Noble look & spacious interior: The Midi-Tower Kolink Bastion combines functionality with a restrained but chic exterior. Beneath the tempered glass side, the Midi-Tower is decorated with an addressable RGB-LED strip. Its colours shine out from behind an opaque acrylic glass strip. The colour scheme is accentuated by a rear fan with digitally addressable RGB-LEDs. The lighting can be controlled via a switch on the I/O panel, or by compatible addressable RGB motherboards using the 3-Pin connector provided. Furthermore, the spacious interior is more than capable of supporting lot of powerful hardware. A fine mesh with integrated dust filter on the top is also provided, ensuring your components are supplied with fresh air as well as kept dust-free. A STYLISH HIGH-END CASE FROM KOLINK: THE BASTION Stylish Midi-Tower for motherboards up to E-ATX format Steel front & top panel for a premium finish Side panel made from tempered glass with hinges Digitally addressable RGB lighting on the power supply cover A pre-installed 120mm rear-mounted fan with digitally addressable RGB LEDs Up to five 120mm & two 140mm fans possible in total Space for graphics cards up to 370 mm long, CPU cooler up to 160 mm tall I/O panel with control for RGB-LEDs, 1x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0 Support for up to 280mm radiators on the top panel THE KOLINK BASTION: A SPACIOUS CASE FOR GAMING HARDWARE Even if the outer

Dimensions correspond to a Midi-Tower format, the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design. With 370 mm space up to the front, there is also enough room for even the longest graphics cards. In terms of vertical space, users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare. A cover conceals the power supply unit & the HDD cage in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the rear of the motherboard. Those who rely on air cooling will appreciate the number of slots for 120 mm fans. Two 120 mm fans can be mounted on the power supply cover, while a removable air filter under the power supply ensures a dust-free supply of fresh air. The top of the case is fitted with a mesh through which air can flow with a minimum of resistance. Here, too, a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary. A powerful 120 mm fan already occupies the available slot at the rear. The pre-installed fan is in addition equipped with front- & rear digitally addressable RGB-LED lighting. Of course, compatible radiators can be installed instead of fans. TEMPERED GLASS & RGB-LEDS TO SET YOUR HARDWARE APART! Even the motherboard tray is an eye-catcher in this case. Instead of boring squares & rectangles, the recess behind the motherboard has an original shape to it. Cable management in the case is a breeze thanks to the smartly placed pass-throughs & cable guides. The end result of your cable management efforts can then be admired through a tempered glass side door, which can also be lifted out at the hinges when needed. A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover. An acrylic frosted glass cover helps light diffuse evenly. A switch on the I/O panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura & MSI Mystic Light Sync. The pre-installed fan's lighting is also controlled via a compatible 3-pin plug (5VDG). Both can be connected to the two connectors of the controller on the I/O panel. A 3-pin connector is also available on the fan to which further RGB components can be connected. Alternatively, strips & fans can be connected to a corresponding 3-pin connector on the motherboard & controlled via its onboard software directly. This then allows the RGB switch on the I/O panel to be used as a reset button. In addition to the RGB/ Reset switch, there are one USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 connections as well as a 3.5 millimetre jack for headphones & microphones, alongside a power LED & an HDD LED. Technical

Details:

Dimensions (W x H x D): 432 x 205 x 490 mm

Material: Steel, tempered glass, plastic Weight: approx. 5.9kg
Colour: Black Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX Total possible fans: 2x 120/140 mm (cover) 2x 120 mm (power supply cover) 1x 120 mm (rear) Pre-installed: 1x 120 mm Rear side Radiator mountings: 1x 240/280 mm (cover) 1x 240 mm (power supply cover) 1x 120 mm (rear) Filter: Cover








...

Back with a THICC vengeance, the Big Chungus UNIT Edition improves on various aspects of the original case, including upgrading all 5 fans to dual ring ARGB PWM versions! Added to that, the stand is now anodized black & comes pre-attached out of the box. Showing off your hardware from every side, the case is ideal for showing off a custom water cooling loop
- & the fact that the huge case provides plenty of room doesnt hurt either. The materials used are first-class: The two sides, the front & even the lid are made from subtly tinted tempered glass. The base with the I/O panel is made from aluminium. The frame utilizes 1.0mm thick black powder coated steel. Features Extravagant showcase for motherboards up to E-ATX Both side parts, front & lid made from tinted tempered glass Base made from high-quality black anodized aluminium Five pre-installed 120mm PWM fans with digitally addressable RGB-LEDs Two pre-installed ARGB strips ARGB-LED PWM controller with infrared remote control Alternative RGB control via motherboard using 3-pin 5VDG connector Graphics cards up to 335 millimeters, CPU cooler up to 175 mm Supports 2 x 2.5"/3.5" + 2 x 2.5" drives I/O Panel with 1x USB (Universal Serial Bus) 3.1 Type C, 1x USB (Universal Serial Bus) 3.1, 1x USB (Universal Serial Bus) 2.0, Audio In/ Out Big Chungus UNIT Edition: The Perfect Way to Show off Hardware Thanks to the tinted tempered glass panels on both sides, as well as on the lid & on the front, Big Chungus is the perfect place for some powerful gaming hardware. A motherboard up to E-ATX form factor will fit in this spacious frame. Graphics cards up to a length of 335 millimetres can be installed, with CPU coolers up to 175 millimetres high. Thanks to the large cut-outs in the frame, the case remains remarkably light despite its size. This also ensures an optimal air supply from the outside. The angular case sits slightly angled upwards on a distinctive base, which is also made from black anodized aluminium. The I/O panel offers excellent connectivity, with a modern USB (Universal Serial Bus) 3.1 Type C port as well as a USB (Universal Serial Bus) 3.1 & an USB (Universal Serial Bus) 2.0 port. With this variety of connections, almost all USB (Universal Serial Bus) peripherals can be used directly on the case, whether keyboard & mouse, external USB (Universal Serial Bus) data carriers or even smartphones, which can even be charged there. Ample Space for Air & Water Cooling Five 120 mm PWM fans with digitally addressable dual ring RGB-LEDs are already pre-installed. Four of them adorn the front & can be admired via the tinted tempered glass. A further 120 mm PWM fan, also with digitally addressable RGB-LEDs, is integrated into the single fan slot on the rear. Two additional 120 mm fans can be installed under the lid & three 120 mm fans can be installed in the bottom. Accordingly, the fans can also be replaced by radiators. 360 mm radiators can be mounted on the base & front, & there is room for a 240 radiator in the roof. The ATX power supply unit (available separately) is mounted beneath the three fan slots on the base & is hidden by the base. It can be up to 220 millimetres in length. One feature that stands out visually is the versatile PWM fan & ARGB controller, which is mounted behind the motherboard tray. The five pre-installed fans are connected to it. The two ARGB-LED strips are connected at the side. in addition, there are 5 more slots available for other 6-Pin fans if needed. The ARGB-LED lighting is controlled via an included infrared remote control. The controller/hub can also be connected to a motherboard via a cable, & the ARGB LEDs can then be synchronised with other ARGB components. The fans are also PWM controlled via the cable connecting to the controller.
...

CASTLE With its minimalist exterior, spacious interior and tempered glass side door, the Castle Midi-Tower from Kolink certainly leaves a lasting impression. The reserved exterior goes a long way to making the hardware you do choose to install look its very best. Designed for excellent airflow, the case supports motherboards up to ATX in form factor along with graphics cards up to 350 mm long - enough space for the powerful gaming hardware you need. Despite the robust tempered glass side, the Kolink Castle still only weighs in at just 5, 1 Kg. And because the side is easy to open, the Castle is perfect for people who appreciate having quick & easy access to the innards of their PC when it comes to tweaks & upgrades. The Features of the Kolink Castle Midi-Tower at a Glance Ascetic, minimalist design in black that supports motherboards up to ATX Tempered glass side: 4 mm thick 2x Pre-installed 120 mm fans, 6 possible in total I/O Panel with 2x USB (Universal Serial Bus) 2.0 / 1x USB (Universal Serial Bus) 3.0 & HD Audio In/ Out, LEDs for power and HDD Support for radiators up to 240 mm in front & in roof 2x 3, 5/2, 5“ Drive slots, 4x slots for 2, 5” drives Graphics cards up to 35 cm long & CPU coolers 16 cm high supported Tempered Glass Side & Two Pre-Installed Fans The robust chassis consists of 1 mm thick SECC steel and is equipped with a 4-mm-thick tempered glass side door with a plastic brushed aluminium look front. The whole interior is coated in black & also

