For those who want a compact system with substantial airflow, look no further than the Kolink Citadel Mesh Micro-ATX Case. Featuring a full mesh front panel with a pair of pre-installed 12cm PWM fans, the Kolink Citadel Mesh sports both an attractive design & a feature rich chassis. With a hinged tempered glass side panel, your components will be on full display, allowing some truly stunning results. Features Full mesh front panel with 2 x pre-installed 12cm PWM fans Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 1x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 345 mm supported, CPU coolers up to 190 mm, PSUs up to 200 mm Kolink Citadel Mesh: Airflow meets Performance The Kolink Citadel Mesh comes with a pair of 12cm PWM fans installed as standard. These fans offer both good performance & low noise, & can be automatically speed controlled through connecting them to your motherboards PWM headers. The full mesh front panel also contributes to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140 mm fans in the roof, & one 120/140 mm fan to the rear. The roof is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. The Kolink Citadel Mesh: Ready for Enthusiasts The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19 cm tall. in addition, the I/O panel located at the front possesses an USB (Universal Serial Bus) 2.0 port as well as a pair of USB (Universal Serial Bus) 3.0 Type-A ports
...

For those who want a compact system with substantial airflow & ARGB lighting, look no further than the Kolink Citadel Mesh RGB Micro-ATX Case. Featuring a full mesh front panel with a pair 120mm ARGB LED PWM fans, the Kolink Citadel Mesh has a range of lighting effects & modes, controlled using the supplied remote or via compatible motherboard software. With a hinged tempered glass side panel, your components & lighting will be on full display, allowing some truly stunning results. Features Full mesh front panel with 2 x pre-installed ARGB LED PWM Fans Pre-installed rear 120mm PWM fan with digitally addressable RGB lighting RGB controller hub with remote control allowing various lighting modes & effects Option to sync to motherboard software provided as standard Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 1x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 345 mm supported, CPU coolers up to 190 mm, PSUs up to 200 mm Kolink Citadel Mesh RGB: Excellent Airflow with attractive lighting The Kolink Citadel Mesh RGB comes with three 120mm ARGB PWM fans installed as standard. The addressable RGB fans can be controlled via the supplied RGB controller & remote, or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. These fans offer good performance, attractive lighting effects & can even be automatically speed controlled through connecting them to your motherboards PWM headers. The full mesh front panel also contributes to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140 mm fans in the roof, which is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. The Kolink Citadel Mesh RGB: Hardware capable The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19 cm tall. in addition, the I/O panel located at the front possesses two USB (Universal Serial Bus) 2.0 ports as well as a pair of USB (Universal Serial Bus) 3.0 Type-A ports.
...

For those who want a compact system with substantial airflow & ARGB lighting, look no further than the Kolink Citadel Mesh RGB Micro-ATX Case. Featuring a full mesh front panel with a pair 120mm ARGB LED PWM fans, the Kolink Citadel Mesh has a range of lighting effects & modes, controlled using the supplied remote or via compatible motherboard software. With a hinged tempered glass side panel, your components & lighting will be on full display, allowing some truly stunning results. THE FEATURES OF THE KOLINK CITADEL MESH RGB AT A GLANCE Full mesh front panel with 2 x pre-installed ARGB LED PWM Fans Pre-installed rear 120mm PWM fan with digitally addressable RGB lighting RGB controller hub with remote control allowing various lighting modes & effects Option to sync to motherboard software provided as standard Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 1x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 345 mm supported, CPU coolers up to 190 mm, PSUs up to 200 mm KOLINK CITADEL MESH RGB: EXCELLENT AIRFLOW WITH ATTRACTIVE LIGHTING The Kolink Citadel Mesh RGB comes with three 120mm ARGB PWM fans installed as standard. The addressable RGB fans can be controlled via the supplied RGB controller & remote, or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. These fans offer good performance, attractive lighting effects & can even be automatically speed controlled through connecting them to your motherboards PWM headers. The full mesh front panel also contributes to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140 mm fans in the roof, which is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. THE KOLINK CITADEL MESH RGB: HARDWARE CAPABLE The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19 cm tall. in addition, the I/O panel located at the front possesses two USB (Universal Serial Bus) 2.0 ports as well as a pair of USB (Universal Serial Bus) 3.0 Type-A ports.
...

