About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Trend Snap/cs/8tc Snappy Tc D/csk 7/64 Dr Snappy
Trend Snap/cs/8tc
Snappy Tc D/csk 7/64
Dr Snappy
£13.00
Tungsten Carbide tipped version of the popular Snappy drill countersink with adjustable HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only. D=3/8 inch. D=9.5 mm. D2=7/64 inch. D2=2.75 mm. Shank Diameter=1/4 inch hex Screw size S/W= No. 8 H/W= No. 6. ...
Available
Trend Snap/dbg/7 Centring Guide 7/64in Drill
Trend Snap/dbg/7
Centring Guide 7/64in
Drill
£11.00
These spring loaded drill bit guides are self centring & are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment, they can be easily dismantled for cleaning & are supplied with a HSS Drill Bit. Drill

Size: 2.75 mm. (7/64 in.). Screw

Size: No. 8.



...
Available
Trend Snap/hklc/6 Snap/hklc/6 Key Chuck
Trend Snap/hklc/6
Snap/hklc/6 Key Chuck
£16.49
Trends SNAPHKLC6 keyless chuck can be used in quick chucks & impact drivers to hold parallel shank drills bits up to 1/4 inch. This chuck has a clamping capacity 0.8 mm. (1/32 inch) to 6 mm. (1/4 inch). It has new enhanced gripping power when compared to traditional key type drill chucks for added strength & durability. The Trend chuck is lightweight, with plastic a body, & fitted with Snappy shank 1/4 inch hex shank adaptor. Keyless chuck. Enhanced gripping power. Lightweight. Plastic body. Fitted with Snappy shank 1/4-Inch hex shank adaptor. Box Contents: 1 x Snappy SNAPHKLC6 key chuck. ...
Available
Trend Snap/th2/set Snappy Set 60pc
Trend Snap/th 2/set
Snappy Set 60pc
£94.00
Heavy-duty fabric tool holder available with assorted Snappy tools. Standard Quick Chuck Masonry bits 567 and 8 mm. Drill bit guide No. 6 No 8. Drills 123456 and 7 mm. Auger bits 10 and 13 mm. Flat bits 16 19 22 25 and 30 mm. Drill countersinks 2.5 3.25 and 3.5 mm. Deburrer/countersink Hole enlarger. Square drive adapter 1/43/8 & 1/2 in. Screwdriver bit Pozi No. 123. Magnetic drivers 6 8 10 and 12 mm. A/F Snappy Pencil Insert bits. Magnetic bit holder (including 5 slotted 3 Pozi 3 Phillips 6 hex and 6 Torx). ...
Available
image missing
Trend T421/35 X 1/4
Tungsten Carbide
Tipcut H/s
£23.00
Specifically manufactured for the kitchen furniture trade for recessing circular hinges. Type 421 has two wings no scribers & centre point while the T421 also has two wings no scribers & no centre point & is best suited for thinner laminate covered boards. These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This hinge sinker is best suited for thinner laminate covered boards. Use with pillar drills only. ...
Archived Product
Trend T4elk Router 115v
Trend T4elk Router
115v
£109.00
The Trend T4EK light-duty plunge router is suitable for the hobbyist & light trade user.

Features: Variable

...
Available
Trend T5eb Router
Trend T5eb Router
£224.99
Electronic variable control of spindle speed under load for a fine finish on all types of material. Soft start feature eliminates sudden movement of machine on start up. Spindle lock & hex collet nut allows easy cutter changes. Precision machined one piece multi slit collet with combined nut. Compact design & low weight make it easy to use especially for intricate work. Adjustable twin rod side fence for guiding along a straight edge. Rating= Professional / Trade Plunge stroke=0 50mm Power input=850w Power ampage=3. 8amp Standard model collet dia. =1 / 4 & 8mm Cutter dia. max. =40mm No load speeds=9 27000 rpm Dust spout size=35mm Guide bush dia. =20mm Weight=3. 0kg Voltages=240v Sound pressure Lpa=81. 0 d B (A)1 Acoustic pressure Lwa=94. 01 d B (A)2 Hand arm vibration= ...
Archived Product
Trend Temp/bh/a Butt Hinge Template
Trend Temp/bh/a Butt
Hinge Template
£41.50
A routing template that allows a router to create a hinge recess on a door. Made from clear 8 mm. thick plastic.

