 49 millimeters, it easily fits into a free 2.5-inch SSD slot. The power supply is via SATA cable via the power supply. To connect to the mainboard, it must have a free USB (Universal Serial Bus) 2.0 header. As soon as the controller is connected, the RGBs are controlled via the Zalman-Z-Sync or Razer-Chroma software. Technical

Details: Dimensions: 79 x 49 x 12 mm (W x H x D) Connections: Input: USB (Universal Serial Bus) 2.0 (5pin / micro-USB (Universal Serial Bus), via header on the mainboard) Output: 8x 3pin RGB header (5VDG, max. 4 A) Power supply: 5 V, (via SATA from the power supply) Contents: 1x ZSync controller / hub 1x USB (Universal Serial Bus) connection Cable 1x power cable (SATA) 1x splitter (3pin / 3x 3-pin)



...

Front Mesh Cover for High Cooling Performance The front mesh bay cover provides cool air into the system while dust filters prevent dust from entering. Supports up to 7 System Fans Up to 7 system fans are installed to expel hot air effectively from the case. Zalman`s Powerful HDD Cooling Solution Interactive Cooling System: Hot air generated from HDD is expelled through both sides. Cooling Performance is maximized for HDD cooling, & the overall PC exhaust is increased. Top Air Vent Exhaust/ Tuning For for user convenience, Top air vents expel exhaustive air from the top cooling fan. In addition, translucent acryl vents are effective for tuning. Side-Panel Acryl Tuning Dynamic Side Acryl Tuning is provided for users to view the interior of gaming system. Supports 4 USB (Universal Serial Bus) 2.0 I/O module provides 4 USB (Universal Serial Bus) 2.0 ports for user convenience & expandability. Dust Filters for Front & Bottom of System & PSU Dust filters in the front & bottom mesh covers prevent dust from entering the system & keep the internal components dust-free. Additional Card Holder Provided When installing VGA Card & PCI Slot, the bracket can be used permanently. Supports Bottom PSU Installation & Aperture for Cable Management Z11 Plus supports bottom PSU installation & provides an aperture for cable management to make better use of interior space. Black Interior Coating The interior of chassis is coated black to provide a sense of unity & elegant design. Anti-Vibration Rubber Stand Anti-Vibration Rubber prevents noise & also keeps the system safe from water or other liquid. Tool Free HDD Installation with Anti-Vibration Rubber The server-type Tool-Free HDD Mount Trays allow easy HDD installation/removal & maintenance. Spacious Interior for 290mm Card Installation The interior has been designed to be spacious for easy installation & maintenance of various components. Supports Solid-State Drive (SSD) Space is provided on the back of M/B plate for installing 2.5' HDD/SSD. Use the bracket located on the 5.25 bay. Separate Apertures for Convenient CPU Cooler Installation Separate apertures for CPU cooler are provided for convenient CPU cooler installation without having to remove motherboard from case. 3-in-1 Bracket Provided 3IN1 Adapter Tray is provided for installing FDD / 3.5 HDD / 2.5' HDD/SSD. Rear Tube Apertures for Liquid Cooling Systems Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Enclosure Type
- ATX Mid Tower

Dimensions
- 260 (W) x 498 (H) x 525 (D)mm Weight
- 7.3kg Material
- Plastic, Steel Motherboard Compatibility
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V VGA Compatibility
- Full Size (up to 290mm) Expansion Slot
- 7 Drive Bays
- 5.25' External Bay x 4 3.5' External Bay x 1, Internal Bay x 5 5.25'/3.5'/2.5' 1 (3in-1) Cooling Components Front
- 1 x 120mm Blue LED Fan (120mm / 140mm) Top
- 2 x 120mm Fan (Optional) Rear
- 1 x 120mm Fan (Standard) Side
- 2 x 80mm Fan Bottom
- 120mm/140mm Fan Vent x 1 (Fan optional) I/O Ports
- Mic x 1, Headphones x 1, USB (Universal Serial Bus) 2.0 x 4 Color
- Black

















...