More From Contributor

These spring loaded drill bit guides are self centring & are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment, they can be easily dismantled for cleaning & are supplied with a HSS Drill Bit. Drill

Size: 2.75 mm. (7/64 in.). Screw

Size: No. 8.

...

Available

Trends SNAPHKLC6 keyless chuck can be used in quick chucks & impact drivers to hold parallel shank drills bits up to 1/4 inch. This chuck has a clamping capacity 0.8 mm. (1/32 inch) to 6 mm. (1/4 inch). It has new enhanced gripping power when compared to traditional key type drill chucks for added strength & durability. The Trend chuck is lightweight, with plastic a body, & fitted with Snappy shank 1/4 inch hex shank adaptor. Keyless chuck. Enhanced gripping power. Lightweight. Plastic body. Fitted with Snappy shank 1/4-Inch hex shank adaptor. Box Contents: 1 x Snappy SNAPHKLC6 key chuck. ...

Available

Heavy-duty fabric tool holder available with assorted Snappy tools. Standard Quick Chuck Masonry bits 567 and 8 mm. Drill bit guide No. 6 No 8. Drills 123456 and 7 mm. Auger bits 10 and 13 mm. Flat bits 16 19 22 25 and 30 mm. Drill countersinks 2.5 3.25 and 3.5 mm. Deburrer/countersink Hole enlarger. Square drive adapter 1/43/8 & 1/2 in. Screwdriver bit Pozi No. 123. Magnetic drivers 6 8 10 and 12 mm. A/F Snappy Pencil Insert bits. Magnetic bit holder (including 5 slotted 3 Pozi 3 Phillips 6 hex and 6 Torx). ...

Available

Specifically manufactured for the kitchen furniture trade for recessing circular hinges. Type 421 has two wings no scribers & centre point while the T421 also has two wings no scribers & no centre point & is best suited for thinner laminate covered boards. These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This hinge sinker is best suited for thinner laminate covered boards. Use with pillar drills only. ...

Archived Product

Self guiding cutters with bearings mounted for trimming & bevelling timber lippings & plastic laminate edges for cabinet making countertop production or any shaping applications. Bearing guided cutters are suitable for both straight & curved work bearings are normally fractionally larger than cutter diameter to avoid surface scoring. Uses: Trimming plastic or plywood overlay. Copy profiling
- use the bearing to follow a template or base edge of board. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2 in Shank. Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90 D = 12.7 mm. C = 25 mm.
...

Archived Product

Electronic variable control of spindle speed under load for a fine finish on all types of material. Soft start feature eliminates sudden movement of machine on start up. Spindle lock & hex collet nut allows easy cutter changes. Precision machined one piece multi slit collet with combined nut. Compact design & low weight make it easy to use especially for intricate work. Adjustable twin rod side fence for guiding along a straight edge. Rating= Professional / Trade Plunge stroke=0 50mm Power input=850w Power ampage=3. 8amp Standard model collet dia. =1 / 4 & 8mm Cutter dia. max. =40mm No load speeds=9 27000 rpm Dust spout size=35mm Guide bush dia. =20mm Weight=3. 0kg Voltages=240v Sound pressure Lpa=81. 0 d B (A)1 Acoustic pressure Lwa=94. 01 d B (A)2 Hand arm vibration= ...

Archived Product

A routing template that allows a router to create a hinge recess on a door. Made from clear 8 mm. thick plastic.

Includes::

...

Available

Hand operated winches ideal for moving & pulling loads & have many uses in DIY leisure & light commercial applications. These winches offer two working loads of 450 kg. or 900 kg. & are perfect for general recovery & loading work such as Cars Boats Lawn Equipment & pulling loads onto trailers or up steep drive-ways. The winches feature hardened steel gears with a smooth action single speed ratcheting crank locking mechanism supported on a heavy plate chassis coated for corrosion resistance. Fitted with a drop forged steel hook with safety pawl & a long 24 cm. handle for easy operation. Note: Do not exceed 180% grade when puling any Weight: load. This product is not designed for lifting. FAIAUWIN900 specifications: Maximum load: 900 kg. Cable length: 10 m. x 5.1. Maximum traction capacity: 2000da N. ...

Available

Ideal for housing cuts where oversize or undersize board is used. Allows wider grooves to be routed by simply rotating the base. Made from clear plastic. Pre-drilled for Trend, Elu & De Walt routers. Can be re-drilled by user to suit other makes of router. The distance from the centre hole to the shortest edge is 100 mm., subsequent edge distances are 101 mm., 102 mm., 103 mm., 104 mm. & 105 mm. Size=200 x 200 x 8 mm. with 1.0 mm. offset. ...

Archived Product

A seven piece template set that allows elliptical picture frames & plaques/plints to be routed. Made from clear 8 mm. thick laser cut plastic. The four picture frame templates & three plaque templates are supplied with pinholes so that they can be secured to the component, or alternatively they can be secured with hot melt glue or double sided sticky tape. Use with a bearing guided 12.7 mm. Diameter: template profiler or laminate trimming router cutter, in a router table or portable use. Back of frame requires 12.7 mm. guided rebate cutter. Frame Sizes= 7 x 9. Plaque Sizes= 3 x 2. Frame Sizes= 5 x 7. Plaque Sizes= 5 x 3 1/2. Frame Sizes= 3 1/2 x 5. Plaque Sizes= 5 29/32 x 4 3/8. Frame Sizes= 6 29/32 x 8 29/32. These two templates are used to create the backs of the three picture frames 7 x 9, 5 x 7 & 3 1/2 x 5. ...

Archived Product

Trend T4elk Router 115v

The Trend T4EK light-duty plunge router is suitable for the hobbyist and light trade user. Features: Variable speed control. Spindle lock. Hex collet nut allows easy cutter changes. 43 mm. Diameter: collar removeable base for carving die grinding and pillar drill fitment. Tapped fixing holes for Trend standard guide bushes. Separate dust spout fixing holes. Adjustable twin rod side fence for guiding along a straight edge. Specifications: Rating: Hobbyist/Light Trade. Plunge stroke: 0-35 mm. Power input: 850 watts. Power ampage: 3.7amp. Standard collet diameter: 1/4 6 mm. and 8 mm. Dust spout size: 34 mm. Guide bush diameter: 16 mm. No load speeds: 11500 - 32000/min. Weight: 2.4 kg. Cutter dia. max: 30 mm. Sound pressure Lpa: 91.1 dB. (A)1. Acoustic pressure Lwa: 104.1 dB. (A)2. Hand arm
vibration: andlt;3.0m/s2.

Availability: In Stock
Supplier: Ebuyer
SKU: 472432

Description Reviews / Comments Add New

Product Description

The Trend T4EK light-duty plunge router is suitable for the hobbyist & light trade user.

Features: Variable speed control. Spindle lock. Hex collet nut allows easy cutter changes. 43 mm. Diameter: collar removeable base for carving die grinding & pillar drill fitment. Tapped fixing holes for Trend standard guide bushes. Separate dust spout fixing holes. Adjustable twin rod side fence for guiding along a straight edge. Specifications: Rating: Hobbyist/ Light Trade. Plunge stroke: 0-3.5cm. Power input: 850 watts. Power ampage: 3.7amp. Standard collet diameter: 1/4 6 mm. & 8 mm. Dust spout

Size: 34 mm. Guide bush diameter: 16 mm. No load speeds: 11500
- 32000/min. Weight: 2.4 kg. Cutter dia. max: 30 mm. Sound pressure Lpa: 91.1 d B. (A)1. Acoustic pressure Lwa: 104.1 d B. (A)2. Hand arm vibration: andlt;3.0m/s 2.

Reviews/Comments

Add New

Intelligent Comparison

Archived Product

Trend T5eb Router Ebuyer

£224.99

Jargon Buster

Diameter - A measurement across a circle passing through the middle

Hand - A part of the body at the end of the arm

Hand - A pointer which indicates time on a clock face

Dust - A general term used for micro particles in the atmosphere

weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz

speed - A measurement of how fast an object travels between two points

grinding - A process for finishing an object to improve the finish of the surface

edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.

edge - The point at which two surfaces meet

Size - is the measurement of how big an object is in space.

Adjustable - Something that can be changed or slightly modified to fit.

Twin - A pair of people or animals that are born at the same time.

Adjustable - Something that can be changed in order to fit better.

Supplier Information

Ebuyer

Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.

More From Contributor

Trend T4elk Router 115v

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account