Includes::

...
Available
Trend Temp/luc/57 Letter Template
Trend Temp/luc/57
Letter Template
£51.50
Hand operated winches ideal for moving & pulling loads & have many uses in DIY leisure & light commercial applications. These winches offer two working loads of 450 kg. or 900 kg. & are perfect for general recovery & loading work such as Cars Boats Lawn Equipment & pulling loads onto trailers or up steep drive-ways. The winches feature hardened steel gears with a smooth action single speed ratcheting crank locking mechanism supported on a heavy plate chassis coated for corrosion resistance. Fitted with a drop forged steel hook with safety pawl & a long 24 cm. handle for easy operation. Note: Do not exceed 180% grade when puling any Weight: load. This product is not designed for lifting. FAIAUWIN900 specifications: Maximum load: 900 kg. Cable length: 10 m. x 5.1. Maximum traction capacity: 2000da N. ...
Available
Trend Temp/otb/a Offset Trenching Base
Trend Temp/otb/a
Offset Trenching Base
£29.50
Ideal for housing cuts where oversize or undersize board is used. Allows wider grooves to be routed by simply rotating the base. Made from clear plastic. Pre-drilled for Trend, Elu & De Walt routers. Can be re-drilled by user to suit other makes of router. The distance from the centre hole to the shortest edge is 100 mm., subsequent edge distances are 101 mm., 102 mm., 103 mm., 104 mm. & 105 mm. Size=200 x 200 x 8 mm. with 1.0 mm. offset. ...
Archived Product

Trend T46/01 X 1/2 Tungsten Carbide Guided Trimmer

Self guiding cutters with bearings mounted for trimming and bevelling timber lippings and plastic laminate edges for cabinet making countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work bearings are normally fractionally larger than cutter diameter to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2 in Shank. Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90 D = 12.7 mm. C = 25 mm.
RIP - This product is no longer available on our network. It was last seen on 04.03.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Ebuyer
  • SKU: 467531
Availability: In Stock
£19.00
computers DEFAULT
Description Reviews / Comments Add New

Product Description

Self guiding cutters with bearings mounted for trimming & bevelling timber lippings & plastic laminate edges for cabinet making countertop production or any shaping applications. Bearing guided cutters are suitable for both straight & curved work bearings are normally fractionally larger than cutter diameter to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling
- use the bearing to follow a template or base edge of board. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2 in Shank. Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90 D = 12.7 mm. C = 25 mm.

Reviews/Comments

Add New

Intelligent Comparison

Archived Product
image missing
Trend 46/94 X 1/2 Tungsten Carbide Guided Profiler Ebuyer
£40.00
Archived Product
Trend 46/390 X 1/2 Tungsten Carbide Guided Rebater
Trend 46/390 X 1/2 Tungsten Carbide Guided Rebater Ebuyer
£62.00
Archived Product
Trend 46/80 X 1/4 Tungsten Carbide 3 Flute Trimmer
Trend 46/80 X 1/4 Tungsten Carbide 3 Flute Trimmer Ebuyer
£21.50
Archived Product
image missing
Trend 46/92 X 1/4 Tungsten Carbide Guided Profiler Ebuyer
£26.99
Archived Product
Trend 4/30 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/30 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer
£37.00
Archived Product
Trend 4/80 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/80 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer
£38.00
Archived Product
image missing
Trend 46/39 X 1/2 Tungsten Carbide Rebate Set Ebuyer
£56.50
Archived Product
Trend 4/24 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/24 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer
£38.00

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
Plastic - A generic term for a synthetic product used in the manufacture of products
Dry - A term used to describe an item with has little or no water present
Dry - A term used in wine making to describe the lack of sugar (sweetness)
edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
Bearings - A direction or a way someone moves around.

Supplier Information

Ebuyer
Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.
Page Updated: 2024-03-04 12:41:25

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu