The Lian Li O11 Dynamic Midi Tower manages to pair 8 mm thick steel with a tinted tempered glass side panel. However Lian Li takes this one step further & succeeds in kitting out the left chamber of the ATX case with a tempered glass front. The right part of the front consists of brushed aluminium & the front panel also hosts a USB (Universal Serial Bus) 3.1 Type-C port, two USB (Universal Serial Bus) 3.0 ports as well as the two obligatory audio jacks. The Lian Li O11 Dynamic Midi Tower can fit an E-ATX motherboard in the left chamber, a graphics card up to 420 mm in length as well as a CPU cooler that is up to 155 mm in height. When it comes to the installation of Ai O- or custom water cooling, the case offers the possibility of installing up to three 360 mm radiators at the same time: On in the top, one at the bottom & one next to the motherboard. To that end the motherboard tray has been angled to the right in comparison to earlier designs. Air inlets are located on the front right hand side of the case. These ensure that heat produced by high-end components is dissipated efficiently & effectively. Naturally the radiator slots can can also be kitted out with fans, each of which are capable of holding up to three 120 mm fans respectively. Several partly rubberised cable guides also come situated near where the motherboard would be in order to ensure neat & tidy cable management. The right hand chamber hosts hardware that produces little heat & therefore requires little additional cooling. The Lian Li O11 Dynamic Midi Tower standards slightly elevated on steel feet with rubberised standoffs to enable cool air to push its way through the bottom of the case which is equipped with dust filters. The chimney principle causes the warm air to rise upwards, whereupon it escapes through the cover which is also equipped with a dust filter. Two additional dust filters cover both perforated grids in the right side section. The elegant Lian Li O11 Dynamic Midi Tower is not merely a feast for the eyes that is easily capable of housing a great deal of gaming hardware, it is also especially suited for PC enthusiasts that want to create custom loops for cooling their hardware. SPACE FOR A SECOND POWER SUPPLY In terms of data storage devices, the case comes with an HDD cage which allows two 3, 5" HDDs to be installed. Both slots can be reached from the rear of the case, & they are concealed behind a perforated panel. Two 2, 5" SSDs can be mounted on the back of the motherboard tray. There are two additional 2, 5" brackets which are screwed to the bottom of the right side panel. In total, two 3, 5"- & four 2, 5" drives can be installed. The HDD cage can also be removed to make space for a second power supply which can also be installed vertically. ...

The Lian Li O11 Dynamic Midi Tower manages to pair 8 mm thick steel with a tinted tempered glass side panel. However Lian Li takes this one step further & succeeds in kitting out the left chamber of the ATX case with a tempered glass front. The right part of the front consists of brushed aluminium & the front panel also hosts a USB (Universal Serial Bus) 3.1 Type-C port, two USB (Universal Serial Bus) 3.0 ports as well as the two obligatory audio jacks. The Lian Li O11 Dynamic Midi Tower can fit an E-ATX motherboard in the left chamber, a graphics card up to 420 mm in length as well as a CPU cooler that is up to 155 mm in height. When it comes to the installation of Ai O- or custom water cooling, the case offers the possibility of installing up to three 360 mm radiators at the same time: On in the top, one at the bottom & one next to the motherboard. To that end the motherboard tray has been angled to the right in comparison to earlier designs. Air inlets are located on the front right hand side of the case. These ensure that heat produced by high-end components is dissipated efficiently & effectively. Naturally the radiator slots can can also be kitted out with fans, each of which are capable of holding up to three 120 mm fans respectively. Several partly rubberised cable guides also come situated near where the motherboard would be in order to ensure neat & tidy cable management. The right hand chamber hosts hardware that produces little heat & therefore requires little additional cooling. The Lian Li O11 Dynamic Midi Tower standards slightly elevated on steel feet with rubberised standoffs to enable cool air to push its way through the bottom of the case which is equipped with dust filters. The chimney principle causes the warm air to rise upwards, whereupon it escapes through the cover which is also equipped with a dust filter. Two additional dust filters cover both perforated grids in the right side section. The elegant Lian Li O11 Dynamic Midi Tower is not merely a feast for the eyes that is easily capable of housing a great deal of gaming hardware, it is also especially suited for PC enthusiasts that want to create custom loops for cooling their hardware. SPACE FOR A SECOND POWER SUPPLY In terms of data storage devices, the case comes with an HDD cage which allows two 3, 5" HDDs to be installed. Both slots can be reached from the rear of the case, & they are concealed behind a perforated panel. Two 2, 5" SSDs can be mounted on the back of the motherboard tray. There are two additional 2, 5" brackets which are screwed to the bottom of the right side panel. In total, two 3, 5"- & four 2, 5" drives can be installed. The HDD cage can also be removed to make space for a second power supply which can also be installed vertically. ...

