The Lian Li TU150 Mini-ITX Case at a Glance: Black, brushed aluminium case with steel frame Tinted, tempered glass side panel Ultra compact

Dimensions & low weight Carry handle integrated into roof of case Space for up to two 2.5" SSDs or a 3.5" HDD & a 2.5" SSD Space for graphics cards up to 320 mm long, CPU coolers up to 165 mm I/O Panel with 1x USB (Universal Serial Bus) 3.1 Type C, 2x USB (Universal Serial Bus) 3.0 & 1x Audio In/ Out Lian Li TU150 Mini-ITX: High Mobility Thanks to Compact Design Lian Lis TU150 Mini-ITX case uses SFX power supplies instead of ATX power supplies, meaning that the case doesnt have to compromise on powerful gaming hardware. The power supply is installed in the top behind the front section, with an internal extension cable leading to the slot at the back for the plug. The connections for the cables protrude to the left & are cleverly concealed via a metal cover on the tempered glass panel. Lian Li has split up the cable management options as well, with space located beneath a removable aluminium cover as well as the space that has been reserved behind the back wall of the motherboard tray. The motherboard tray supports Mini-ITX- or Mini-DTX format motherboards. A total of three PCI slot brackets enable the installation of high-end graphics cards with a length of up to 32 cm. The horizontal airflow concept with the front & rear 120 mm fan slots helps to cool all installed hardware components sufficiently. Dense-mesh air inlets are integrated into the cases front cover, which made from brushed aluminium, & a removable dust filter is fitted in front of the fan slot. in addition, two more fans can be attached to the underside, which can help to guide excess heat from the graphics card to the outside. Despite the extremely compact design, CPU coolers with a maximum height of 165 millimetres can be accommodated in the Lian Li PC-TU150. Those set on water cooling can attach a 120 mm radiator instead of a fan if preferred. Two 2.5-inch drives can be installed in the Lian Li PC-TU150 between the motherboard & the front as well as in the roof above the mainboard. A 3.5-inch drive can alternatively be installed if needed, & the requisite rubber dampeners are included in the case. The I/O panel at the front of the top has the obligatory audio connectors & power/reset buttons, a USB (Universal Serial Bus) 3.1 type C & two 3.0 type A ports.

...

TU150, Lian Li has once again succeeded in combining as many features as possible in a compact Mini-ITX case. But Lian Li didnt neglect the design aspect either. The Lian Li TU150 with its extremely compact

Dimensions of 20.3 x 37.5 x 31.2 cm is particularly easy to transport & therefore has a practical fold-out handle on the top. The side, front, side & top covers made from brushed aluminium are particularly stylish. Overview of the Lian Li TU150X Mini-ITX Case: Case made from brushed aluminium with steel frame Tinted tempered glass side panel Suitable for space-saving SFX or SFX-L power supplies Particularly compact

