The largest Mini Kaze variant (60x 60x 20 mm) is characterised by high power at low operational sound. A large number of possible application areas make this fan the ideal choice for many users. By using a 2-pin to 3-pin adapter, one can use the Mini Kaze 60 cm fan for cooling the chip set in external hard disk casings or in a picture frame with a removeable back. The fan was set to an optimum speed of 2, 500 RPM, in order to generate the lowest possible volume. ...

Gentle Typhoon 120 mm High Speed Series are optimised for high speed as well as high airflow. An implemented ring connects the fan blades creating characteristics similar to 38mm thick fans, while running at a quieter noise level. By employing a large fan motor, little fluctuation in rotation torque has been achieved. Furthermore, a vibration absorbing structure has been integrated to further help reduce the noise level. Optimized for High Airflow Forceful airflow is created & guided in a linear fashion thanks to the implemented stabilising ring. By using this powerful design the fans are able to generate high pressure to overcome & handle high resistance such as when being used with a duct or coolers with dense fin structure. Vibration Reduction Structure By employing a large fan motor, little fluctuation in rotation torque has been achieved. Furthermore, an anti-vibration absorbing structure has been integrated to further reduce the noise level. This combination greatly reduces the transfer of vibration from the motor to the fan chassis. Weight 205 g Dimensions 120 x 120 x 25 mm Maximum air flow, CFM ±10% 83.0 Maximum noise level, d B (A) 36.5 Maximum fan speed, RPM ±10% 3000 Power Consumption 2.64 W Rated Current 0.22 A Starting Current 0.97 A Cable Length 30 cm Bearing Type Double Ball Bearing MTBF 100, 000 hour at 35°C or 60, 000 hours at 60°C Accessories 4-pin Molex Adapter, 4x Screws Warranty 24 months ...

The Japanese long sword " Katana" is produced in a unique, manufacturing process, which has been brought to perfection over centuries
- until today, only a few blacksmith master have the knowledge to manufacture a Katana. The Scythe Katana 3 CPU cooler also arises from a consistent further development & differs from other CPU coolers & is a worthy successor to his precursors, Katana & Katana 2.
...

Scythe Kaze Jyu SLIM 100mm 2000RPM Case/HDD Fan If you need a slim fan than the Kaze Jyu SLIM could be just what you are looking for. The fan is 100mm but it has 92mm fan screw holes so it could replace any existing 92mm fan. The fan is also supplied with a HDD mounting kit, allowing the fan to be mounted directly to any 312;" hard drive to aid cooling.

Features: Super slim
- only 12mm thick Supplied with HDD mounting kit, for HDD cooling Equipped with both 92mm & 100mm screw holes 3-Pin to 4-Pin adapter provided 27.6 CFM / 29.2 d BA / 2000 RPM Specifications Model number
- SY1012SL12M

Dimensions
- 100 x 100 x 12 mm Air volume at full speed (12V), CFM ±10%
- 27.6 Noise level at full speed (12V), d B (A)
- 29.2 Fan speed at full speed (12V), RPM ±10%
- 2000 Connector
- 3-pin (4-pin adaptor included) Cable Length
- 30cm / 11.81 inch Bearing Type
- Sleeve MTBF
- 30, 000 hours Warranty
- 24 months














...

Scythe Kaze Jyuni 500RPM Slip Stream 120mm Fan The Scythe Slip Stream 120mm fan
- designed to increase performance without compromising
...

Scythe Mini Kaze, 40mm x 10mm Quiet Cooling Fan The Mini Kaze, an ideal replacement for any 40mm chipset, external HDD case cooling fan & removable case cooling fan. Introducing Scythe's quiet 40mm fan to help reduce the noise of your already quiet PC system. This fan is an ideal replacement for any 40mm chipset, external HDD case cooling fan & removable case cooling fan. Features 40 x 10mm quiet PC cooling fan Noise level 14.0 d B (A) 2-pin & 3-pin connectors Great value Perfect for Chipset/VGA Cooling Specifications: Fan size (edge to edge)
- 40 mm Screw hole spacings
- 32 mm Model
- SY124010L Air volume at full speed (12V), CFM ±10%
- 4.11 Noise level at full speed (12V), d B (A)
- 14 Fan speed at full speed (12V), RPM ±10%
- 3500 Weight, g
- 65 Approximate cable length
- 11cm 2-pin, 22cm with 3-pin adapter Life expectancy @ 25°C continuous product use
- 2 years Power connector
- 3-pin & 2-pin Bearing type
- Sleeve Accessories
- 2-pin to 3-pin converter Fan depth
- 10 mm












...

