The Cisco Catalyst 3560 Series switches is a line of fixed configuration, enterprise-class switches that provide availability, security, & quality of service (Qo S) to enhance network operations. The Catalyst 3560 is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products & applications such as IP telephones, wireless access points, video surveillance, building management systems, & remote video kiosks. Customers can deploy network-wide intelligent services, such as advanced Qo S, rate limiting, access control lists (ACLs), multicast management, & high-performance IP routing
- while maintaining the simplicity of traditional LAN switching. Embedded in the Catalyst 3560 is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure & troubleshoot multiple Cisco Catalyst desktop switches using a standard Web browser. Cisco CMS Software provides configuration wizards that greatly simplify the implementation of converged networks & intelligent network services. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

The Cisco Catalyst 3560 is an ideal access layer switch for small enterprise LAN access or branch-office environments, enabling the deployment of new applications such as IP telephony, wireless access, video surveillance, building management systems, & remote video kiosks. Customers can deploy networkwide intelligent services-such as advanced quality of service (Qo S), rate limiting, access control lists (ACLs), multicast management, & high-performance IP routing-while maintaining the simplicity of traditional LAN switching. PRODUCT

Features: 24 Ethernet 10/100 ports & 2 SFP-based Gigabit Ethernet ports; 1RU fixed-configuration, multilayer switch; Enterprise-class intelligent services delivered to the network edge; Standard Multilayer Software Image (SMI) installed; Basic RIP & static routing, upgradeable to full dynamic IP routing.

...

The Cisco Catalyst 3560 Series is a line of fixed-configuration, enterprise-class switches that include IEEE 802.3af & Cisco prestandard Power over Ethernet (Po E) functionality in Fast Ethernet & Gigabit Ethernet configurations. The Cisco Catalyst 3560 is an ideal access layer switch for small enterprise LAN access or branch-office environments, combining both 10/100/1000 & Po E configurations for maximum productivity & investment protection while enabling the deployment of new applications such as IP telephony, wireless access, video surveillance, building management systems, & remote video kiosks. Customers can deploy networkwide intelligent services-such as advanced quality of service (Qo S), rate limiting, access control lists (ACLs), multicast management, & high-performance IP routing-while maintaining the simplicity of traditional LAN switching. Available for the Cisco Catalyst 3560 Series at no charge, the Cisco Network Assistant is a centralized management application that simplifies the administration tasks for Cisco switches, routers, & wireless access points. Cisco Network Assistant provides configuration wizards that greatly simplify the implementation of converged networks & intelligent network services. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Embrace amazing Io T possibilities with Po E The Cisco Catalyst 3560-CX switches enable you to bring sensors, LED lights, building controllers, and other Io T devices onto the network using Power over Ethernet (Po E). The many features & controls offered by these Po E switches make them run more efficiently & reliably. For example, Cisco Perpetual Po E continues powering endpoints even during a switch boot, maximizing uptime. So there's no need for backup power. The switches provide up to 240 watts of power for Po E devices
- twice the capacity of current switches. Security & operational simplicity For simplified management, these switches have the option to run in Cisco Instant Access mode. Instant Access provides a single point of operation & management for your campus networks. & they support Cisco Plug & Play (Pn P) technology, which automates network device deployments. Main Specifications
- Product Description: Cisco Catalyst 3560CX-12PC-S
- switch
- 12 ports
- Managed
- desktop, rack-mountable, DIN rail mountable, wall-mountable
- Device Type: Switch
- 12 ports
- Managed
- Enclosure Type: Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 12 x 10/ 100/ 1000 (Po E+) + 2 x combo Gigabit SFP
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 240W
- Performance: Forwarding performance:16 Gbps Forwarding performance (64-byte packet size):23.8 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9018 bytes
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
-

Features: BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Access Control List (ACL) support, Quality of Service (Qo S), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (Co S), Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az
- Power: AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 26.9 cm x 23.8 cm x 4.44 cm
- Weight: 2.31kg
- Manufacturer Warranty: Limited lifetime warranty


























...

Embrace amazing Io T possibilities with Po E The Cisco Catalyst 3560-CX switches enable you to bring sensors, LED lights, building controllers, and other Io T devices onto the network using Power over Ethernet (Po E). The many features & controls offered by these Po E switches make them run more efficiently & reliably. For example, Cisco Perpetual Po E continues powering endpoints even during a switch boot, maximizing uptime. So there's no need for backup power. The switches provide up to 240 watts of power for Po E devices
- twice the capacity of current switches. Security & operational simplicity For simplified management, these switches have the option to run in Cisco Instant Access mode. Instant Access provides a single point of operation & management for your campus networks. & they support Cisco Plug & Play (Pn P) technology, which automates network device deployments. Main Specifications
- Product Description: Cisco Catalyst 3560CX-12PD-S
- switch
- 12 ports
- Managed
- desktop, rack-mountable, DIN rail mountable, wall-mountable
- Device Type: Switch
- 12 ports
- Managed
- Enclosure Type: Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 12 x 10/ 100/ 1000 (Po E+) + 2 x combo SFP+
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 240W
- Performance: Forwarding performance:34 Gbps Forwarding performance (64-byte packet size):50.6 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9018 bytes
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
-

Features: BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Access Control List (ACL) support, Quality of Service (Qo S), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (Co S), Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az
- Power: AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 26.9 cm x 23.8 cm x 4.44 cm
- Weight: 2.31kg
- Manufacturer Warranty: Limited lifetime warranty


























...

