The compact 16-Port 10/100 Mbps GREENnet Switch provides enhanced bandwidth performance, ease of use & reliability, all while reducing power consumption by up to 40%. GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management required. Boost your office efficiency & reduce network congestion with a total switching capacity of 3.2 Gbps with Full-Duplex Mode. Plug & Play this sturdy metal switch for reliable high-speed network connectivity. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 16-Port 10/100 Mbps Po E Switch, model TPE-S160, reduces equipment & installation costs by delivering data & power over existing Ethernet cables to Power over Ethernet (Po E) enabled devices such as Access Points & IP Cameras. Boost office efficiency & reduce network congestion with a total switching capacity of 3.2 Gbps. LED indicators display device status for easy power management & troubleshooting. An internal power supply reduces clutter & delivers 15.4 Watts to each Po E port. A convenient on/off button is located on the back of the switch. Non-Po E devices can connect to the switch—auto-sensing Po E technology cuts power to non-Po E connected devices. Use TRENDnets Po E Splitter to install non-Po E devices in remote locations. Reduces equipment cost by delivering data & power over existing network cables 16 x 10/100 Mbps Full Duplex Po E ports 3.2 Gbps switching capacity Use with TRENDnets Po E Splitter to network & power non-Po E devices Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Prepare yourself for Copper Gigabit Ethernet with TRENDnets CAT 5e RJ-45 UTP Patch Panels. These patch panels are certified 100 Mhz CAT 5e, which are necessary for Copper Gigabit Ethernet. TRENDnets 16-port 100 Mhz enhanced CAT 5 Patch Panels are ideal for Ethernet/ Fast Ethernet/ Gigabit Ethernet (1000 Base-T) network applications. Using TRENDnets CAT 5e now, will prepare you for more bandwidth in the future without re-cabling your network. CAT 5e grade Krone connectors with color-coded labeling for T568A & 568B wiring schemes. 1000 Base-T Gigabit Copper Ethernet ready. Backward compatible with CAT 3, 4 & 5 cabling. Meets EIA/TIA 568A & ISO/IEC 11801. ...

The 16-Port Gigabit GREENnet Switch, model TEG-S16 Dg, provides high bandwidth performance, ease of use, & reliability, all while reducing power consumption by up to 70%.GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement. Boost office network efficiency & eliminate network congestion with Gigabit speeds & a total switching capacity of 32 Gbps with full-duplex mode. A built in universal power supply reduces cable clutter & diagnostic LEDs help with network troubleshooting. Plug & Play this sturdy metal switch for reliable high-speed network connectivity. ...

The 16-Port Gigabit GREENnet Switch, model TEG-S16g, provides high bandwidth performance, ease of use, & reliability, all while reducing power consumption by up to 70%*. GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement. Boost office network efficiency & eliminate network congestion with Gigabit speeds & a total switching capacity of 32 Gbps with Full-Duplex mode. A built in universal power supply reduces cable clutter & diagnostic LEDs help with network troubleshooting. Plug & Play this sturdy metal switch for reliable high-speed network connectivity. 6 x 10/100/1000 Mbps Auto-MDIX Gigabit Ethernet ports On / off power switch Features a 32 Gbps forwarding capacity Internal power supply reduces clutter GREENnet technology reduces electrical power consumption when: Ethernet port is not in use Connected device is turned off Connected device is in power-saving mode Based on Ethernet cable length IEEE 802.3x Flow Control for full-duplex mode Back pressure Flow Control for half-duplex mode Store-&-Forward switching architecture with non-blocking wire-speed performance Integrated address look-up engine with an 8K MAC address table 2 M Bits RAM data buffer Operates & maximizes packet filtering & forwarding rate Jumbo Frame support up to 9216 Bytes Rackmount hardware included Sturdy metal housing Diagnostic LEDs & Plug & Play support ...

TRENDnet’s 16-Port Gigabit Po E+ Switch, model TPE-TG160g, offers 16 x Gigabit Po E+ ports, a 32 Gbps switching capacity, & a Po E power budget of 246 Watts. This rugged metal switch comes with a rack mount kit. ...

