The 2-port DVI USB (Universal Serial Bus) KVM switch kit with audio, model TK-214I, means that you can control 2 PC and/or Mac computers with one set of console controls. Manage laptops or desktops that have DVI, USB (Universal Serial Bus), & audio ports at the touch of a button with one set of USB (Universal Serial Bus) keyboard, USB (Universal Serial Bus) mouse, DVI monitor, microphone, & speakers. No driver installation required, simply plug in the devices to control 2 computers. A convenient toggle switch with a 1.5 m extension cable can be placed in the most ergonomic location on your workstation. View crystal clear Digital Video Interface (DVI) resolution at up to 1920 x 1200 pixels. Built in 0.9 m combination cables include all the necessary USB (Universal Serial Bus), DVI, & audio connectors for each respective computer. ...

- Device Type: KVM / audio / USB (Universal Serial Bus) switch
- 2 ports
- Enclosure Type: Desktop
- Subtype: KVM
-



...

- Device Type: KVM / audio / USB (Universal Serial Bus) switch
- 4 ports
- Enclosure Type: Desktop
- Subtype: KVM
-



...

The 2- Port USB (Universal Serial Bus) Audio KVM Switch lets you control multimedia PCs with just one keyboard, monitor, mouse, microphone, & a set of speakers. The KVM switch not only means that you can share your monitor, keyboard & mouse but you can also share microphone & speakers. With just a simple press of a button, this KVM switch eliminates the hassle of cable swapping & switching between 2 PCs. ...

TRENDnet’s 2-Port HDMI KVM Switch, model TK-215i, controls two computers (with an available HDMI port) with one set of console controls. No driver installation required, simply plug in the integrated cables to share two computers with a full HD 1080p display. The TK-215i supports HDMI & 3.5 mm analog audio & features an ergonomic computer toggle switch. Features Ergonomic computer toggle switch No CD installation USB (Universal Serial Bus) Powered
- No external power adapter Computers Control up to 2 computers 1080p HD Supports full HD 1080p (progressive 1920 x 1080 pixels) with a 60 Hz refresh rate 2-Way Audio Full audio support through HDMI cable connections with optional 3.5 mm microphone & speaker jacks Toggle Switch Use the integrated 1.5 m (5 ft.) cable to position the toggle switch in the most ergonomic location Console Connectors Emulation Technology supports advanced USB (Universal Serial Bus) keyboard & mouse designs HDMI Display HDMI 1.3 with HDCP support Computer Ports Requires free USB (Universal Serial Bus) & HDMI ports from connected computer Integrated Cables All required cables are integrated Switch Software Windows & Mac based KVM switch software to define hot keys & create auto-scan intervals
...

The 24-Port Gigabit Layer 2 Switch with 4 Shared Mini-GBIC Slots, model TL2-G244, provides a reliable foundation for a highly scalable managed network. The TL2-G244 features a 48 Gbps switch fabric, 802.1X authentication, SNMP v 3, & Multiple Spanning Tree (MSTP) support. Gigabit Ethernet ports & Mini-GBIC slots provide high speed uplinks to backbone switching or servers. Configure the switch using your choice of Telnet, Hyper Terminal, SNMP, or a Browser. View statistics captured for 17 unique switching parameters. Additional management features such as Port Trunking, IGMP snooping, Static & Dynamic VLAN, Load Balancing, RMON, Qo S, & RSTP allow administrators to effectively manage departmental work groups. Features 24 x 10/100/1000 Mbps Auto -MDIX Gigabit ports 4 x shared SFP (Mini-GBIC) slots 1 x RS-232 console port 8K MAC address entries 4 Mbit data RAM Buffer 802.1Q Tagged VLAN, Dynamic VLAN Learning GVRP, & Asymmetric VLAN (Up to 256 VLAN Groups) Spanning Tree Protocols: 802.1d STP, 802.1w RSTP, & 802.1s MSTP Quality of Service (Qo S): Port-based Qo S & bandwidth rate control, IEEE 802.1p, & DSCP 802.1X Port-Based Access Control & RADIUS Authentication IGMP snooping v 1, v 2 (Up to 64 entries) Link Aggregation & Port Trunking: Static & 802.3ad Dynamic LACP Store-&-Forward switching method 802.3x Flow Control for full duplex & backpressure for half duplex operation Broadcast, Multicast, & DLF (Destination Lookup Failure) Storm Filtering protection Supports port status control (enable/disable, auto-negotiation, speed, duplex, & flow-control) Port Mirroring for network traffic analysis Syslog support for external device logging Switch management with: SNMP v 1, v 2c, v 3 Telnet SSH Console (RS-232) HTTP/HTTPS web browser RMON (4 groups) Front panel diagnostic LED indicators 19” (1U) Rack mount design with mounting hardware included 3-year limited warranty Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com ...

