The 16-Port Gigabit GREENnet Switch, model TEG-S16g, provides high bandwidth performance, ease of use, & reliability, all while reducing power consumption by up to 70%*. GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement. Boost office network efficiency & eliminate network congestion with Gigabit speeds & a total switching capacity of 32 Gbps with Full-Duplex mode. A built in universal power supply reduces cable clutter & diagnostic LEDs help with network troubleshooting. Plug & Play this sturdy metal switch for reliable high-speed network connectivity. 6 x 10/100/1000 Mbps Auto-MDIX Gigabit Ethernet ports On / off power switch Features a 32 Gbps forwarding capacity Internal power supply reduces clutter GREENnet technology reduces electrical power consumption when: Ethernet port is not in use Connected device is turned off Connected device is in power-saving mode Based on Ethernet cable length IEEE 802.3x Flow Control for full-duplex mode Back pressure Flow Control for half-duplex mode Store-&-Forward switching architecture with non-blocking wire-speed performance Integrated address look-up engine with an 8K MAC address table 2 M Bits RAM data buffer Operates & maximizes packet filtering & forwarding rate Jumbo Frame support up to 9216 Bytes Rackmount hardware included Sturdy metal housing Diagnostic LEDs & Plug & Play support ...

TRENDnet’s 16-Port Gigabit GREENnet Switch, model TEG-S16D, provides performance, proven reliability, & reduced power consumption. Embedded energy saving GREENnet technology works right out of the box with no management required. This fanless unmanaged desktop switch offers a total switching capacity of 32 Gbps & 802.1p Quality of Service traffic prioritization pass-through support. 16 x Gigabit ports Quality of Service traffic prioritization pass-through support (802.1p Qo S) 32 Gbps switching fabric Jumbo Frame support Fanless design GREENnet energy saving technology ...

TRENDnet’s 16-Port Gigabit Po E+ Switch, model TPE-TG160g, offers 16 x Gigabit Po E+ ports, a 32 Gbps switching capacity, & a Po E power budget of 246 Watts. This rugged metal switch comes with a rack mount kit. ...

TRENDnet's 16-port GREENnet 10/100 Mbps Po E+ Switch, model TPE-T88g, reduces equipment & installation costs by delivering data & power over existing Ethernet cables. This unmanaged switch offers eight 10/100 Mbps Po E+ & eight Ethernet ports. The IEEE 802.3at Po E+ standard supplies up to 30 watts of power for devices such as high power wireless access points, PTZ (Pan/ Tilt/ Zoom) internet cameras, & Vo IP telephony systems. Auto sensing technology delivers 30 watts to 802.3at Po E+ devices, 15 watts to 802.3af Po E devices, & only data to non-Po E devices. GREENnet technology reduces energy costs by up to 75% when the switch is not in use. Boost office efficiency & reduce network congestion with a total switching capacity of 3.2 Gbps. LED indicators display device status for easy power management & troubleshooting. This switch is rack mountable & comes in a sturdy metal case. Use this switch with TRENDnet Po E splitters to install non-Po E devices in remote locations. ...

The 16-Port USB (Universal Serial Bus) KVM Switch lets you manage multiple computers with just one set of keyboard, monitor & mouse. This rack mount device supports USB (Universal Serial Bus) & PS/2 interface on the console side & USB (Universal Serial Bus) only on the PC side. Popular hardware platforms such as PC, Linux & Mac are supported. Users can switch between PCs using hot-key or push button for flexible management. Users can also hot-plug PCs on the fly to avoid downtime. The 16-Port USB (Universal Serial Bus) KVM Switch is the perfect choice for managing multiple PC's. Controls up to 16 computers or servers Supports both USB (Universal Serial Bus) & PS/2 Interface for console port Supports Windows, Linux, Mac & more High video quality- up to 2048 x 1536 VGA resolution Firmware upgradeable via PC port Auto-Scan & LED display for monitored PCs Keyboard status restored when switching between PCs LEDs display for easy status monitoring Beeping sound for port switching confirmation Hotkey or push button switching Plug & Play & hot-pluggable Standard 19” (1U) rack mount design 2-year limited warranty ...

The 2-Port USB (Universal Serial Bus) KVM Switch lets you manage two PCs with just one set of keyboard, monitor, & mouse. Switch between two PCs with a simple press of a button! Separate sets of KVM cables are included with the KVM Switch, so users can start controlling 2 PCs instantly. The KVM cables also provide power to the KVM Switch, eliminating the need for a power adapter. Hot Key operations provide immediate access to features such as computer switching, & auto-scanning. With its Hot-Plug, & Audible Feedback, the 2-Port USB (Universal Serial Bus) KVM Switch is the perfect choice for managing multiple PCs. Features 2-port KVM switch with VGA & USB (Universal Serial Bus) connection to computers Device monitoring with Auto-Scan & audible feedback High quality 2048x 1536 resolution for a crisp display Supports most operating systems & advance mouse designs All required cabling included Use one keyboard, monitor, & mouse to control two computers USB Keyboard/ Mouse emulation with 2-set of detachable KVM Cables Supports Microsoft Intellimouse, Optical Mouse, Logitech Net Mouse & more Supports super High Video Quality, up to 2048 x 1536 VGA resolution Supports Windows 98/98SE/ME/2000/XP/2003 Server, Linux, & Mac OS Multi-Platform support for PCs, Macintosh G3/G4, i Mac & Mac Mini Hot-Plug pluggable. Adds PC or removes the connected PCs for maintenance without powering down the KVM Switch or other PC’s Switches PC by hot-keys, push button or windows-base client switch software. Auto-Scan & LED display for easy status monitoring User definable hot-key (Windows Only) USB Interface Power method 2-year limited warranty ...