The Kolink Citadel Micro-ATX case has a reserved & ascetic exterior that conceals a surprising amount of space & features within. In the front & on the roof, despite the diminutive form factor, users will be pleased to know that radiators up to 240 mm are supported. The left side panel is made from tinted tempered glass & this helps give the compact case an attractive modern look. The sleek plastic front has the appearance of brushed aluminium & this complements the overall aesthetic of the Kolink Citadel Micro-ATX case nicely. The open roof of the case has a dust filter below which is located a stylish honeycomb-style mesh. The Kolink Citadel Micro-ATX case is ideal for all those that want the most powerful hardware possible while looking good at the same time. The Kolink Citadel Micro-ATX Case at a Glance: Sleek design with tempered glass side panel & roof with mesh Space for a 240 mm radiator in the front & roof Space for up to 350 mm long graphics cards & CPU coolers up to 160 mm Two pre-installed 120 mm fans in the front & rear Dust filters in the roof & base value-Oriented Micro-ATX Case from Kolink for Gamers The Kolink Citadel is a great value Micro-ATX case for gamers. It supports graphics cards up to 35 cm in length. In order to raise the overall gaming potential of the case yet further, the front of the case also supports a 240 mm radiator of an AIO watercooler, thereby keeping the CPU as cooler as possible during intense gaming sessions. CPU tower-style coolers can be up to 160mm tall. Despite the front being made from plastic, it enjoys the look of brushed aluminium & this contributes significantly to the overall reserved & minimalist aesthetic of the case. A side-facing fan inlet enables excellent airflow, with the fine honeycomb mesh also adding a certain flair. In terms of fans, the front allows for up to three 120 mm- or two 140 mm fans, a 120 mm fan does come pre-installed however. The roof fits two 120 mm fans, & the rear

Includes:: an additional 120mm pre-installed fan.

Includes:: PSU Shroud & Tempered Glass Side Panel The back of the motherboard tray allows for two 2, 5" SSDs to be installed. Beneath the PSU shroud however, the case provides a drive cage for holding two 3, 5" HDDs, & with the requisite spacers (not included) users can install 2, 5" drives instead. A PSU shroud & plenty of space for the cable management combines to make the interior look remarkably tidy, & given the tempered glass side panel, this is certainly appreciated. The I/O panel in the roof is equipped with a USB (Universal Serial Bus) 3.0- & two USB (Universal Serial Bus) 2.0 ports alongside two audio jacks. Technical

Details: Dimensions: 200 x 412 x 396 mm (W x H x D)

Material: Steel (Body), plastic (Front) Weight: approx. 4, 6kg

Colour: Black Form factor: Micro-ATX, Mini-ITX Total possible fans: 3x 120 mm / 2x 140 mm (front) 2x 120 mm (roof) 1x 120 mm (rear) Pre-installed: 1x 120 mm (rear, 3-pin, 1.200 RPM) 1x 120 mm (front, 3-pin, 1.200 RPM) Filter: Bottom (removable) Radiator Mountings: 1x 120 mm (Rear) 1x 240 / 140 mm (Front) 1x max. 240 mm (roof) Drive bays: 2x 2, 5 / 3, 5" max. (internal) 2x 2, 5" max. (internal) PSU: 1x Standard ATX (optional) Expansion slots: 4 I/O Panel: 1x USB (Universal Serial Bus) 3.0 1x USB (Universal Serial Bus) 2.0 2x 3, 5 mm jack (1x Audio-In / -Out) Max GPU length: 350 mm Max CPU cooler

Height: 160 mm











...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. The 400 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 348W & 29A on the +12V rail while providing 80W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & a 6+2 PCIe pin connector for dedicated graphics cards. Three SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. Main Features 348W & 29A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 1x PCIe 6+2-pin, 3x SATA, 2x Molex ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. THE KOLINK CLASSIC POWER 600W POWER SUPPLY AT A GLANCE: 546W & 45.5A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 2x 6+2-pin, 4x SATA, 2x Molex KOLINK CLASSIC POWER: FULL PERFORMANCE & HIGH EFFICIENCY The 600 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 546W & 45.5A on the +12V rail while providing 100W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & two 6+2 pin connectors for dedicated graphics cards. Four SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. THE KOLINK CLASSIC POWER 700W POWER SUPPLY AT A GLANCE: 648W & 54A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 4x 6+2-pin, 6x SATA & 2x Molex KOLINK CLASSIC POWER: FULL PERFORMANCE & HIGH EFFICIENCY The 700 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 648W & 54A on the +12V rail while providing 110W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & four 6+2 pin connectors for dedicated graphics cards. Six SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. ...

The Kolink Core series are a range of high quality power supplies that offer great value for your money. This new ARGB update ...

The Kolink Core series are a range of high quality power supplies that offer great value for your money. This new ARGB update ...

The Kolink Core series are a range of high quality power supplies that offer great value for your money. This new ARGB update ...