Scythe Mini Kaze 50mm Quiet Fan Scythe's 50mm Mini Kaze is designed to replace any 12V 50mm 2-pin or 3-pin fan, whilst making only a fraction of the noise. Scythe's 50mm Mini Kaze is designed to replace any other 12V 50mm fan, whilst making only a fraction of the noise. The Silent Mini Kaze 50mm fan uses by default a 2-pin connector. Included with the fan is an adapter to convert the 2-pin connector to a standard 3-pin connector, thus providing the best compatibility for both old & new hardware. Features Ideal replacement for very noisy 50mm fans 2-pin & 3-pin connectors Great value Specifications:

Dimensions
- 50 x 50 x 10 mm Distance between hole centres
- 40 mm Weight
- 21g Noise Level
- 26.09 d BA Air Flow
- 9.4 CFM Fan Speed
- 4, 500 rpm Starting Voltage
- 9 V Current
- 0.06A Operating Voltage
- 10.8 ~ 13.2 V MTBF
- 30, 000 h Accessories
- Mounting Screws, 2-pin to 3-pin adapter Warranty
- 24 months













...

Scythe Mini Kaze 60mm Quiet Fan Scythe's 60mm Mini Kaze is designed to replace any 12V 60mm 2-pin or 3-pin fan, whilst making only a fraction of the noise. Scythe's 60mm Mini Kaze is designed to replace any other 12V 60mm fan, whilst making only a fraction of the noise. The Silent Mini Kaze 60mm fan comes with a 2-pin connector. Included with the fan is an adapter to convert the 2-pin connector to a standard 3-pin connector, thus providing the best compatibility for both old & new hardware. Note: This fan is supplied with mounting bolts & not self-tapping screws. Features Ideal replacement for very noisy 60mm fans 2-pin & 3-pin connectors Great value 20mm thick Specifications:

Dimensions
- 60 x 60 x 20 mm Screw hole spacings
- 50 mm Weight
- 48 g Noise Level
- 19.99 d BA Air Flow
- 12.3 CFM Fan Speed
- 2, 500 rpm Starting Voltage
- 9 V Operating Voltage
- 10.8 ~ 13.2 V MTBF
- 30, 000 h Accessories
- Mounting Screws, 2-pin to 3-pin adapter Warranty
- 24 months












...

Scythe Mini Kaze Ultra, 40mm x 20mm Quiet Cooling Fan Features 40 x 20mm quiet PC cooling fan Noise level 19.6 d B (A) 2-pin & 3-pin connectors Great value Perfect for Chipset/VGA Cooling Specifications: Fan size (edge to edge)
- 40 mm Screw hole spacings
- 32 mm Model
- SY124020L Air volume at full speed (12V), CFM ±10%
- 4.86 Noise level at full speed (12V), d B (A)
- 19.56 Fan speed at full speed (12V), RPM ±10%
- 3500 Weight, g
- 80 Approximate cable length
- 11cm 2-pin, 22cm 3-pin Life expectancy @ 25°C continuous product use
- 2 years Power connector
- 3-pin & 2-pin Bearing type
- Sleeve Accessories
- 2-pin to 3-pin converter Fan depth
- 20 mm Rated voltage
- 12 VDC Warranty
- 24 months














...

The third version of Mugen provides higher compatibility, a more compactly designed fin arrangement & a better thought out backplate. The total cooling performance has been increased by refining the M.A.P.S. (Multiple Airflow Pass-through Structure). The Mugen 3 comes with a very quiet " Slip Stream" PWM fan for minimising the noise level at low load as well as maintaining cooling performance at heavy load. Features Greater performance over the Mugen 2 Total of six U-shaped heatpipes Features MAPS for better airflow Extremely quiet, from only 9.6 d BA Compatible with Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Specifications Model Number. SCMG-3000 Compatibility Intel LGA1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP All Installation Method Intel & AMD
- backplate, requires motherboard removal Combined

Dimensions 130 x 100 x 158 mm Fan

Dimensions 120 x 120 x 25 mm Noise Level 9.60
- 32.15 d BA Air Flow 14.7
- 88.11 CFM Fan Speed 300 (±180 RPM)
- 1600 (±10%) Static Pressure 0.34 mm H2O / 3.33 Pa Weight 825 g Material of Base Plate Nickel-plated copper Warranty 24 months EAN barcode 4571225048345







...