Lian Li now adds a special Razer edition to their already highly regarded 0-11 Dynamic line. This premium Midi-Tower case is characterised by some striking RGB illumination effects & a prominent Razer logo that appears on the front panel. THE FEATURES OF THE LIAN LI O11 DYNAMIC RAZER EDITION AT A GLANCE Made from premium aluminium with tempered glass windows Compatible with E-ATX, ATX or Micro-ATX form factor motherboards Eye-catching RGB-LED illumination with Razer logo on front window Space for two power supplies Three RGB strips controlled by RAZER Synapse 3 THE FEATURES OF THE LIAN LI O11 DYNAMIC RAZER EDITION IN DETAIL Aesthetically the Lian Li O11 Dynamic Razer edition is extremely impressive. Being made from 0.8mm thick steel it has a suitably eye catching exterior. This is complemented by tinted tempered glass side panels, which are the perfect way to display your build's components. Lian Li have given the Razer edition fantastic RGB illumination. The case has three separate RGB strips, with one running parallel to the I/O panel & two on the base. These are compatible with RAZER Synapse 3, which enables users to assign amazing illumination effects. The Razor edition not only looks great but has a great feature set including the capacity to hold two power supplies. MANY OPTIONS FOR COOLING When it comes to the installation of Ai O- or custom water cooling, up to three 360mm radiators can be fitted at the same time. That's one on top, one at the bottom & one next to the motherboard. To that end the motherboard tray has been angled to the right in comparison to earlier designs. Air inlets are located on the front right hand side of the case. These ensure that heat produced by high-end components is dissipated efficiently & effectively. Naturally the radiator slots can can also be fitted with fans, each of which are capable of holding up to three 120mm fans respectively. Several partly rubberised cable guides also come situated near where the motherboard would be in order to ensure neat & tidy cable management. FLEXIBLE STORAGE CONFIGURATIONS In terms of data storage devices, two 2, 5" SSDs can be mounted on the back of the motherboard tray. There are two additional 2, 5" brackets which are screwed to the bottom of the right side panel. In total, two 3, 5"- & four 2, 5" drives can be installed. The HDD cage can also be removed to make space for a second power supply which can also be installed vertically. The Razer Edition also features an I/O panel that

Includes:: a useful USB (Universal Serial Bus) 3.1 Type-C on the front of the case.

...

With the TU150, Lian Li has once again succeeded in combining as many features as possible in a compact Mini-ITX case. But Lian Li didnt neglect the design aspect either. The Lian Li TU150 with its extremely compact

Dimensions of 20.3 x 37.5 x 31.2 cm is particularly easy to transport & therefore has a practical fold-out handle on the top. The side, front, side & top covers made from brushed aluminium are particularly stylish. Overview of the Lian Li TU150A Mini-ITX Case: Case made from brushed aluminium with steel frame Tinted tempered glass side panel Suitable for space-saving SFX or SFX-L power supplies Particularly compact

Dimensions & low weight Carry handle integrated in the top of the case Space for up to two 2.5-inch SSDs or one 3.5-inch HDD & one 2.5-inch SSD Space for 2.5 slot graphics cards up to 320 mm length, CPU cooler up to 165 mm I/O-Panel with 1x USB (Universal Serial Bus) 3.1 Type C, 2x USB (Universal Serial Bus) 3.0 & 1x Audio In/ Out Lian Li TU150A Mini-ITX: High Mobility Thanks to Compact Design Lian Li uses SFX power supplies instead of ATX form factor for the TU150A Mini-ITX case in order to create more space for powerful gaming hardware. The power supply is placed at the top behind the front of the case, with an internal extension cable leading to the rear slot for the power plug. The cable slots protrude to the left & are covered by a metal cover. Lian Li has also prioritised cable management to keep things tidy. There is space for said cables beneath the removable aluminium cover as well as behind the rear wall of the motherboard tray. On the tray itself, users will be pleased to note that Mini-ITX or Mini-DTX format motherboards can be installed. A total of three PCI slot brackets allow the installation of high-end graphics cards with a maximum length of 32 centimeters. Graphics cards can be up to 2.5 slots in width. If fans are installed on the base of the case, this height is reduced to two slots. The horizontal airflow design with the front & rear 120 mm fan slots means that all your installed hardware will be kept perfectly cool. Close-meshed air inlets are integrated into the front cover, these are made from brushed aluminium, & a removable dust filter is fitted in front of the fan slot. in addition, two more fans can be attached to the bottom, allowing waste heat produced by the graphics card to be fed to the outside. Despite the extremely compact design, CPU coolers with a maximum height of 165 millimeters can be accommodated in the Lian Li PC-TU150A. Those who prefer to opt for water cooling will be pleased to note that a 120 mm radiator can be mounted to the rear of the case. Two 2.5-inch storage devices can be installed in the Lian Li PC-TU150A in between the motherboard & the front & in the area above the motherboard. Instead, a 3.5-inch drive can be installed, with the requisite rubber decouplers included in the case. The I/O panel at the front of the top of the case has the obligatory audio connectors & power/reset buttons, a USB (Universal Serial Bus) 3.1 type C & two 3.0 type A ports.



...

The Lian Li TU150 Mini-ITX Case at a Glance: Brushed aluminium case with steel frame Tinted, tempered glass side panel Ultra compact

Dimensions & low weight Carry handle integrated into roof of case Space for up to two 2.5" SSDs or a 3.5" HDD & a 2.5" SSD Space for graphics cards up to 320 mm long, CPU coolers up to 165 mm I/O Panel with 1x USB (Universal Serial Bus) 3.1 Type C, 2x USB (Universal Serial Bus) 3.0 & 1x Audio In/ Out Lian Li TU150 Mini-ITX: High Mobility Thanks to Compact Design Lian Lis TU150 Mini-ITX case uses SFX power supplies instead of ATX power supplies, meaning that the case doesnt have to compromise on powerful gaming hardware. The power supply is installed in the top behind the front section, with an internal extension cable leading to the slot at the back for the plug. The connections for the cables protrude to the left & are cleverly concealed via a metal cover on the tempered glass panel. Lian Li has split up the cable management options as well, with space located beneath a removable aluminium cover as well as the space that has been reserved behind the back wall of the motherboard tray. The motherboard tray supports Mini-ITX- or Mini-DTX format motherboards. A total of three PCI slot brackets enable the installation of high-end graphics cards with a length of up to 32 cm. The horizontal airflow concept with the front & rear 120 mm fan slots helps to cool all installed hardware components sufficiently. Dense-mesh air inlets are integrated into the cases front cover, which made from brushed aluminium, & a removable dust filter is fitted in front of the fan slot. in addition, two more fans can be attached to the underside, which can help to guide excess heat from the graphics card to the outside. Despite the extremely compact design, CPU coolers with a maximum height of 165 millimeters can be accommodated in the Lian Li PC-TU150. Those set on water cooling can attach a 120 mm radiator instead of a fan if preferred. Two 2.5-inch drives can be installed in the Lian Li PC-TU150 between the motherboard & the front as well as in the roof above the mainboard. A 3.5-inch drive can alternatively be installed if needed, & the requisite rubber dampeners are included in the case. The I/O panel at the front of the top has the obligatory audio connectors & power/reset buttons, a USB (Universal Serial Bus) 3.1 type C & two 3.0 type A ports. Technical