The 200 Mbps Compact Powerline AV Adapter, model TPL-306E, uses any electrical outlet to create a secure high speed building-wide network. Connect one adapter to your existing network & plug another adapter in to any outlet on your electrical system for instant high speed network access throughout your home. The compact form factor offers more space around electrical outlets for other devices. Adapters connect automatically with no installation required. For added security, TRENDnet recommends using the one-touch connect button to change the default network key. 200 Mbps building-wide networking over an existing connected electrical system Compliant with the Home Plug AV & IEEE 1901 standard 1 x 10/100 Mbps Auto-MDIX Ethernet Port Compact form factor saves space One-touch Sync button to change the default encryption key Connect one 200 Mbps** Powerline AV Adapter to the Internet & then plug in up to 5* additional Powerline AV adapters for instant building connectivity Share data intensive files, play games, download music, & more at faster data transfer rates Advanced 128-bit AES encryption to ensure total network security Power Save mode reduces electrical consumption by 80% Neighbor network support for up to 4 overlapping networks Three LED indicators: Power (on/off), Powerline Connection (green (best), amber (better), red (good), off (no connection)), Ethernet Connection (solid (connection), blinking (transfer activity), off (no connection)) Network signal transmits up to 300 meters (984 ft.) Auto Qo S support through traffic classification & multiple priority queuing Compatible with all operating systems Optional management utility compatible with Windows 7 (32/64-bit), Vista (32/64-bit), & XP (32/64-bit) operating systems Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 200 Mbps Compact Powerline AV Adapter Kit, model TPL-306E2K, uses any electrical outlet to create a secure high speed building-wide network. Connect one adapter to your existing network & plug the other adapter in to any outlet on your electrical system for instant high speed network access throughout your home. The compact form factor offers more space around electrical outlets for other devices. Adapters connect automatically with no installation required. For added security, TRENDnet recommends using the one-touch connect button to change the default network key.

Includes:: two TPL-306E adapters Compliant with the Home Plug AV & IEEE 1901 standard 200 Mbps building-wide networking over an existing electrical system 1 x 10/100 Mbps Auto-MDIX Ethernet port Compact form factor saves space One-touch Sync button to change the default encryption key Three LED indicators: Power (on/off), Powerline Connection (green (best), amber (better), red (good), off (no connection)), Ethernet Connection (solid (connection), blinking (transfer activity), off (no connection)) Share data intensive files, play games, download music & more at faster data transfer rates Advanced 128-bit AES encryption to ensure total network security Power Saving mode reduces electrical consumption by 80% Neighbor network support for up to 4 overlapping networks Network signal transmits up to 300 meters (984ft.) Auto Qo S support through traffic classification & multiple priority queuing Compatible with all operating systems Optional management utility compatible with Windows 7 (32/64-bit), Vista (32/64-bit), & XP (32/64-bit) operating systems

...

The Powerline 200 AV Nano Adapter Kit, model TPL-308E2K, uses an electrical outlet to create a secure high speed network. Connect the first adapter to your network & plug the second adapter into an outlet on your electrical system for instant high speed network access. The compact form factor saves space around crowded electrical outlets. This adapter automatically connects to other TRENDnet Powerline AV adapters with no installation required—TRENDnet recommends pressing the ‘ Sync’ button to automatically change default encryption keys. Use up to 4 adapters to network devices in different rooms without running new cabling. Power Save mode reduces power consumption by up to 70%. Quality of Service technology prioritizes video, audio, & online gaming. LED displays convey device status for easy troubleshooting. Advanced 128-bit AES encryption secures your network. This adapter is ideal to be used in buildings that interfere with wireless networking signals.

Includes:: two TPL-308E adapters 200 Mbps networking over an existing electrical system Compliant with IEEE1901 & Home Plug AV standards 1 x 10/100 Mbps Auto-MDIX Ethernet port Compact form factor saves space Adapters automatically connect using an encrypted Powerline signal One-touch Sync button changes encryption keys

...

The 24-port Gigabit GREENnet Switch TEG-S24g provides high bandwidth performance, ease of use & reliability, all while reducing power consumption by up to 70%.GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement. Boost office network efficiency & eliminate network congestion with Gigabit speeds & a total switching capacity of 48 Gbps with full-duplex mode. A built in universal power supply reduces cable clutter & diagnostic LEDs help with network troubleshooting. Plug & Play this sturdy metal switch for reliable high-speed network connectivity. ...