The Kolink Citadel Micro-ATX case has a reserved & ascetic exterior that conceals a surprising amount of space & features within. In the front & on the roof, despite the diminutive form factor, users will be pleased to know that radiators up to 240 mm are supported. The left side panel is made from tinted tempered glass & this helps give the compact case an attractive modern look. The sleek plastic front has the appearance of brushed aluminium & this complements the overall aesthetic of the Kolink Citadel Micro-ATX case nicely. The open roof of the case has a dust filter below which is located a stylish honeycomb-style mesh. The Kolink Citadel Micro-ATX case is ideal for all those that want the most powerful hardware possible while looking good at the same time. The Kolink Citadel Micro-ATX Case at a Glance: Sleek design with tempered glass side panel & roof with mesh Space for a 240 mm radiator in the front & roof Space for up to 350 mm long graphics cards & CPU coolers up to 160 mm Two pre-installed 120 mm fans in the front & rear Dust filters in the roof & base value-Oriented Micro-ATX Case from Kolink for Gamers The Kolink Citadel is a great value Micro-ATX case for gamers. It supports graphics cards up to 35 cm in length. In order to raise the overall gaming potential of the case yet further, the front of the case also supports a 240 mm radiator of an AIO watercooler, thereby keeping the CPU as cooler as possible during intense gaming sessions. CPU tower-style coolers can be up to 160mm tall. Despite the front being made from plastic, it enjoys the look of brushed aluminium & this contributes significantly to the overall reserved & minimalist aesthetic of the case. A side-facing fan inlet enables excellent airflow, with the fine honeycomb mesh also adding a certain flair. In terms of fans, the front allows for up to three 120 mm- or two 140 mm fans, a 120 mm fan does come pre-installed however. The roof fits two 120 mm fans, & the rear

Includes:: an additional 120mm pre-installed fan.

Includes:: PSU Shroud & Tempered Glass Side Panel The back of the motherboard tray allows for two 2, 5" SSDs to be installed. Beneath the PSU shroud however, the case provides a drive cage for holding two 3, 5" HDDs, & with the requisite spacers (not included) users can install 2, 5" drives instead. A PSU shroud & plenty of space for the cable management combines to make the interior look remarkably tidy, & given the tempered glass side panel, this is certainly appreciated. The I/O panel in the roof is equipped with a USB (Universal Serial Bus) 3.0- & two USB (Universal Serial Bus) 2.0 ports alongside two audio jacks. Technical

Details: Dimensions: 200 x 412 x 396 mm (W x H x D)

Material: Steel (Body), plastic (Front) Weight: approx. 4, 6kg

Colour: Black Form factor: Micro-ATX, Mini-ITX Total possible fans: 3x 120 mm / 2x 140 mm (front) 2x 120 mm (roof) 1x 120 mm (rear) Pre-installed: 1x 120 mm (rear, 3-pin, 1.200 RPM) 1x 120 mm (front, 3-pin, 1.200 RPM) Filter: Bottom (removable) Radiator Mountings: 1x 120 mm (Rear) 1x 240 / 140 mm (Front) 1x max. 240 mm (roof) Drive bays: 2x 2, 5 / 3, 5" max. (internal) 2x 2, 5" max. (internal) PSU: 1x Standard ATX (optional) Expansion slots: 4 I/O Panel: 1x USB (Universal Serial Bus) 3.0 1x USB (Universal Serial Bus) 2.0 2x 3, 5 mm jack (1x Audio-In / -Out) Max GPU length: 350 mm Max CPU cooler

Height: 160 mm











...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. The 400 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 348W & 29A on the +12V rail while providing 80W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & a 6+2 PCIe pin connector for dedicated graphics cards. Three SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. Main Features 348W & 29A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 1x PCIe 6+2-pin, 3x SATA, 2x Molex ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. Features 444W & 37A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 2x 6+2-pin, 4x SATA, 2x Molex Kolink Classic Power: Full performance & high efficiency The 500 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 444W & 37A on the +12V rail while providing 100W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & two 6+2 pin connectors for dedicated graphics cards. Four SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. THE KOLINK CLASSIC POWER 600W POWER SUPPLY AT A GLANCE: 546W & 45.5A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 2x 6+2-pin, 4x SATA, 2x Molex KOLINK CLASSIC POWER: FULL PERFORMANCE & HIGH EFFICIENCY The 600 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 546W & 45.5A on the +12V rail while providing 100W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & two 6+2 pin connectors for dedicated graphics cards. Four SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. THE KOLINK CLASSIC POWER 700W POWER SUPPLY AT A GLANCE: 648W & 54A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 4x 6+2-pin, 6x SATA & 2x Molex KOLINK CLASSIC POWER: FULL PERFORMANCE & HIGH EFFICIENCY The 700 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 648W & 54A on the +12V rail while providing 110W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & four 6+2 pin connectors for dedicated graphics cards. Six SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. ...

The Kolink Core series are a range of high quality power supplies that offer great value for your money. This new ARGB update ...

The Kolink Core series are a range of high quality power supplies that offer great value for your money. This new ARGB update ...

In addition to numerous low-priced yet highly regarded chassis & an extensive range of accessories, the Kolink brand already offers long power supplies of various performance classes. After the successful entry into the European market for PC power supplies at the end of 2015, Kolink is now working with the Core series & shows that particularly inexpensive power supplies are possible without the customer having to forego basic quality features. A Kolink-Core power supply delivers everything that is really important, while less important features are consistently saved. So the Cores are technically solid, but still hardly more expensive than the all-but-no-name products. For the entry-level series, Kolink uses, for example, the 80 Plus certificate, which guarantees efficiency of more than 80 percent from 20 percent utilization at 115 volts. In the European 230-volt network, all models of the Core Series meet the requirements of EU Regulation No. 617/2013. Since July 2014, this has presumably required a minimum efficiency of 82 to 85 percent for all power supplies used in complete PCs. Because the mandatory requirements for standby power consumption & standby efficiency are also met, Kolink core power supplies are therefore a low-cost but right-safe choice for all integrators & system houses. The fact that Kolink is familiar with its entry-level products is also evident in the equipment with connections. The 700-watt model offered here has a 4 + 4-pin EPS12V connector for the processor as well as a total of four 6 + 2-pin connectors for the graphics card in addition to the 20 + 4-pin ATX connector for the mainboard. Five SATA & three Molex connectors are available for the other components. The Kolink Core 700 Watt can therefore prove its performance at any time in real systems. Even gaming systems with SLI & Crossfire tapes from high-end graphics cards are supplied without problems by this low-cost power supply. It is also worth noting that Kolink
- unfortunately as part of the minority of the power supply brands
- carries out both product design & final quality control completely in Europe before delivery to specialist retailers, system integrators & end customers. Despite the aggressive prices, these products are full-fledged retail products for the needs of European customers, whose quality is ensured by manufacturers at all times. A power supply must ultimately function reliably in the end, so that the computer runs smoothly. Saving on the other hand is something that many users in this price class do not value: That Kolink delivers all power supplies without a power cable which protects the environment & saves costs, whereas most potential buyers already have cables already at home. Kolink also has a purist style in terms of optics, the cable strings are held together by convenient cable ties instead of elaborate sleeves. The surface is simply black lacquered, so the power supply in the PC hardly noticeable. In short, if you only have a tight budget, the core power supply is currently the best choice.

...

In addition to numerous low-priced yet highly regarded chassis & an extensive range of accessories, the Kolink brand already offers long power supplies of various performance classes. After the successful entry into the European market for PC power supplies at the end of 2015, Kolink is now working with the Core series & shows that particularly inexpensive power supplies are possible without the customer having to forego basic quality features. A Kolink-Core power supply delivers everything that is really important, while less important features are consistently saved. So the Cores are technically solid, but still hardly more expensive than the all-but-no-name products. For the entry-level series, Kolink uses, for example, the 80 Plus certificate, which guarantees efficiency of more than 80 percent from 20 percent utilization at 115 volts. In the European 230-volt network, all models of the Core Series meet the requirements of EU Regulation No. 617/2013. Since July 2014, this has presumably required a minimum efficiency of 82 to 85 percent for all power supplies used in complete PCs. Because the mandatory requirements for standby power consumption & standby efficiency are also met, Kolink core power supplies are therefore a low-cost but right-safe choice for all integrators & system houses. The fact that Kolink is familiar with its entry-level products is also evident in the equipment with connections. The 300-watt model for office computers & economical multimedia systems offered here already has a 4 + 4-pin EPS12V connector for the processor as well as a 6-pin ATX connector for the mainboard + 2-pin connector for graphics card. Four SATA & two Molex connectors are available for the other components. The Kolink Core 400 Watt can therefore prove its performance at any time in real systems. Even gaming systems with mid-range & performance graphics cards are supplied without problems. It is also worth noting that Kolink
- unfortunately as part of the minority of the power supply brands
- carries out both product design & final quality control completely in Europe before delivery to specialist retailers, system integrators & end customers. Despite the aggressive prices, these products are full-fledged retail products for the needs of European customers, whose quality is ensured by manufacturers at all times. A power supply must ultimately function reliably in the end, so that the computer runs smoothly. Saving on the other hand is something that many users in this price class do not value: That Kolink delivers all power supplies without a power cable which protects the environment & saves costs, whereas most potential buyers already have cables already at home. Kolink also has a purist style in terms of optics, the cable strings are held together by convenient cable ties instead of elaborate sleeves. The surface is simply black lacquered, so the power supply in the PC hardly noticeable. In short, if you only have a tight budget, the core power supply is currently the best choice. Technical

Details: Dimensions: 140 x 86 x 150 mm (W x H x D) Fan: 120 mm (automatic control) Efficiency: at least 80 percent at 50/20/100 percent load, 80 Plus certified Active PFC (0.9) Form Factor: ATX12V 2.3 Rated power: 400 W + 3.3V: 13A "" + 5V: 13A + 3.3V / + 5V: 90W + 12V: 276W / 23A -12V: 0.5A / 6W + 5 Vsb: 2.5 A / 12.5 W Connections (fixed): 1x 20 + 4-pin 1x 4 + 4-pin (CPU / ATX12V / EPS12V) 1x 6 + 2-pin PCIe 4x SATA 2x 4-pin Molex Warranty: 2yr *does not come with kettle lead



...

n addition to numerous low-priced yet highly regarded chassis & an extensive range of accessories, the Kolink brand already offers long power supplies of various performance classes. After the successful entry into the European market for PC power supplies at the end of 2015, Kolink is now working with the Core series & shows that particularly inexpensive power supplies are possible without the customer having to forego basic quality features. A Kolink-Core power supply delivers everything that is really important, while less important features are consistently saved. So the Cores are technically solid, but still hardly more expensive than the all-but-no-name products. For the entry-level series, Kolink uses, for example, the 80 Plus certificate, which guarantees efficiency of more than 80 percent from 20 percent utilization at 115 volts. In the European 230-volt network, all models of the Core Series meet the requirements of EU Regulation No. 617/2013. Since July 2014, this has presumably required a minimum efficiency of 82 to 85 percent for all power supplies used in complete PCs. Because the mandatory requirements for standby power consumption & standby efficiency are also met, Kolink core power supplies are therefore a low-cost but right-safe choice for all integrators & system houses. The fact that Kolink is familiar with its entry-level products is also evident in the equipment with connections. The 400-watt model for office computers & economical multimedia systems offered here already has a 4 + 4-pin EPS12V connector for the processor as well as a 6-pin ATX connector for the mainboard + 2-pin connector for graphics card. Four SATA & two Molex connectors are available for the other components. The Kolink Core 400 Watt can therefore prove its performance at any time in real systems. Even gaming systems with mid-range & performance graphics cards are supplied without problems. It is also worth noting that Kolink
- unfortunately as part of the minority of the power supply brands
- carries out both product design & final quality control completely in Europe before delivery to specialist retailers, system integrators & end customers. Despite the aggressive prices, these products are full-fledged retail products for the needs of European customers, whose quality is ensured by manufacturers at all times. A power supply must ultimately function reliably in the end, so that the computer runs smoothly. Saving on the other hand is something that many users in this price class do not value: That Kolink delivers all power supplies without a power cable which protects the environment & saves costs, whereas most potential buyers already have cables already at home. Kolink also has a purist style in terms of optics, the cable strings are held together by convenient cable ties instead of elaborate sleeves. The surface is simply black lacquered, so the power supply in the PC hardly noticeable. In short, if you only have a tight budget, the core power supply is currently the best choice. Technical

Details: Dimensions: 140 x 86 x 150 mm (W x H x D) Fan: 120 mm (automatic control) Efficiency: at least 80 percent at 50/20/100 percent load, 80 Plus certified Active PFC (0.9) Form Factor: ATX12V 2.3 Rated power: 400 W + 3.3V: 13A "" + 5V: 13A + 3.3V / + 5V: 90W + 12V: 276W / 23A -12V: 0.5A / 6W + 5 Vsb: 2.5 A / 12.5 W Connections (fixed): 1x 20 + 4-pin 1x 4 + 4-pin (CPU / ATX12V / EPS12V) 1x 6 + 2-pin PCIe 4x SATA 2x 4-pin Molex Warranty: 2yr *does not come with kettle lead



...