Includes:: a PSU shroud to help give the system an exceptionally clean aesthetic. Beneath this you will find a pre-installed drive cage with brackets for three 3, 5- or 2, 5” drives that leaves plenty of space for the power supply. On the PSU shroud, as in front of the motherboard tray, there are a total of four slots for 2, 5” drives. In order to keep your gaming hardware kept well-supplied with fresh air, two of six possible 120 mm fans, both in black, come included with the case. One is located in the bottom of three total slots located behind the front panel, the second is located in the single slot at the back. The roof of the case supports two further 120 mm fans if required. The front of the case also supports two 140 mm fans. Dust Filters Keep the Kolink Castle Clean The motherboard tray & the PSU cover offer multiple openings for excellent cable management options. A 240 mm radiator can fit in the roof & the front of the Castle case. With fine-mesh dust filters installed on the air inlets in the roof & on the bottoms of the case, users will appreciate the extra degree of dust protection this allows. These dust filters have a honeycomb design & are magnetic, adding to the overall convenience. Graphics cards up to 35 cm long are supported as well as CPU coolers up to 16 cm in height. in addition, the I/O panel on the front

Includes::, in addition to two USB 2.0 ports, a single USB 3.0 Type-A port. A cut-out for a switch to control the RGB lighting is available, this however does not come included with the case and is available for purchase separately. Power & drive access LEDs are included.



...

Following on the popular launch of the Citadel Mesh RGB, comes the Kolink Citadel Glass SE. The front panel has been changed to tempered glass for a premium look, & also

Includes:: a pair of ARGB strips that accent both sides of the front panel. On top of that, the Citadel Glass SE adds a front USB3.2 Type-C port on the I/O panel. With a hinged tempered glass side panel & 3 a RGB 120mm PWM fans, your components & lighting will be on full display, allowing for some truly stunning results. THE FEATURES OF THE KOLINK CITADEL GLASS SE AT A GLANCE Glass front panel with 2 x pre-installed ARGB LED PWM Fans A pair of ARGB strips accenting the front panel Pre-installed rear 120mm PWM fan with digitally addressable RGB lighting RGB controller hub with remote control allowing various lighting modes & effects Option to sync to motherboard software provided as standard Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 1 x USB3.2 Gen 2 Type-C, 2x USB3.0, HD Audio Graphics cards up to 345mm supported, CPU coolers up to 190mm, PSUs up to 200mm KOLINK CITADEL GLASS SE: enhanced AESTHETICS, ATTRACTIVE LIGHTING The Kolink Citadel Glass SE comes with three 120mm ARGB PWM fans installed as standard. The addressable RGB fans can be controlled via the supplied RGB controller & remote, or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. These fans offer good performance, attractive lighting effects & can even be automatically speed controlled through connecting them to your motherboards PWM headers. The full glass front panel, alongside the dual ARGB LED strip accents, which can also be controlled via the supplied remote/motherboard connection, add to the excellent aesthetics of the case. Users are also free to install a 280mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140mm fans in the roof, which is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. THE KOLINK CITADEL GLASS SE: HARDWARE CAPABLE The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19cm tall. in addition, the I/O panel located at the front possesses a USB3.2 Gen 2 Type-C port as well as a pair of USB3.0 Type-A ports.


...

For those who want a compact system with substantial airflow, look no further than the Kolink Citadel Mesh Micro-ATX Case. Featuring a full mesh front panel with a pair of pre-installed 12cm PWM fans, the Kolink Citadel Mesh sports both an attractive design & a feature rich chassis. With a hinged tempered glass side panel, your components will be on full display, allowing some truly stunning results. Features Full mesh front panel with 2 x pre-installed 12cm PWM fans Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 1x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 345 mm supported, CPU coolers up to 190 mm, PSUs up to 200 mm Kolink Citadel Mesh: Airflow meets Performance The Kolink Citadel Mesh comes with a pair of 12cm PWM fans installed as standard. These fans offer both good performance & low noise, & can be automatically speed controlled through connecting them to your motherboards PWM headers. The full mesh front panel also contributes to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140 mm fans in the roof, & one 120/140 mm fan to the rear. The roof is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. The Kolink Citadel Mesh: Ready for Enthusiasts The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19 cm tall. in addition, the I/O panel located at the front possesses an USB (Universal Serial Bus) 2.0 port as well as a pair of USB (Universal Serial Bus) 3.0 Type-A ports
...