Details: Dimensions: 203 x 312 x 375 mm (W x H x D)

Material: Aluminium, steel, tempered glass

Colour: Silver Weight: approx. 4.5kg Form factor: Mini-ITX, Mini-DTX Fan possible: 1x 120 mm (front), 1x 120 mm (back side), 2x 120 mm (floor) Pre-installed: none Dust filter: Front Drives: 1x 2.5 inch (internal, motherboard tray), 1x 3.5/2.5 inch (internal, cover) Expansion slots: 3 Power supply (optional): Standard SFX, /SFX-L I/O Panel: 1x USB (Universal Serial Bus) 3.1 Type C, 2x USB (Universal Serial Bus) 3.0 Type A, 1x per Audio In/ Out Maximum graphics card length: 320 mm Maximum CPU cooler

Height: 165 mm









...

TU150, Lian Li has once again succeeded in combining as many features as possible in a compact Mini-ITX case. But Lian Li didnt neglect the design aspect either. The Lian Li TU150 with its extremely compact

Dimensions of 20.3 x 37.5 x 31.2 cm is particularly easy to transport & therefore has a practical fold-out handle on the top. The side, front, side & top covers made from brushed aluminium are particularly stylish. Overview of the Lian Li TU150X Mini-ITX Case: Case made from brushed aluminium with steel frame Tinted tempered glass side panel Suitable for space-saving SFX or SFX-L power supplies Particularly compact

Dimensions & low weight Carry handle integrated in the top of the case Space for up to two 2.5-inch SSDs or one 3.5-inch HDD & one 2.5-inch SSD Space for 2.5 slot graphics cards up to 320 mm length, CPU cooler up to 165 mm I/O-Panel with 1x USB (Universal Serial Bus) 3.1 Type C, 2x USB (Universal Serial Bus) 3.0 & 1x Audio In/ Out Lian Li TU150X Mini-ITX: High Mobility Thanks to Compact Design Lian Li uses SFX power supplies instead of ATX form factor for the TU150X Mini-ITX case in order to create more space for powerful gaming hardware. The power supply is placed at the top behind the front of the case, with an internal extension cable leading to the rear slot for the power plug. The cable slots protrude to the left & are covered by a metal cover. Lian Li has also prioritised cable management to keep things tidy. There is space for said cables beneath the removable aluminium cover as well as behind the rear wall of the motherboard tray. On the tray itself, users will be pleased to note that Mini-ITX or Mini-DTX format motherboards can be installed. A total of three PCI slot brackets allow the installation of high-end graphics cards with a maximum length of 32 centimeters. Graphics cards can be up to 2.5 slots in width. If fans are installed on the base of the case, this height is reduced to two slots. The horizontal airflow design with the front & rear 120 mm fan slots means that all your installed hardware will be kept perfectly cool. Close-meshed air inlets are integrated into the front cover, these are made from brushed aluminium, & a removable dust filter is fitted in front of the fan slot. in addition, two more fans can be attached to the bottom, allowing waste heat produced by the graphics card to be fed to the outside. Despite the extremely compact design, CPU coolers with a maximum height of 165 millimeters can be accommodated in the Lian Li PC-TU150X. Those who prefer to opt for water cooling will be pleased to note that a 120 mm radiator can be mounted to the rear of the case. Two 2.5-inch storage devices can be installed in the Lian Li PC-TU150X in between the motherboard & the front & in the area above the motherboard. Instead, a 3.5-inch drive can be installed, with the requisite rubber decouplers included in the case. The I/O panel at the front of the top of the case has the obligatory audio connectors & power/reset buttons, a USB (Universal Serial Bus) 3.1 type C & two 3.0 type A ports.



...

The latest PCIe 4.0 supports transfer rates of 16GT/s bit rate. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offers great performance, & shows off the GPU at a great new angle Supports the O11D MINI, O11D & O11D XL ...

STRIMER 8-PIN RGB PCIE VGA POWER CABLE The Lian Li Strimer 8-pin PCIe RGB VGA power cable allows an impressive illumination of the graphics card power supply. Thanks to eight individually controllable RGB LEDs, each visible wire is illuminated individually, which enables particularly complex lighting effects. These can either be controlled via a compatible mainboard with a digital 3-pin RGB header or a compatible controller. The Lian Li Strimer 8-Pin PCIe RGB VGA Power Cable at a glance: Innovative extension cable with addressable RGB lighting Ten lighting effects Compatible with mainboards with digital 3-pin RGB header High quality white sleeve for particularly high colour fastness Stylish extension cable with digital RGB lighting The cable, developed in collaboration with OC-Champ der 8auer, is sheathed in white to guarantee maximum colour. The 6 + 2-pin PCIe-GPU extension cable connects the 8-pin cable of every commercially available ATX power supply unit with the 8-pin or 6-pin sockets of the graphics card. The lighting unit is fixed to the power cable with cable combs & consists of twelve transparent light guides that are illuminated by addressable RGB LEDs. If a compatible motherboard with a digital 3-pin RGB header is connected, the strimer can be conveniently controlled via ASUS Aura Sync software & synchronized with the lighting of other compatible components. Technical details Length: 300mm

Colour: White (Sleeves), Black (Connections) Power cable connections 2x 6 + 2-pin PCIe plug, 2x 8-pin PCIe socket

...

The Strimer Plus is the latest version of Lian Lis RGB LED illuminated power extension cable. The Strimer Plus integrates a standard 24-pin power extension cable with LED lighting strips (making a total of 120 LEDs available). As a result it is capable of displaying multiple colours & illumination effects. The Lian Li Strimer Plus 24-Pin RGB Motherboard Cable at a Glance: 24 pin power extension cable with addressable RGB illumination Compatible with standard 24-Pin connectors Bundled controller can cycle through 18 lighting effects Fully addressable via 3-Pin SV ARGB header The Lian Li Strimer Plus 24-Pin RGB Motherboard Cable in detail: The Strimer Plus is a great way to enhance your PC with RGB LED illumination. Lian Li have combined a standard 24 pin connector with a series of LED strips. The strips contain a total of 120 LEDs that, when illuminated, generates an array striking colours & effects. Since the Strimer Plus uses a 24 pin connector it is compatible with most motherboards & functions as a standard power extension cable (with & RGB twist). Fully Addressable RGB LED lighting Control the Strimer Pluss LEDs with the included controller or a compatible motherboard via its 3-pin 5v ARGB header. ...

The Strimer Plus is the latest version of Lian Lis RGB LED illuminated power extension cable. The Strimer Plus integrates a standard 8-pin power extension cable with LED lighting strips (making a total of 108 LEDs available). As a result it is capable of displaying multiple colours & illumination effects. The Lian Li Strimer Plus 8-Pin RGB Cable at a Glance: 8 pin power extension cable with addressable RGB illumination Compatible with standard 8-Pin connectors Fully addressable via included 3-Pin SV ARGB header The Lian Li Strimer Plus 8-Pin RGB Cable in detail: The Strimer Plus is a great way to enhance your PC with RGB LED illumination. Lian Li have combined a standard 8 pin connector with a series of LED strips. The strips contain a total of 108 LEDs that, when illuminated, generates an array striking colours & effects. Since the Strimer Plus uses a 8 pin connector it is compatible with most GPUs & functions as a standard power extension cable (with & RGB twist). Fully Addressable RGB LED lighting Control the Strimer Pluss LEDs with the included controller or a compatible motherboard via its 3-pin 5v ARGB header. ...