About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Trend 3/51 X 1/2
Tungsten Carbide Two
Flute Cutter
£22.49
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. T.C.T. Tooling 1/2 in Shank. C = 32 = 9.5 mm. 3/8 in. ...
Archived Product
Trend 3/6 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 3/6 X 1/2
Tungsten Carbide Two
Flute Cutter
£19.49
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. T.C.T. Tooling 1/2 in Shank. C = 19 mm. D = 10 mm. 25/64 in. ...
Archived Product
Trend 3/72 Router Cutter 1/2tct
Trend 3/72 Router
Cutter 1/2tct
£22.49
Use TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods & hard plastics. Two flutes give a clean finish to cut edges. All cutters above & including 9.5 mm. diameter, have TCT plunge centre tips. D=15/32 inch. D=12 mm. C=38 mm. OL=80 mm. Shank Diameter=1/2 inch. ...
Archived Product
Trend 3/83 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 3/83 X 1/2
Tungsten Carbide Two
Flute Cutter
£23.99
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. TCT extra long cutter. Designed for hollow honeycomb board worktops. * Use only on professional routers with 80 mm. deep plunge & suitable one piece multi-slit collet to ensure safe cutter retraction into base. C = 50 mm. D = 12.7 mm. 1/2 in. D = 12.7 mm. C = 50 mm. ...
Archived Product
Trend 3/83d X 1/2 Tungsten Carbide Two Flute Cutter
Trend 3/83d X 1/2
Tungsten Carbide Two
Flute Cutter
£26.50
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling in Shank. Ideal for cutting kitchen worktops C = 50 mm. D = 12.7 mm. in. Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling in Shank. Ideal for cutting kitchen worktops. C = 50 mm. D = 12.7 mm. in. ...
Archived Product
Trend 3/85 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 3/85 X 1/2
Tungsten Carbide Two
Flute Cutter
£31.00
Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. C = 63 mm. D = 12.7 mm. 1/2 in. ...
Archived Product
image missing
Trend 3/8l X 1/4
Tungsten Carbide Two
Flute Cutter
£20.99
Trend D-Namic two flute cutters with extra long Shank s for deep grooving rebating & morticing which are useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual & only cut up to half the diameter of the cutter in one pass. C = 12 mm. D = 19 mm. 15/32 in. OL = 66 mm. ...
Archived Product
Trend 31/02 X 1/4 Tungsten Carbide Dovetail Cutter
Trend 31/02 X 1/4
Tungsten Carbide
Dovetail Cutter
£23.00
Trend dovetail cutters are designed for use with commercial dovetailing & stair housing jigs. Also cutters to produce sliding & lapped dovetails through dovetails & end on dovetails. Suitable for use on natural timbers & man-made boards they are used extensively in cabinet work furniture making stair trenching dovetail jointing & carcass construction. T.C.T.1/4 in. Shank. A = 103 D = 13.2 mm. C = 13 mm. ...
Archived Product
Trend 31/2 X 1/4 Tungsten Carbide Dovetail Cutter
Trend 31/2 X 1/4
Tungsten Carbide
Dovetail Cutter
£20.00
Trend dovetail cutters are designed for use with commercial dovetailing & stair housing jigs. Also cutters to produce sliding & lapped dovetails through dovetails & end on dovetails. Suitable for use on natural timbers & man-made boards they are used extensively in cabinet work furniture making stair trenching dovetail jointing & carcass construction. T.C.T.1/4 in. Shank. A = 103 C = 14 mm. D = 13.2 mm. ...
Archived Product
Trend 331 X 1/2 Tungsten Carbide Aquamac Recessor
Trend 331 X 1/2
Tungsten Carbide
Aquamac Recessor
£85.00
Trend Aquamac 63 recessing sets ref: 330 & 331 are designed to accommodate the popular Schiegel Aquamac 63 weather strip system & allows for a particularly small gap between sash & frame. The slot can be positioned part way down the side of the rebate or at the bottom of the rebate. Ref 330 must be used with a side fence whereas Ref 331 comes complete with a guide bearing to reduce setting up time. TCT. Tooling: 1/2 in Shank D1 = 41.3 mm. D2 = 28.3 mm. C1 = 4.8 mm. C2 = 2.7 mm. B = 22 = 67 mm. ...
Archived Product

Trend 3/83m X 1/2 Tungsten Carbide Two Flute Cutter

Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving rebating mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood and certain hardwoods. T.C.T. Tooling 1/2 in Shank. Short Shank for Makita 3600B and 3612BR Ryobi and Hitachi routers. Ideal for cutting kitchen worktops. C = 50 mm. D = 12.7 mm.
RIP - This product is no longer available on our network. It was last seen on 04.03.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Ebuyer
  • SKU: 467508
Availability: In Stock
£24.50
computers DEFAULT
Description Reviews / Comments Add New

Product Description

Two flute straight cutters produce a cleaner finish than the single flute cutters & are suitable for grooving rebating mortising & drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard MDF plywood & certain hardwoods. T.C.T. Tooling 1/2 in Shank. Short Shank for Makita 3600B & 3612BR Ryobi & Hitachi routers. Ideal for cutting kitchen worktops. C = 50 mm. D = 12.7 mm.

Reviews/Comments

Add New

Intelligent Comparison

Archived Product
Trend 3/83 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 3/83 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer
£23.99
Archived Product
Trend 4/30 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/30 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer
£37.00
Archived Product
Trend 13/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 13/3 X 1/4 Tungsten Carbide Radius Cutter Ebuyer
£38.50
Archived Product
Trend 31/02 X 1/4 Tungsten Carbide Dovetail Cutter
Trend 31/02 X 1/4 Tungsten Carbide Dovetail Cutter Ebuyer
£23.00
Archived Product
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm Ebuyer
£11.00
Archived Product
Trend 9/71 X 1/4 Tungsten Carbide Corner Bead Cutter
Trend 9/71 X 1/4 Tungsten Carbide Corner Bead Cutter Ebuyer
£37.00
Archived Product
Trend 9/73 X 1/4 Tungsten Carbide Corner Bead Cutter
Trend 9/73 X 1/4 Tungsten Carbide Corner Bead Cutter Ebuyer
£56.99
Archived Product
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter Ebuyer
£23.00

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Makita - Makita are high end manufacturers of power tools with experience spanning nearly a century. Long lasting power tools unrivaled in quality and design.
cutting - The seperation of an object usually using a cutting tool such as a knife
Flute - A long silver instrument with buttons to press to make different notes.
Chipboard - A piece of wood like material that us used to pin paper and notes too.
MDF - A shortened term for Medium Density Fibreboard
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Ebuyer
Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.
Page Updated: 2024-03-04 12:41:25

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu