The Japanese long sword " Katana" is produced in a unique, manufacturing process, which has been brought to perfection over centuries
- until today, only a few blacksmith master have the knowledge to manufacture a Katana. The Scythe Katana 3 CPU cooler also arises from a consistent further development & differs from other CPU coolers & is a worthy successor to his precursors, Katana & Katana 2.
...

Scythe Kaze Jyu SLIM 100mm 2000RPM Case/HDD Fan If you need a slim fan than the Kaze Jyu SLIM could be just what you are looking for. The fan is 100mm but it has 92mm fan screw holes so it could replace any existing 92mm fan. The fan is also supplied with a HDD mounting kit, allowing the fan to be mounted directly to any 312;" hard drive to aid cooling.

Features: Super slim
- only 12mm thick Supplied with HDD mounting kit, for HDD cooling Equipped with both 92mm & 100mm screw holes 3-Pin to 4-Pin adapter provided 27.6 CFM / 29.2 d BA / 2000 RPM Specifications Model number
- SY1012SL12M

Dimensions
- 100 x 100 x 12 mm Air volume at full speed (12V), CFM ±10%
- 27.6 Noise level at full speed (12V), d B (A)
- 29.2 Fan speed at full speed (12V), RPM ±10%
- 2000 Connector
- 3-pin (4-pin adaptor included) Cable Length
- 30cm / 11.81 inch Bearing Type
- Sleeve MTBF
- 30, 000 hours Warranty
- 24 months














...

Scythe Kaze Jyuni 500RPM Slip Stream 120mm Fan The Scythe Slip Stream 120mm fan
- designed to increase performance without compromising
...

If space is limited & you need a quiet, low profile CPU cooler then the Kozuti could be it! The Kozuti stands just 40mm tall which makes it an ideal CPU cooler where space is limited. Scythe have achieved this low height by placing the fan underneath the heatsink fins instead of on the top. This obviously reduces the height of the cooler but does not affect its performance. To generate airflow, Scythe have opted for a PWM 80 x 80 x 10mm fan, which also contributes to keeping down the height of the cooler. The fan produces enough airflow for it to be able to cool CPUs that have a Thermal Design Power (TDP) of 95W, but if you want to keep things as quiet as possible, Scythe recommends the Kozuti for CPUs that generate a maximum of 65W. Specifications
- Model No.
- SCKZT-1000 Compatibility
- Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP
- 95W (for quiet operation 65W recommended) Installation Method
- Intel & AMD
- screws, requires motherboard removal Overall

Dimensions
- 110 x 103 x 40 mm Weight Included Fan
- 250 g Fan Model No
- SY8010SL12M-P, 4-pin PWM Fan

Dimensions
- 80 x 80 x 10 mm Fan Speed, RPM
- 800 ±30%
- 3300 ±10% Air Flow, CFM
- 6.0 to 24.8 Noise Level
- 8.2 to 32.5 d BA Input Power
- 2.4 W Input Current
- 0.20 A Voltage Range
- 12 V




















...

Scythe Mini Kaze, 40mm x 10mm Quiet Cooling Fan The Mini Kaze, an ideal replacement for any 40mm chipset, external HDD case cooling fan & removable case cooling fan. Introducing Scythe's quiet 40mm fan to help reduce the noise of your already quiet PC system. This fan is an ideal replacement for any 40mm chipset, external HDD case cooling fan & removable case cooling fan. Features 40 x 10mm quiet PC cooling fan Noise level 14.0 d B (A) 2-pin & 3-pin connectors Great value Perfect for Chipset/VGA Cooling Specifications: Fan size (edge to edge)
- 40 mm Screw hole spacings
- 32 mm Model
- SY124010L Air volume at full speed (12V), CFM ±10%
- 4.11 Noise level at full speed (12V), d B (A)
- 14 Fan speed at full speed (12V), RPM ±10%
- 3500 Weight, g
- 65 Approximate cable length
- 11cm 2-pin, 22cm with 3-pin adapter Life expectancy @ 25°C continuous product use
- 2 years Power connector
- 3-pin & 2-pin Bearing type
- Sleeve Accessories
- 2-pin to 3-pin converter Fan depth
- 10 mm












...

Scythe Mini Kaze 60mm Quiet Fan Scythe's 60mm Mini Kaze is designed to replace any 12V 60mm 2-pin or 3-pin fan, whilst making only a fraction of the noise. Scythe's 60mm Mini Kaze is designed to replace any other 12V 60mm fan, whilst making only a fraction of the noise. The Silent Mini Kaze 60mm fan comes with a 2-pin connector. Included with the fan is an adapter to convert the 2-pin connector to a standard 3-pin connector, thus providing the best compatibility for both old & new hardware. Note: This fan is supplied with mounting bolts & not self-tapping screws. Features Ideal replacement for very noisy 60mm fans 2-pin & 3-pin connectors Great value 20mm thick Specifications:

Dimensions
- 60 x 60 x 20 mm Screw hole spacings
- 50 mm Weight
- 48 g Noise Level
- 19.99 d BA Air Flow
- 12.3 CFM Fan Speed
- 2, 500 rpm Starting Voltage
- 9 V Operating Voltage
- 10.8 ~ 13.2 V MTBF
- 30, 000 h Accessories
- Mounting Screws, 2-pin to 3-pin adapter Warranty
- 24 months












...

Scythe Mini Kaze Ultra, 40mm x 20mm Quiet Cooling Fan Features 40 x 20mm quiet PC cooling fan Noise level 19.6 d B (A) 2-pin & 3-pin connectors Great value Perfect for Chipset/VGA Cooling Specifications: Fan size (edge to edge)
- 40 mm Screw hole spacings
- 32 mm Model
- SY124020L Air volume at full speed (12V), CFM ±10%
- 4.86 Noise level at full speed (12V), d B (A)
- 19.56 Fan speed at full speed (12V), RPM ±10%
- 3500 Weight, g
- 80 Approximate cable length
- 11cm 2-pin, 22cm 3-pin Life expectancy @ 25°C continuous product use
- 2 years Power connector
- 3-pin & 2-pin Bearing type
- Sleeve Accessories
- 2-pin to 3-pin converter Fan depth
- 20 mm Rated voltage
- 12 VDC Warranty
- 24 months














...

The third version of Mugen provides higher compatibility, a more compactly designed fin arrangement & a better thought out backplate. The total cooling performance has been increased by refining the M.A.P.S. (Multiple Airflow Pass-through Structure). The Mugen 3 comes with a very quiet " Slip Stream" PWM fan for minimising the noise level at low load as well as maintaining cooling performance at heavy load. Features Greater performance over the Mugen 2 Total of six U-shaped heatpipes Features MAPS for better airflow Extremely quiet, from only 9.6 d BA Compatible with Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Specifications Model Number. SCMG-3000 Compatibility Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP All Installation Method Intel & AMD
- backplate, requires motherboard removal Combined

Dimensions 130 x 100 x 158 mm Fan

Dimensions 120 x 120 x 25 mm Noise Level 9.60
- 32.15 d BA Air Flow 14.7
- 88.11 CFM Fan Speed 300 (±180 RPM)
- 1600 (±10%) Static Pressure 0.34 mm H2O / 3.33 Pa Weight 825 g Material of Base Plate Nickel-plated copper Warranty 24 months EAN barcode 4571225048345







...