Small form factor, fan-less design, silent operation The switch can be used in open workspaces & other areas that can't tolerate equipment noise & where multiple cable runs could be difficult, expensive, and intrusive. Flexible mounting options The switch can be mounted on the wall, under a desk, rack, DIN rail, or practically anywhere they're needed. Perpetual Po E It provides uninterrupted power to a powered-down device even when the switch is booting. This eliminates the need for a backup power source. Threat defense Advanced, integrated security features provide threat defense capabilities for mitigating man-in-the-middle attacks & protecting your critical network infrastructure. Switch hibernate mode This technology puts the switch in an ultra-low power mode during periods of non-operation such as nights & weekends. Main Specifications
- Product Description: Cisco Catalyst 3560CX-8PC-S
- switch
- 8 ports
- Managed
- desktop
- Device Type: Switch
- 8 ports
- Managed
- Enclosure Type: Desktop 1U
- Subtype: Gigabit Ethernet
- Ports: 8 x 10/ 100/ 1000 (Po E+) + 2 x combo Gigabit SFP
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 240W
- Performance: Forwarding performance (64-byte packet size):17.9 Mpps
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP
-

Features: Full duplex capability, Layer 3 switching, Layer 2 switching, auto-sensing per device, IP-routing, DHCP support, power over Ethernet (Po E), auto-negotiation, trunking, MPLS support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, traffic shaping, manageable, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (Qo S), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
- Power: AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 26.9 cm x 23.8 cm x 4.44 cm
- Weight: 2.27kg






















...

Small form factor, fanless design & silent operation The switch can be used in open workspaces & other areas that cannot tolerate equipment noise & where multiple cable runs could be difficult, expensive, and intrusive. Flexible mounting The switch can be mounted on the wall, under a desk, rack, DIN rail, or practically anywhere they are needed. 10 Gigabit SFP+ uplinks Accommodates business growth & increased traffic, such as aggregate upstream gigabit traffic loads from 802.11ac Wi-Fi access points. Po E pass-through Po E pass-through gives the ability to power Po E end devices through drawing Cisco UPOE from the wiring closet. The Catalyst has eight downlink ports with two Cisco UPOE input ports that allow it to be powered by another switch. These switches do not need a power supply & receive power over the uplink from an upstream Po E or Cisco UPOE device, providing deployment flexibility & availability. These switches are ideal for wiring-constrained & space-constrained applications. Cisco Instant Access mode This mode enables a single point of management & operation for campus networks. Catalyst compact switch with 10 G SFP+ uplinks can be connected to the core switches, and the entire configuration can then work as a single extended switch with a common management domain. Cisco Network Plug-&-Play Network Plug-&-Play is a secure, scalable solution that accelerates network device deployments by automating the installation & configuration of Cisco IOS software. The switch can be used as part of the APIC-EM solution for automated switch deployments. This feature helps improve productivity, cut costs, reduce downtime, and enhance the user experience. Main Specifications
- Product Description: Cisco Catalyst 3560CX-8PT-S
- switch
- 8 ports
- Managed
- desktop, rack-mountable, DIN rail mountable, wall-mountable
- Device Type: Switch
- 8 ports
- Managed
- Enclosure Type: Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- Subtype: 10 Gigabit Ethernet
- Ports: 10 x 10/ 100/ 1000 (Po E+)
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 146 W
- Performance: Forwarding performance (64-byte packet size):14.9 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9198 bytes
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
-

Features: Full duplex capability, DHCP support, auto-negotiation, BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (Qo S), Dynamic ARP Inspection (DAI), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (Co S), Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az
- Dimensions: (Wx Dx H) 26.9 cm x 17.7 cm x 4.44 cm
- Weight: 1.58kg
- Manufacturer Warranty: Limited lifetime warranty
























...

- Product Description: Cisco Catalyst 3560CX-8TC-S
- switch
- 8 ports
- Managed
- desktop, rack-mountable, DIN rail



...

The Cisco Catalyst compact switches easily expand your Ethernet & Multigigabit Ethernet Cisco Catalyst switching infrastructure outside the wiring closet to enable more workspaces, extend wireless LANs, & connect Po E devices. These fanless, small form-factor switches are ideal for space-constrained deployments where multiple cable runs would be challenging. The Cisco Catalyst 3560CX Multigigabit Ethernet switches support wireless speeds & standards on existing cabling infrastructure. ...

Cisco Catalyst 3560-E Series is an enterprise-class line of standalone access & aggregation switches that facilitate the deployment of secure converged applications while maximizing investment protection for evolving network & application requirements. Combining 10/100/1000 & Power over Ethernet (Po E) configurations with 10 Gigabit Ethernet uplinks, the Cisco Catalyst 3560-E Series access switches enhance worker productivity by enabling applications such as IP telephony, wireless, & video. Cisco Catalyst 3560-E Series aggregation switches deliver secure non-stop unified network services & versatile connectivity in a one rack-unit (1-RU) form factor for space & power constrained environments, enabling businesses to reduce total cost of ownership while maximizing investment protection. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...