TRENDnet’s TI-PG541 is a reliable IP30 unmanaged Po E+ DIN-rail switch with hardened components rated for extreme industrial environments. It offers four Gigabit Po E+ ports (Ports 1-4, 802.3at), one Gigabit port, one SFP slot, & a full Po E power budget of 120 Watts. Dual redundant power inputs (power adapter sold separately) with overload current protection support zero downtime requirements. An alarm output can be triggered by a primary and/or redundant power failure. Full Po E+ Power Budget Supplies up to 30 Watts of Po E/ Po E+ power per port (ports 1-4 802.3at/802.3af) with a 120 Watt Po E power budget Network Ports 5 x Gigabit Ethernet ports (port 1-4 Po E/ Po E+) & 1 x SFP slot Integrated DIN-Rail Mount IP30 rated metal enclosure with integrated DIN-rail mounting hardware Switching Capacity 12 Gbps switching capacity Redundant Power Dual redundant power inputs with overload current protection (power adapter sold separately: model 48VDC3000) Alarm Output Alarm output triggered by power failure of primary and/or redundant power (defined by DIP switch) Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10 KB), for increased performance Extreme Temperatures Hardened switch is rated for an operating temperature range of -20 to 60 degrees C (-4 to 140 degrees F) Electro Magnetic Compliance Complies with IEC61000-6-2 EMC generic standard immunity for industrial environments Shock & Vibration Resistant Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), & vibration (IEC 60068-2-6) LED Indicators LED indicators convey power, redundant power, alarm, SFP, & network port status Grounding Point Grounding point protects equipment from external electrical surges Features 4 x Gigabit Po E+ (802.3at) ports, 1 x Gigabit port, & 1 x Gigabit SFP slot 120 W full Po E+ power budget 12 Gbps switching capacity Hardened IP30 rated metal switch with integrated DIN-Rail mount -20 to 60 degrees C (-4 to 140 degrees F) operating temperature range Dual redundant power inputs with overload current protection Alarm output triggered by power failure Power adapter sold separately Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 2-port DVI USB (Universal Serial Bus) KVM switch kit with audio, model TK-214I, means that you can control 2 PC and/or Mac computers with one set of console controls. Manage laptops or desktops that have DVI, USB (Universal Serial Bus), & audio ports at the touch of a button with one set of USB (Universal Serial Bus) keyboard, USB (Universal Serial Bus) mouse, DVI monitor, microphone, & speakers. No driver installation required, simply plug in the devices to control 2 computers. A convenient toggle switch with a 1.5 m extension cable can be placed in the most ergonomic location on your workstation. View crystal clear Digital Video Interface (DVI) resolution at up to 1920 x 1200 pixels. Built in 0.9 m combination cables include all the necessary USB (Universal Serial Bus), DVI, & audio connectors for each respective computer. ...

- Device Type: KVM / audio / USB (Universal Serial Bus) switch
- 2 ports
- Enclosure Type: Desktop
- Subtype: KVM
-



...

- Device Type: KVM / audio / USB (Universal Serial Bus) switch
- 4 ports
- Enclosure Type: Desktop
- Subtype: KVM
-



...

The 2- Port USB (Universal Serial Bus) Audio KVM Switch lets you control multimedia PCs with just one keyboard, monitor, mouse, microphone, & a set of speakers. The KVM switch not only means that you can share your monitor, keyboard & mouse but you can also share microphone & speakers. With just a simple press of a button, this KVM switch eliminates the hassle of cable swapping & switching between 2 PCs. ...

TRENDnet’s CAT5 PS/2 Server Interface Module, model TK-CAT5P, connects a TRENDnet CAT5 KVM switch to a computer with an available PS/2 & VGA port. One TK-CAT5P is required per computer. CAT5, 5E & 6 cable connections are supported. Features Computers Connects a TRENDnet CAT5 KVM switch to a computer Cable Support Supports CAT5, 5E, & 6 cable connections PS/2 Requires an available PS/2 port on the connected computer VGA Requires an available VGA port on the connected computer HD Resolution Supports resolution up to 1600 x 1200 pixels OS Support Supports Windows, Linux, & Sun operating systems ...