TRENDnet’s 10-Port Gigabit Web Smart Po E+ Switch, model TPE-1020WS, delivers a 20 Gbps switching capacity with eight Po E+ Gigabit ports & two Gigabit Ethernet uplink ports shared with two SFP slots. This IPv 6 ready switch offers advanced traffic management, troubleshooting, security, energy saving GREENnet, & monitoring features at a reduced cost. Hardware Design Fanless rack mountable housing features eight Gigabit Po E+ ports (automatically supplies Po E+ (30 Watts) & Po E (15 Watts)) & two Gigabit Ethernet uplink ports shared with two SFP slots IPv 6 Ready This switch supports IPv 6 configuration & neighbor IPv 6 network support Traffic Management A broad range of network configurations are support by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (Co S), & Qo S queue scheduling Troubleshooting Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aides in rapid troubleshooting Security Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, & RADIUS are compatible with layered security controls Monitoring RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions Energy Savings Up to 70% energy saving GREENnet technology Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TRENDnet’s Gigabit Po E Splitter, model TPE-104GS, networks a non-Po E device in a remote location using a Po E network connection. The TPE-104GS splits a Gigabit Po E connection into separate power & Gigabit data sources. A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements. The included 2 & 2.5 mm jumper cables increase power pin device compatibility. Performance Po E Compatible with Po E (802.3af ) network connections Gigabit Ethernet Supports Gigabit network speeds Adjustable Dip Switch A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements Jumper Cables The included 2 & 2.5 mm jumper cables increase power pin device compatibility with the non-Po E networked device No Power Adapter The TPE-104GS is powered by the Po E connection Mounting Built-in mounting points increase installation flexibility Hardware Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af Device Interface 1 x Gigabit data/power in port 1 x Gigabit data out port 1 x Power out port LED indicators Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) Data Transfer Rate Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Jumper Cable 2.0 to 2.0 mm 2.0 to 2.5 mm Power Po E network cable input: 48 V DC, 0.38 A Output: 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A) Consumption: 0.3 Watts (max.) Operating Temperature 0 – 45 °C (32
- 113 °F) Operating Humidity Max. 90% non-condensing

Dimensions 70 x 45 x 25 mm (2.8 x 1.8 x 1 in.) Weight 60 g (2.1 oz.) Certifications CE


...

The Po E+ Injector, model TPE-105I, combines electrical power with a network connection to produce a Power over Ethernet Plus (Po E+) signal. Connect this device to a non-Po E switch & then run an Ethernet cable for up to 100 meters (328 ft.) to network Po E+ or Po E devices. The integrated power supply reduces installation clutter. Auto sensing technology delivers 30 Watts to 802.3at Po E+ devices or 15 Watts to 802.3af Po E devices. No need to buy a Po E switch—use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. IEEE 802.3at Po E+ (30 Watts) compliant Backwards compatible with IEEE 802.3af Po E (15 Watt) devices Automatically supplies a Po E+ (30 Watts) or Po E (15 Watts) connection to the device Integrated power supply Network devices for distances of up to 100 meters (328 ft.) 1 x 10/100 Mbps Auto-MDIX Data In port 1 x 10/100 Mbps Po E+ Auto-MDIX Data Out port Power port with LED indicator Easily install a Po E+ or POE device where a power outlet is not available Reduce installation & network equipment costs 3-year limited warranty ...

The Gigabit Power over Ethernet injector, model TPE-113GI, combines electrical power with a gigabit network connection to produce a Gigabit Power over Ethernet (Po E) signal. Connect this device to a non-Po E switch & then run an Ethernet cable for up to 100 meters to network Po E devices. No need to buy a Po E switch
- use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated Po E & non-Po E network at gigabit speeds
...