Cisco Catalyst 2960 Series Intelligent Ethernet Switches are a new family of fixed-configuration standalone devices that provide desktop Fast Ethernet & Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, mid-market, & branch office networks. The Catalyst 2960 Series offers integrated security, including network admission control (NAC), advanced quality of service (Qo S), & resiliency to deliver intelligent services for the network edge. ...

Cisco Catalyst 2960 Series Intelligent Ethernet Switches enable entry-level enterprise, medium-sized, & branch office networks to provide enhanced LAN services. This family of fixed-configuration, standalone devices provide desktop 10/100 Fast Ethernet & 10/100/1000 Gigabit Ethernet connectivity. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Cisco Catalyst 2960 Series Intelligent Ethernet Switches are a new family of fixed-configuration standalone devices that provide desktop Fast Ethernet & Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, mid-market, & branch office networks. The Catalyst 2960 Series offers integrated security, including network admission control (NAC), advanced quality of service (Qo S), & resiliency to deliver intelligent services for the network edge. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Cisco Catalyst 2960 series switches are fixed-configuration, standalone switches that provide desktop Fast Ethernet connectivity for entry-level wiring closet & small branch-office networks. These switches simplify the migration from non-intelligent hubs & unmanaged switches to a fully scalable managed network. ...

Cisco Catalyst 2960 Series Intelligent Ethernet Switches are a family of fixed-configuration, standalone devices that provide desktop Fast Ethernet & Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, mid-market, & branch office networks. The Catalyst 2960 Series offers integrated security, including network admission control (NAC), advanced quality of service (Qo S), & resiliency to deliver intelligent services for the network edge. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Catalyst 2960-Plus series switches are fixed-configuration Fast Ethernet switches that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. They enable reliable & secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst Smart Operations.
- Product Description: Cisco Catalyst 2960-Plus 24LC-L
- switch
- 24 ports
- Managed
- rack-mountable
- Device Type: Switch
- 24 ports
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 16 x 10/ 100 + 8 x 10/ 100 (Po E) + 2 x combo Gigabit SFP
- Power Over Ethernet (Po E): Po E
- Po E Budget 123 W
- Performance: Switching capacity:16 Gbps Forwarding performance (64-byte packet size):6.5 Mpps
- Capacity: Active VLANs:64
- Jumbo Frame Support: 9018 bytes
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP
-

Features: Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (Po E), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Syslog support, Diff Serv support, Broadcast Storm Control, IPv 6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Access Control List (ACL) support, Quality of Service (Qo S), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V (50/ 60 Hz )
-

Dimensions (Wx Dx H) 45 cm x 33.2 cm x 4.4 cm
- Weight 4.5kg

























...

Enterprise-class quality of service The Cisco 2960-Plus Series Switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Cisco Catalyst Smart Operations Cisco Catalyst Smart Operations is A superbly comprehensive set of capabilities that simplify LAN planning, deployment, monitoring, and troubleshooting. Deploying Smart Operations tools reduces the time & effort required to operate the network & lowers total cost of ownership (TCO). Cisco Energy Wise Cisco Energy Wise empowers IT teams to measure & manage the power consumed by devices connected to the network, providing measurable energy savings & reduced greenhouse gas emissions. Energy Wise policies can be used to control the power consumed by Po E-powered endpoints, desktop & data-center IT equipment, and a wide range of building infrastructure. Energy Wise technology is included on all Cisco Catalyst 2960-Plus Series Switches. Power over Ethernet Cisco Catalyst 2960-Plus switches support IEEE 802.3af Power over Ethernet (Po E) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Network management The Cisco Catalyst 2960-Plus Series Switches offer a superior CLI for detailed configuration & administration. 2960-Plus switches are also supported in the full range of Cisco network management solutions. Main Specifications
- Product Description: Cisco Catalyst 2960-Plus 24LC-S
- switch
- 24 ports
- Managed
- rack-mountable
- Device Type: Switch
- 24 ports
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 24 x 10/ 100 + 2 x combo Gigabit SFP
- Power Over Ethernet (Po E): Po E
- Po E Budget: 123 W
- Performance: Switching capacity:16 Gbps Forwarding performance (64-byte packet size):6.5 Mpps
- Capacity: Active VLANs:64
- Jumbo Frame Support: 9018 bytes
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP
-

Features: Layer 2 switching, auto-sensing per device, DHCP support, power over Ethernet (Po E), auto-negotiation, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Syslog support, Diff Serv support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Quality of Service (Qo S), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 45 cm x 33.2 cm x 4.4 cm
- Weight: 4.5kg
- Manufacturer Warranty: Limited lifetime warranty
























...