The 24-Port Gigabit Layer 2 Switch with 4 Shared Mini-GBIC Slots, model TL2-G244, provides a reliable foundation for a highly scalable managed network. The TL2-G244 features a 48 Gbps switch fabric, 802.1X authentication, SNMP v 3, & Multiple Spanning Tree (MSTP) support. Gigabit Ethernet ports & Mini-GBIC slots provide high speed uplinks to backbone switching or servers. Configure the switch using your choice of Telnet, Hyper Terminal, SNMP, or a Browser. View statistics captured for 17 unique switching parameters. Additional management features such as Port Trunking, IGMP snooping, Static & Dynamic VLAN, Load Balancing, RMON, Qo S, & RSTP allow administrators to effectively manage departmental work groups. Features 24 x 10/100/1000 Mbps Auto -MDIX Gigabit ports 4 x shared SFP (Mini-GBIC) slots 1 x RS-232 console port 8K MAC address entries 4 Mbit data RAM Buffer 802.1Q Tagged VLAN, Dynamic VLAN Learning GVRP, & Asymmetric VLAN (Up to 256 VLAN Groups) Spanning Tree Protocols: 802.1d STP, 802.1w RSTP, & 802.1s MSTP Quality of Service (Qo S): Port-based Qo S & bandwidth rate control, IEEE 802.1p, & DSCP 802.1X Port-Based Access Control & RADIUS Authentication IGMP snooping v 1, v 2 (Up to 64 entries) Link Aggregation & Port Trunking: Static & 802.3ad Dynamic LACP Store-&-Forward switching method 802.3x Flow Control for full duplex & backpressure for half duplex operation Broadcast, Multicast, & DLF (Destination Lookup Failure) Storm Filtering protection Supports port status control (enable/disable, auto-negotiation, speed, duplex, & flow-control) Port Mirroring for network traffic analysis Syslog support for external device logging Switch management with: SNMP v 1, v 2c, v 3 Telnet SSH Console (RS-232) HTTP/HTTPS web browser RMON (4 groups) Front panel diagnostic LED indicators 19” (1U) Rack mount design with mounting hardware included 3-year limited warranty Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com ...

TRENDnet’s 10-Port Gigabit Web Smart Po E+ Switch, model TPE-1020WS, delivers a 20 Gbps switching capacity with eight Po E+ Gigabit ports & two Gigabit Ethernet uplink ports shared with two SFP slots. This IPv 6 ready switch offers advanced traffic management, troubleshooting, security, energy saving GREENnet, & monitoring features at a reduced cost. Hardware Design Fanless rack mountable housing features eight Gigabit Po E+ ports (automatically supplies Po E+ (30 Watts) & Po E (15 Watts)) & two Gigabit Ethernet uplink ports shared with two SFP slots IPv 6 Ready This switch supports IPv 6 configuration & neighbor IPv 6 network support Traffic Management A broad range of network configurations are support by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (Co S), & Qo S queue scheduling Troubleshooting Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aides in rapid troubleshooting Security Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, & RADIUS are compatible with layered security controls Monitoring RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions Energy Savings Up to 70% energy saving GREENnet technology Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TRENDnet’s Gigabit Po E Splitter, model TPE-104GS, networks a non-Po E device in a remote location using a Po E network connection. The TPE-104GS splits a Gigabit Po E connection into separate power & Gigabit data sources. A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements. The included 2 & 2.5 mm jumper cables increase power pin device compatibility. Performance Po E Compatible with Po E (802.3af ) network connections Gigabit Ethernet Supports Gigabit network speeds Adjustable Dip Switch A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements Jumper Cables The included 2 & 2.5 mm jumper cables increase power pin device compatibility with the non-Po E networked device No Power Adapter The TPE-104GS is powered by the Po E connection Mounting Built-in mounting points increase installation flexibility Hardware Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af Device Interface 1 x Gigabit data/power in port 1 x Gigabit data out port 1 x Power out port LED indicators Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) Data Transfer Rate Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Jumper Cable 2.0 to 2.0 mm 2.0 to 2.5 mm Power Po E network cable input: 48 V DC, 0.38 A Output: 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A) Consumption: 0.3 Watts (max.) Operating Temperature 0 – 45 °C (32
- 113 °F) Operating Humidity Max. 90% non-condensing

Dimensions 70 x 45 x 25 mm (2.8 x 1.8 x 1 in.) Weight 60 g (2.1 oz.) Certifications CE


...

The Po E+ Injector, model TPE-105I, combines electrical power with a network connection to produce a Power over Ethernet Plus (Po E+) signal. Connect this device to a non-Po E switch & then run an Ethernet cable for up to 100 meters (328 ft.) to network Po E+ or Po E devices. The integrated power supply reduces installation clutter. Auto sensing technology delivers 30 Watts to 802.3at Po E+ devices or 15 Watts to 802.3af Po E devices. No need to buy a Po E switch—use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. IEEE 802.3at Po E+ (30 Watts) compliant Backwards compatible with IEEE 802.3af Po E (15 Watt) devices Automatically supplies a Po E+ (30 Watts) or Po E (15 Watts) connection to the device Integrated power supply Network devices for distances of up to 100 meters (328 ft.) 1 x 10/100 Mbps Auto-MDIX Data In port 1 x 10/100 Mbps Po E+ Auto-MDIX Data Out port Power port with LED indicator Easily install a Po E+ or POE device where a power outlet is not available Reduce installation & network equipment costs 3-year limited warranty ...