Dimensions & low weight Carry handle integrated in the top of the case Space for up to two 2.5-inch SSDs or one 3.5-inch HDD & one 2.5-inch SSD Space for 2.5 slot graphics cards up to 320 mm length, CPU cooler up to 165 mm I/O-Panel with 1x USB (Universal Serial Bus) 3.1 Type C, 2x USB (Universal Serial Bus) 3.0 & 1x Audio In/ Out Lian Li TU150X Mini-ITX: High Mobility Thanks to Compact Design Lian Li uses SFX power supplies instead of ATX form factor for the TU150X Mini-ITX case in order to create more space for powerful gaming hardware. The power supply is placed at the top behind the front of the case, with an internal extension cable leading to the rear slot for the power plug. The cable slots protrude to the left & are covered by a metal cover. Lian Li has also prioritised cable management to keep things tidy. There is space for said cables beneath the removable aluminium cover as well as behind the rear wall of the motherboard tray. On the tray itself, users will be pleased to note that Mini-ITX or Mini-DTX format motherboards can be installed. A total of three PCI slot brackets allow the installation of high-end graphics cards with a maximum length of 32 centimeters. Graphics cards can be up to 2.5 slots in width. If fans are installed on the base of the case, this height is reduced to two slots. The horizontal airflow design with the front & rear 120 mm fan slots means that all your installed hardware will be kept perfectly cool. Close-meshed air inlets are integrated into the front cover, these are made from brushed aluminium, & a removable dust filter is fitted in front of the fan slot. in addition, two more fans can be attached to the bottom, allowing waste heat produced by the graphics card to be fed to the outside. Despite the extremely compact design, CPU coolers with a maximum height of 165 millimeters can be accommodated in the Lian Li PC-TU150X. Those who prefer to opt for water cooling will be pleased to note that a 120 mm radiator can be mounted to the rear of the case. Two 2.5-inch storage devices can be installed in the Lian Li PC-TU150X in between the motherboard & the front & in the area above the motherboard. Instead, a 3.5-inch drive can be installed, with the requisite rubber decouplers included in the case. The I/O panel at the front of the top of the case has the obligatory audio connectors & power/reset buttons, a USB (Universal Serial Bus) 3.1 type C & two 3.0 type A ports.



...

The latest PCIe 4.0 supports transfer rates of 16GT/s bit rate. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offers great performance, & shows off the GPU at a great new angle Supports the O11D MINI, O11D & O11D XL ...

STRIMER 8-PIN RGB PCIE VGA POWER CABLE The Lian Li Strimer 8-pin PCIe RGB VGA power cable allows an impressive illumination of the graphics card power supply. Thanks to eight individually controllable RGB LEDs, each visible wire is illuminated individually, which enables particularly complex lighting effects. These can either be controlled via a compatible mainboard with a digital 3-pin RGB header or a compatible controller. The Lian Li Strimer 8-Pin PCIe RGB VGA Power Cable at a glance: Innovative extension cable with addressable RGB lighting Ten lighting effects Compatible with mainboards with digital 3-pin RGB header High quality white sleeve for particularly high colour fastness Stylish extension cable with digital RGB lighting The cable, developed in collaboration with OC-Champ der 8auer, is sheathed in white to guarantee maximum colour. The 6 + 2-pin PCIe-GPU extension cable connects the 8-pin cable of every commercially available ATX power supply unit with the 8-pin or 6-pin sockets of the graphics card. The lighting unit is fixed to the power cable with cable combs & consists of twelve transparent light guides that are illuminated by addressable RGB LEDs. If a compatible motherboard with a digital 3-pin RGB header is connected, the strimer can be conveniently controlled via ASUS Aura Sync software & synchronized with the lighting of other compatible components. Technical details Length: 300mm

Colour: White (Sleeves), Black (Connections) Power cable connections 2x 6 + 2-pin PCIe plug, 2x 8-pin PCIe socket

...

The Strimer Plus is the latest version of Lian Lis RGB LED illuminated power extension cable. The Strimer Plus integrates a standard 24-pin power extension cable with LED lighting strips (making a total of 120 LEDs available). As a result it is capable of displaying multiple colours & illumination effects. The Lian Li Strimer Plus 24-Pin RGB Motherboard Cable at a Glance: 24 pin power extension cable with addressable RGB illumination Compatible with standard 24-Pin connectors Bundled controller can cycle through 18 lighting effects Fully addressable via 3-Pin SV ARGB header The Lian Li Strimer Plus 24-Pin RGB Motherboard Cable in detail: The Strimer Plus is a great way to enhance your PC with RGB LED illumination. Lian Li have combined a standard 24 pin connector with a series of LED strips. The strips contain a total of 120 LEDs that, when illuminated, generates an array striking colours & effects. Since the Strimer Plus uses a 24 pin connector it is compatible with most motherboards & functions as a standard power extension cable (with & RGB twist). Fully Addressable RGB LED lighting Control the Strimer Pluss LEDs with the included controller or a compatible motherboard via its 3-pin 5v ARGB header. ...

STRIMER RGB 24 PIN MOTHERBOARD CABLE The Lian Li Strimer combines an industry standard 24 pin power extension cable with an RGB LED lighting module. It is a unique product that has been designed by Lian Li in collaboration with famous PC modder der 8auer. Unlike any other cable extender currently on the market, the Li Strimer features fully addressable RGB lighting strips. Each wire can be individually controlled & set to a unique colour. Lian Li have developed a multitude of unique lighting modes for the Strimer but it can also be addressed directly utilising your motherboard’s 3 pin 5V RGB header. This makes the Lian Li Strimer perfect for the modding enthusiast looking the latest accessory. THE LIAN LI STRIMER 24-PIN RGB MOTHERBOARD CABLE AT A GLANCE Innovative extension cable with addressable RGB lighting

Includes:: controller with 10 lighting effects Compatible with motherboards that have a digital 3-pin RGB header Premium sleeving in white for high colour fidelity STYLISH EXTENSION CABLE WITH DIGITAL RGB LIGHTING Created in cooperation with professional overclocker der 8auer, the Lian Li Strimer offers new possibilities in RGB illumination. Never before has there been a way to illuminate your PSU cable! Lian Li created this innovation through intelligent engineering. The Strimer is constructed in two layers. The bottom layer is a standard 24 pin power extension cable, that works with virtually any motherboard while the top layer consists of twelve individually controllable RGB lighting cables. This means the Strimer is both a fully functional power extension cable & can create striking lighting effects. The Strimer’s design has also been carefully considered. The bottom layer is braided & has a soft white colour which compliments the top layer when illuminated. The top layer neatly clips to the bottom via cable combs, which is particularly useful when setting up the Strimer inside your case. Lighting effects can be controlled via a bundled PCIe bracket that connects to the Strimer. Lian Li have included several pre-set modes & these are accessible with a press of a button on the PCIe bracket. Alternatively the Strimer can be synced with other lighting components by attaching it directly to a compatible motherboard. Lian Li have made an innovative RGB LED lighting accessory thats great for someone looking for something different. Technical Details Length: 200 mm

Colour: White (Sleeves), Black (connector) Power Cable Connections: 1x 24-Pin ATX Connector 1x 24-Pin ATX Connector Controller Connectors: 1x SATA Power supply 1x 3-Pin RGB (digital)



...

A great video specific triPod from Libec. The bigger other to the very popular TH650 this triPod has an advanced fluid head with a unique two position counterbalance making it ideal to be used with front heavy cameras as well as normal cameras The removable camera quick release plate is fitted with a sliding screw for fine adjustment & is made from extraordinarily strong magnesium alloy. ...

Liberon Abrasive Belt Cleaner is designed to remove softwood sap & resin from abrasive belts & discs to help extend their life. It also removes dust build up in the grit & keeps the sanding grit sharp. Made from a specially formulated rubber the Belt Cleaner is long lasting & easy to use. It helps to increase the longevity of the belt. The LIBLBC abrasive belt cleaner has the following dimensions: Length: 223 mm.

Width: 38 mm.

Height: 38 mm.



...

Liberon Apron is a traditional 100% pure cotton cabinetmakers apron. With large front pocket & long tie ribbons one size fits all. Performance: 100% pure cotton, machine washable, large front pocket. Protects clothing from wood dyes & sanding dust. ...

Liberon Liquid Beeswax is ideal for nourishing absorbent woods such as pine & oak especially unsealed. It is particularly suitable for large & very dry surfaces such as beams, floors, doors & staircases. Performance: Traditional wax that nourishes wood. Feeds wood & protects against dryness. Gives an authentic finish. ideal to be used on large surfaces. Suitable for hard & softwoods. Ensure the surface is clean, dry & free from dust. Precautions Not suitable for high water areas such as kitchens & bathrooms. In cold weather wax may thicken. To soften remove cap & stand in a bowl of hot water for 5 minutes, replace the cap & shake. Repeat if necessary: Finish
- Clear.
...