The Cisco Catalyst 2960S Series Switches are the leading layer 2 edge, providing enhanced ease of use, highly secure business operations, enhanced sustainability, & a borderless network experience. The Cisco Catalyst 2960S Series Switches include Cisco Flex Stack switch stacking capability with 1 & 10 Gigabit connectivity. The Cisco Catalyst 2960S Series are fixed-configuration access switches designed for enterprise, midmarket, & branch office networks to provide lower total cost of ownership. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Catalyst 2960S Series Switches are the leading layer 2 edge, providing enhanced ease of use, highly secure business operations, enhanced sustainability, & a borderless network experience. The Cisco Catalyst 2960S Series Switches include Cisco Flex Stack switch stacking capability with 1 & 10 Gigabit connectivity. The Cisco Catalyst 2960S Series are fixed-configuration access switches designed for enterprise, midmarket, & branch office networks to provide lower total cost of ownership. ...

The Cisco Catalyst 2960S Series Switches are the leading layer 2 edge, providing enhanced ease of use, highly secure business operations, enhanced sustainability, & a borderless network experience. The Cisco Catalyst 2960S Series Switches include Cisco Flex Stack switch stacking capability with 1 & 10 Gigabit connectivity. The Cisco Catalyst 2960S Series are fixed-configuration access switches designed for enterprise, midmarket, & branch office networks to provide lower total cost of ownership. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Catalyst 2960-S series switch is the leading layer 2 edge, providing enhanced ease of use, highly secure business operations, enhanced sustainability, & a borderless network experience. The Cisco Catalyst 2960-S series switch

Includes:: Cisco Flex Stack switch stacking capability with 1 & 10 Gigabit connectivity, & Power over Ethernet Plus (Po E+) with the Cisco Catalyst 2960 switches offering fast Ethernet access connectivity & Po E capabilities. The Cisco Catalyst 2960-S series is fixed-configuration access switches designed for enterprise, midmarket, & branch office networks to provide lower total cost of ownership. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

The Cisco Catalyst 2960-S series switch is the leading layer 2 edge, providing enhanced ease of use, highly secure business operations, enhanced sustainability, & a borderless network experience. The Cisco Catalyst 2960-S series switch

Includes:: Cisco Flex Stack switch stacking capability with 1 & 10 Gigabit connectivity, & Power over Ethernet Plus (Po E+) with the Cisco Catalyst 2960 switches offering fast Ethernet access connectivity & Po E capabilities. The Cisco Catalyst 2960-S series is fixed-configuration access switches designed for enterprise, midmarket, & branch office networks to provide lower total cost of ownership.

...

Cisco Catalyst 2960-SF switches provide secure, reliable business operations with features that lower total cost of ownership. Features 48 ports of 10/100 Mbps Fast Ethernet Flex Stack technology, which simplifies operations, enabling a stack to be configured & managed as a single switch with 20 Gbps of stacking throughput. Flex Stack requires an optional module & is only available on LAN Base models Small Form-Factor Pluggable (SFP) Gigabit Ethernet uplinks IEEE 802.3at Power over Ethernet Plus (Po E+) support, which delivers up to 30 watts (W) per port USB (Universal Serial Bus) storage interface for file backup & transfer Flexible quality of service mechanisms to enable priority treatment of real-time traffic & critical business applications A variety of authentication methods to provide secure network access Cisco Catalyst Smart Operations features to simplify administration & lower total cost of ownership ...

Cisco Catalyst 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus & branch applications. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure & energy-efficient business operations with intelligent services & a range of advanced Cisco IOS Software features. ...

Cisco Catalyst 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus & branch applications. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure & energy-efficient business operations with intelligent services & a range of advanced Cisco IOS Software features. ...

Network security The Cisco Catalyst 2960-X series switches provide a range of security features to limit access to the network & mitigate threats. Redundancy & resiliency Cisco Catalyst 2960-X series switches offer a number of redundancy & resiliency features to prevent outages & help ensure that the network remains available. Application visibility Catalyst 2960-X series switches support Net Flow Lite, which enables IT teams to understand the mix of traffic on their network & identify anomalies by capturing & recording specific packet flows. Power management The 2960-X switches offer a range industry leading features for effective energy efficiency & energy management. Network management The Cisco Catalyst 2960-X series switches offer a superior CLI for detailed configuration & administration. 2960-X series switches are also supported in the full range of Cisco network management solutions. Intelligent Power over Ethernet Plus Cisco Catalyst 2960-X series switches support both IEEE 802.3af Power over Ethernet (Po E) & IEEE 802.3at Po E+ (up to 30W per port) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E/ Po E+ end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Main Specifications
- Product Description: Cisco Catalyst 2960X-24PSQ-L
- switch
- 24 ports
- Managed
- desktop, rack-mountable
- Device Type: Switch
- 24 ports
- Managed
- Enclosure Type: Desktop, rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 24 x 10/ 100/ 1000 (8 Po E+) + 2 x Gigabit SFP + 2 x 10/ 100/ 1000
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 110 W
- Performance: Switching capacity:216 Gbps Forwarding performance (64-byte packet size):71.4 Mpps
- Capacity: Active VLANs:1023
- Jumbo Frame Support: 9216 bytes
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, CLI
-

Features: Full duplex capability, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Syslog support, Diff Serv support, Broadcast Storm Control, IPv 6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (Qo S), MLD snooping, Dynamic ARP Inspection (DAI), Cisco Energy Wise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), fanless, Shaped Round Robin (SRR), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Management Information Base (MIB), Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (Co S), Diff Serv Code Point (DSCP) support
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
- Power: AC 120/ 230 V (50/ 60 Hz )
- Power Redundancy: Optional
- Dimensions: (Wx Dx H) 44.5 cm x 28 cm x 4.45 cm
- Weight: 5.8kg
- Manufacturer Warranty: Limited lifetime warranty

























...

Scalable The Cisco Catalyst 2960-X series switch is scalable & resilient. With Cisco Flex Stack-Plus stacking, which allows stacking of up to 8 switches & delivers 80 Gbps of stacking bandwidth, the Cisco Catalyst 2960-X enables ease of operation & management with a single configuration across the members of the stack. The Cisco Catalyst 2960-X series is resilient, with control plane redundancy across Flex Stack-Plus switches. This minimizes traffic disruption if any stack member fails. Smart The Cisco Catalyst 2960-X series enable intelligent access services, application visibility & control, and best-in-class energy management. Build for application visibility & control, these switches support Net Flow-Lite, which can be used to monitor, capture, and record traffic flows through the network. With industry-leading energy management capabilities such as Cisco Energy Wise to measure & control power usage, Energy Efficient Ethernet (EEE) & Switch & Downlink Hibernation modes to conserve power during periods of inactivity in the network, the Cisco Catalyst 2960-X with up to 80 percent energy savings is the greenest switch in the industry. Simple Cisco Catalyst 2960-X series switch is simple to deploy, manages, and troubleshoots. As part of the Cisco Unified Access portfolio, the Cisco Catalyst 2960-X series switch is fully integrated with Cisco Prime to offer simple operation from a central location. It can also be managed by Cisco Network Assistant, which features an intuitive GUI where users can easily apply common services across Cisco switches & routers. Main Specifications
- Product Description: Cisco Catalyst 2960X-24TD-L
- switch
- 24 ports
- Managed
- desktop, rack-mountable
- Device Type: Switch
- 24 ports
- Managed
- stackable
- Enclosure Type: Desktop, rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 24 x 10/ 100/ 1000 + 2 x SFP+
- Performance: Switching capacity:216 Gbps Forwarding performance (64-byte packet size):95.2 Mpps
- Capacity: Active VLANs:1023
- Jumbo Frame Support: 9216 bytes
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
- Features Full duplex capability, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Syslog support, Diff Serv support, Broadcast Storm Control, IPv 6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (Qo S), MLD snooping, Dynamic ARP Inspection (DAI), Cisco Energy Wise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Management Information Base (MIB), Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (Co S), Cisco Flex Stack Plus, Diff Serv Code Point (DSCP) support
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1AX
- Power: AC 120/ 230 V (50/ 60 Hz )
- Power Redundancy: Optional
- Dimensions: (Wx Dx H) 44.5 cm x 27.9 cm x 4.5 cm
- Weight: 4kg
- Manufacturer Warranty: Limited lifetime warranty






















...