For those who want a compact system with substantial airflow & ARGB lighting, look no further than the Kolink Citadel Mesh RGB Micro-ATX Case. Featuring a full mesh front panel with a pair 120mm ARGB LED PWM fans, the Kolink Citadel Mesh has a range of lighting effects & modes, controlled using the supplied remote or via compatible motherboard software. With a hinged tempered glass side panel, your components & lighting will be on full display, allowing some truly stunning results. THE FEATURES OF THE KOLINK CITADEL MESH RGB AT A GLANCE Full mesh front panel with 2 x pre-installed ARGB LED PWM Fans Pre-installed rear 120mm PWM fan with digitally addressable RGB lighting RGB controller hub with remote control allowing various lighting modes & effects Option to sync to motherboard software provided as standard Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 1x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 345 mm supported, CPU coolers up to 190 mm, PSUs up to 200 mm KOLINK CITADEL MESH RGB: EXCELLENT AIRFLOW WITH ATTRACTIVE LIGHTING The Kolink Citadel Mesh RGB comes with three 120mm ARGB PWM fans installed as standard. The addressable RGB fans can be controlled via the supplied RGB controller & remote, or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. These fans offer good performance, attractive lighting effects & can even be automatically speed controlled through connecting them to your motherboards PWM headers. The full mesh front panel also contributes to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140 mm fans in the roof, which is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. THE KOLINK CITADEL MESH RGB: HARDWARE CAPABLE The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19 cm tall. in addition, the I/O panel located at the front possesses two USB (Universal Serial Bus) 2.0 ports as well as a pair of USB (Universal Serial Bus) 3.0 Type-A ports.
...

The Kolink Citadel Micro-ATX case has a reserved & ascetic exterior that conceals a surprising amount of space & features within. In the front & on the roof, despite the diminutive form factor, users will be pleased to know that radiators up to 240 mm are supported. The left side panel is made from tinted tempered glass & this helps give the compact case an attractive modern look. The sleek plastic front has the appearance of brushed aluminium & this complements the overall aesthetic of the Kolink Citadel Micro-ATX case nicely. The open roof of the case has a dust filter below which is located a stylish honeycomb-style mesh. The Kolink Citadel Micro-ATX case is ideal for all those that want the most powerful hardware possible while looking good at the same time. The Kolink Citadel Micro-ATX Case at a Glance: Sleek design with tempered glass side panel & roof with mesh Space for a 240 mm radiator in the front & roof Space for up to 350 mm long graphics cards & CPU coolers up to 160 mm Two pre-installed 120 mm fans in the front & rear Dust filters in the roof & base value-Oriented Micro-ATX Case from Kolink for Gamers The Kolink Citadel is a great value Micro-ATX case for gamers. It supports graphics cards up to 35 cm in length. In order to raise the overall gaming potential of the case yet further, the front of the case also supports a 240 mm radiator of an AIO watercooler, thereby keeping the CPU as cooler as possible during intense gaming sessions. CPU tower-style coolers can be up to 160mm tall. Despite the front being made from plastic, it enjoys the look of brushed aluminium & this contributes significantly to the overall reserved & minimalist aesthetic of the case. A side-facing fan inlet enables excellent airflow, with the fine honeycomb mesh also adding a certain flair. In terms of fans, the front allows for up to three 120 mm- or two 140 mm fans, a 120 mm fan does come pre-installed however. The roof fits two 120 mm fans, & the rear

Includes:: an additional 120mm pre-installed fan.