Enterprise-class quality of service The Cisco 2960-Plus Series Switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Cisco Catalyst Smart Operations Cisco Catalyst Smart Operations is A superbly comprehensive set of capabilities that simplify LAN planning, deployment, monitoring, and troubleshooting. Deploying Smart Operations tools reduces the time & effort required to operate the network & lowers total cost of ownership (TCO). Cisco Energy Wise Cisco Energy Wise empowers IT teams to measure & manage the power consumed by devices connected to the network, providing measurable energy savings & reduced greenhouse gas emissions. Energy Wise policies can be used to control the power consumed by Po E-powered endpoints, desktop & data-center IT equipment, and a wide range of building infrastructure. Energy Wise technology is included on all Cisco Catalyst 2960-Plus Series Switches. Power over Ethernet Cisco Catalyst 2960-Plus switches support IEEE 802.3af Power over Ethernet (Po E) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Network management The Cisco Catalyst 2960-Plus Series Switches offer a superior CLI for detailed configuration & administration. 2960-Plus switches are also supported in the full range of Cisco network management solutions. Main Specifications
- Product Description: Cisco Catalyst 2960-Plus 24PC-S
- switch
- 24 ports
- Managed
- rack-mountable
- Device Type: Switch
- 24 ports
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 24 x 10/ 100 (Po E) + 2 x combo Gigabit SFP
- Power Over Ethernet (Po E): Po E
- Po E Budget: 370 W
- Performance: Switching capacity:16 Gbps Forwarding performance (64-byte packet size):6.5 Mpps
- Capacity: Active VLANs:64
- Jumbo Frame Support: 9018 bytes
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, CLI
- Features Full duplex capability, BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (Qo S), Dynamic ARP Inspection (DAI), Cisco Energy Wise technology, Shaped Round Robin (SRR), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Management Information Base (MIB), Class of Service (Co S), Diff Serv Code Point (DSCP) support
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP) Power AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 45 cm x 33.2 cm x 4.4 cm
- Weight: 5.4kg
- Manufacturer Warranty: Limited lifetime warranty





















...

The Cisco Catalyst 2960-Plus series switches are fixed-configuration Fast Ethernet switches that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. They enable reliable & secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst Smart Operations. Features Enterprise-class quality of service The Cisco 2960-Plus series switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Cisco Catalyst Smart Operations Cisco Catalyst Smart Operations is A superbly comprehensive set of capabilities that simplify LAN planning, deployment, monitoring, and troubleshooting. Deploying Smart Operations tools reduces the time & effort required to operate the network & lowers total cost of ownership (TCO). Cisco Energy Wise Cisco Energy Wise empowers IT teams to measure & manage the power consumed by devices connected to the network, providing measurable energy savings & reduced greenhouse gas emissions. Energy Wise policies can be used to control the power consumed by Po E-powered endpoints, desktop & data-center IT equipment, and a wide range of building infrastructure. Energy Wise technology is included on all Cisco Catalyst 2960-Plus Series Switches. Power over Ethernet Cisco Catalyst 2960-Plus switches support IEEE 802.3af Power over Ethernet (Po E) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Network management The Cisco Catalyst 2960-Plus series switches offer a superior CLI for detailed configuration & administration. 2960-Plus switches are also supported in the full range of Cisco network management solutions. ...

Enterprise-class quality of service The Cisco 2960-Plus series switch offers intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Cisco Energy Wise Cisco Energy Wise empowers IT teams to measure & manage the power consumed by devices connected to the network, providing measurable energy savings & reduced greenhouse gas emissions. Energy Wise policies can be used to control the power consumed by Po E-powered endpoints, desktop & data-center IT equipment, and a wide range of building infrastructure. Power over Ethernet Cisco Catalyst 2960-Plus switch supports IEEE 802.3af Power over Ethernet (Po E) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Network management The Cisco Catalyst 2960-Plus series switch offers a superior CLI for detailed configuration & administration. 2960-Plus switch is also supported in the full range of Cisco network management solutions. Main Specifications
- Product Description: Cisco Catalyst 2960-Plus 48PST-L
- switch
- 48 ports
- Managed
- rack-mountable
- Device Type: Switch
- 48 ports
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 48 x 10/ 100 (Po E) + 2 x Gigabit SFP + 2 x 10/ 100/ 1000
- Power Over Ethernet (Po E): Po E
- Po E Budget: 370W
- Performance: Switching capacity:16 Gbps Forwarding performance (64-byte packet size):13.1 Mpps
- Capacity: Active VLANs:255
- Jumbo Frame Support: 9018 bytes
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP
-

Features: Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (Po E), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Syslog support, Diff Serv support, Broadcast Storm Control, IPv 6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Access Control List (ACL) support, Quality of Service (Qo S), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 45 cm x 33.2 cm x 4.4 cm
- Weight: 5.4kg
- Manufacturer Warranty: Limited lifetime warranty
























...