Introducing the third generation of the Mugen CPU cooler from Scythe which now features greater performance & easier installation compared to the Mugen 2. The third version of Mugen provides higher compatibility, a more compactly designed fin arrangement & a better thought out backplate. The total cooling performance has been increased by refining the M.A.P.S. (Multiple Airflow Pass-through Structure). The Mugen 3 comes with a very quiet " Slip Stream" PWM fan for minimising the noise level at low load as well as maintaining cooling performance at heavy load. F.M.S.B.4 (Flip Mount Super Back-Plate 4) Introducing F.M.B.S.4 (Flip Mount Super Back-Plate 4) for higher compatibility with new generation motherboards! This universally compatible Back-Plate is capable of mounting large coolers extremely securely! Slip Stream PWM + Wide Range Cooling Purposes The fan motor applied is a Slipstream PWM 120 x 120 x 25mm small axis large fan blade model, which minimises the noise at low load, as well as maximising the performance of Mugen 3 during heavy load periods. The fan runs at a minimum speed of around 300 RPM up to 1600 RPM, generating air flow from 14.7 to 88.1 CFM & noise levels of 9.6 ~ 32.15 d BA respectively. The overall cooling has been carefully designed to meet Scythes Wide Range Cooling Purposes philosophy, providing high level performance for both users who require a very quiet cooler or users who want maximum performance. M.A.P.S. (Multiple Airflow Pass-Through Structure) By introducing the newly refined M.A.P.S. (Multiple Airflow Pass-through Structure) the total cooling performance has been upgraded by optimising the pass-through function of the airflow & enhancement of the sturdiness of the heatsink. Specifications
- Model Number
- SCMG-3000 Compatibility
- Intel LGA2011/1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP
- All Installation Method
- Intel & AMD
- backplate, requires motherboard removal Combined

Dimensions
- 130 x 100 x 158 mm Fan

Dimensions
- 120 x 120 x 25 mm Noise Level
- 9.60
- 32.15 d BA Air Flow
- 14.7
- 88.11 CFM Fan Speed
- 300 (±180 RPM)
- 1600 (±10%) Static Pressure
- 0.34 mm H2O / 3.33 Pa Weight
- 825 g Material of Base Plate
- Nickel-plated copper




















...

Scythe Mugen 4 High Performance CPU Cooler, SCMG-4000 The next instalment of Mugen provides a three-dimensional multiple airflow pass-through structure fin design, greater compatibility & an easy mounting method. The Mugen 4 comes with a very quiet Glide Stream PWM fan (starts at only 5.3 d BA) to minimise the noise level at low load as well as maintaining cooling performance at heavy load.

Features: Greater performance over the Mugen 3 Total of six U-shaped heatpipes Features TMAPS for better airflow & performance Extremely quiet, from only 5.3 d BA Compatible with Intel LGA2011/1366/1150/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 T-M.A.P.S. (Three-dimensional Multiple Airflow Pass- through Structure): The Mugen 4s unique fin structure decreases air resistance & optimises cooling performance in the lower rpm-range of the supplied fan. Furthermore, the smart arrangement of the fin layout made space for one more pair of fins without negatively affecting the total height. User-friendly Installation: The fundamental change to the Mugen 3 is in the mounting system of the Mugen 4. The new H.P.M.S (Hyper Precision Mounting System) makes easy mounting possible by allowing the Mugen 4 to be fitted without having to remove the motherboard from the case. This reduces the number of steps involved & makes for an easier life! Multi Fan Mount Structure: Following in its predecessors footsteps, the Mugen 4s design also allows variable fan placement to optimise a targeted airflow. To further enhance cooling performance, a second fan can be mounted with the supplied pair of fan clips. Specifications: Model Number
- SCMG-4000 Compatibility
- Intel LGA2011/1366/1150/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP
- All Installation Method
- Intel & AMD
- backplate, ideally requires motherboard removal Combined

Dimensions
- 130 x 88 x 156.5 mm Fan

Dimensions 120 x 120 x 25 mm Noise Level
- 5.3
- 28.0 d BA Air Flow
- 20.7
- 79.0 CFM Fan Speed
- 400 (±200 RPM)
- 1400 (±10%) PWM Static Pressure 0.12
- 1.56 mm H2O Weight 625g heatsink only Material of Base Plate Nickel-plated copper Warranty
- 24 months



















...