Includes:: PSU Shroud & Tempered Glass Side Panel The back of the motherboard tray allows for two 2, 5" SSDs to be installed. Beneath the PSU shroud however, the case provides a drive cage for holding two 3, 5" HDDs, & with the requisite spacers (not included) users can install 2, 5" drives instead. A PSU shroud & plenty of space for the cable management combines to make the interior look remarkably tidy, & given the tempered glass side panel, this is certainly appreciated. The I/O panel in the roof is equipped with a USB (Universal Serial Bus) 3.0- & two USB (Universal Serial Bus) 2.0 ports alongside two audio jacks. Technical

Details: Dimensions: 200 x 412 x 396 mm (W x H x D)

Material: Steel (Body), plastic (Front) Weight: approx. 4, 6kg

Colour: Black Form factor: Micro-ATX, Mini-ITX Total possible fans: 3x 120 mm / 2x 140 mm (front) 2x 120 mm (roof) 1x 120 mm (rear) Pre-installed: 1x 120 mm (rear, 3-pin, 1.200 RPM) 1x 120 mm (front, 3-pin, 1.200 RPM) Filter: Bottom (removable) Radiator Mountings: 1x 120 mm (Rear) 1x 240 / 140 mm (Front) 1x max. 240 mm (roof) Drive bays: 2x 2, 5 / 3, 5" max. (internal) 2x 2, 5" max. (internal) PSU: 1x Standard ATX (optional) Expansion slots: 4 I/O Panel: 1x USB (Universal Serial Bus) 3.0 1x USB (Universal Serial Bus) 2.0 2x 3, 5 mm jack (1x Audio-In / -Out) Max GPU length: 350 mm Max CPU cooler

Height: 160 mm











...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. The 400 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 348W & 29A on the +12V rail while providing 80W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & a 6+2 PCIe pin connector for dedicated graphics cards. Three SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. Main Features 348W & 29A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 1x PCIe 6+2-pin, 3x SATA, 2x Molex ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. Features 444W & 37A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 2x 6+2-pin, 4x SATA, 2x Molex Kolink Classic Power: Full performance & high efficiency The 500 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 444W & 37A on the +12V rail while providing 100W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & two 6+2 pin connectors for dedicated graphics cards. Four SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains. ...

The Classic Power PSUs from Kolink boast an enhanced circuit design & an associated performance increase. These features offer a significant enhancement of voltage regulation & meet the needs of modern powerful computers. In addition, the extremely quiet 120mm fan, with a fined-tuned RPM curve, has been optimized for airflow. This makes the Classic Power the quietest power supply of its kind. The Classic Power PSUs looks amazing in any high-end gaming system due to its modern design & the flexible & flat cables use for connections across the system. THE KOLINK CLASSIC POWER 600W POWER SUPPLY AT A GLANCE: 546W & 45.5A on a 12V rail 80 PLUS bronze certificate for high efficiency ATX form factor with a length of 160 mm Modern look with flat black cables Connectors: 1x 24-pin, 1x 4+4-pin, 2x 6+2-pin, 4x SATA, 2x Molex KOLINK CLASSIC POWER: FULL PERFORMANCE & HIGH EFFICIENCY The 600 Watt model of the Classic Power series offered here has enough connections & performance for fast gaming computers with basic equipment. The PSU delivers up to 546W & 45.5A on the +12V rail while providing 100W & 15A each on the +3.3V & +5V rails. This especially high efficiency meets the requirements of 80 Plus Bronze 230V EU & exceeds 85/82/82 percent at 50/20/100 percent load (at 230 Volt input voltage). The PSUs highly efficient circuit design features independent DC-to-DC converters for the 3.3V & 5V outputs, ensuring extremely precise voltage regulation. Each example of Classic-Power series is cooled by a 120 mm fan with durable & quiet sleeve bearings that offer a fine-tuned RPM curve. Thanks to the optimized airflow, the fan & thus the entire PSU remain quiet as a whisper. Besides the 20+4 pin for the motherboard, the Kolink Classic Power has a 4+4 pin connector for the CPU & two 6+2 pin connectors for dedicated graphics cards. Four SATA & two Molex connectors are available for additional components. The flat, flexible & completely black cables have a modern look & fit into almost any up-to-date gaming setup. Note: For environmental reasons the manufacturer does not supply a power cord for connection to the mains ...