TRENDnet's 16-port GREENnet 10/100 Mbps Po E+ Switch, model TPE-T88g, reduces equipment & installation costs by delivering data & power over existing Ethernet cables. This unmanaged switch offers eight 10/100 Mbps Po E+ & eight Ethernet ports. The IEEE 802.3at Po E+ standard supplies up to 30 watts of power for devices such as high power wireless access points, PTZ (Pan/ Tilt/ Zoom) internet cameras, & Vo IP telephony systems. Auto sensing technology delivers 30 watts to 802.3at Po E+ devices, 15 watts to 802.3af Po E devices, & only data to non-Po E devices. GREENnet technology reduces energy costs by up to 75% when the switch is not in use. Boost office efficiency & reduce network congestion with a total switching capacity of 3.2 Gbps. LED indicators display device status for easy power management & troubleshooting. This switch is rack mountable & comes in a sturdy metal case. Use this switch with TRENDnet Po E splitters to install non-Po E devices in remote locations. ...

The 16-Port USB (Universal Serial Bus) KVM Switch lets you manage multiple computers with just one set of keyboard, monitor & mouse. This rack mount device supports USB (Universal Serial Bus) & PS/2 interface on the console side & USB (Universal Serial Bus) only on the PC side. Popular hardware platforms such as PC, Linux & Mac are supported. Users can switch between PCs using hot-key or push button for flexible management. Users can also hot-plug PCs on the fly to avoid downtime. The 16-Port USB (Universal Serial Bus) KVM Switch is the perfect choice for managing multiple PC's. Controls up to 16 computers or servers Supports both USB (Universal Serial Bus) & PS/2 Interface for console port Supports Windows, Linux, Mac & more High video quality- up to 2048 x 1536 VGA resolution Firmware upgradeable via PC port Auto-Scan & LED display for monitored PCs Keyboard status restored when switching between PCs LEDs display for easy status monitoring Beeping sound for port switching confirmation Hotkey or push button switching Plug & Play & hot-pluggable Standard 19” (1U) rack mount design 2-year limited warranty ...

The 2-Port PS/2 KVM Switch Kit lets you manage two PC’s with just one set of keyboard, monitor, & mouse. Switch between two PC’s with a simple press of a button! The KVM switch

Includes:: two separate sets KVM cables & also

Includes:: great features such as Auto-Scan, Hot-Key operations, & audio feedback.



...

The 2-Port USB (Universal Serial Bus) KVM Switch lets you manage two PCs with just one set of keyboard, monitor, & mouse. Switch between two PCs with a simple press of a button! Separate sets of KVM cables are included with the KVM Switch, so users can start controlling 2 PCs instantly. The KVM cables also provide power to the KVM Switch, eliminating the need for a power adapter. Hot Key operations provide immediate access to features such as computer switching, & auto-scanning. With its Hot-Plug, & Audible Feedback, the 2-Port USB (Universal Serial Bus) KVM Switch is the perfect choice for managing multiple PCs. Features 2-port KVM switch with VGA & USB (Universal Serial Bus) connection to computers Device monitoring with Auto-Scan & audible feedback High quality 2048x 1536 resolution for a crisp display Supports most operating systems & advance mouse designs All required cabling included Use one keyboard, monitor, & mouse to control two computers USB Keyboard/ Mouse emulation with 2-set of detachable KVM Cables Supports Microsoft Intellimouse, Optical Mouse, Logitech Net Mouse & more Supports super High Video Quality, up to 2048 x 1536 VGA resolution Supports Windows 98/98SE/ME/2000/XP/2003 Server, Linux, & Mac OS Multi-Platform support for PCs, Macintosh G3/G4, i Mac & Mac Mini Hot-Plug pluggable. Adds PC or removes the connected PCs for maintenance without powering down the KVM Switch or other PC’s Switches PC by hot-keys, push button or windows-base client switch software. Auto-Scan & LED display for easy status monitoring User definable hot-key (Windows Only) USB Interface Power method 2-year limited warranty ...