When high current, reliability & stability are important, the tried & tested Kokam-batteries are just the right batteries. We have a large collection of the most different battery types for you so that you can select the right battery for your micro-helis, motor sails, flight models or also for the model cars. ...

Just like its bigger brother, the Kolink Aviator M RGB is an excellent example of a Micro-ATX gaming case that is packed full of features without the hefty pricetag. The Aviator M comes with a premium matte finish, & 2 pre-installed fans, both of which are RGB, including a controller with 9 colour modes. The Aviator M RGB comes with support for up to 320mm VGA cards, 170mm CPU Coolers & 240mm Radiators on the front panel. Furthermore, the Aviator M RGB comes with a USB3.0 port as standard & a transparent side window to show off your build. The Kolink Aviator M RGB is an excellent Micro-ATX gaming chassis & represents outstanding value for your money within the gaming range. Features
- 1 x Front USB (Universal Serial Bus) 3.0 port
- 2 x 12cm 18 LED RGB fans installed as standard
- 9 Colour Modes
- Red, Green, Blue, violet, Orange, White, Cyan + Pulsating & Breathing Colour Cycle.
- Large hexagonal mesh on front & top for good airflow.
- Equipped with a stylish pedestal that lifts your chassis & improves airflow.
- Bottom PSU placement.
- Tool free SSD, HDD side installation.
- Tinted transparent ABS window for full view of interior.
- 240mm radiator installable at the front Specifications
- Model: Aviator M Black
- Type: Micro-ATX Case
-

Colour: Black with matte front panel finish
- Case

Material: 0.5mm Steel/ Plastic
- Power Supply Orientation: Bottom
- Motherboard Support: Micro-ATX/ Mini-ITX
- External 5.25" Bays: 0




















...

Renowned for their innovative & high-performance contributions to the world of PC cases, Kolink has created the Balance Midi-Tower as a feature-rich gaming case. This case may have a stunning exterior, but behind this facade lies a lot of space for powerful gaming hardware aswell. All this gaming goodness can be admired through the tempered glass side panel, & as it supports motherboards up to E-ATX in form factor, there will be plenty to look at. A thoughtfully included PSU shroud also helps users stash away unsightly cables. The front of the case, with its fine mesh & air vents, helps ensure not only good airflow, it also helps accentuate the digitally addressable RGB-LED strip & the look of the case as a whole. A switch on the I/O panel allows the lighting to be controlled. Alternatively, the strip can be connected directly to the motherboard & controlled that way instead. The overall ventilation of the case is also helped by the presence of a fine mesh with integrated dust filter on the top. A pre-installed 120 mm fan is also equipped with d ARGB lighting. Features Stylish Midi-Tower for motherboards up to E-ATX format Tempered glass side panel for an unobstructed view of the interior Front with fine-mesh ventilation grille Attractive d ARGB lighting on the front A pre-installed 120 mm fan with d ARGB lighting at the rear Up to five 120 mm- & four 140 mm fans possible in total Space for graphics cards up to 370 mm tall, CPU coolers up to 162 mm I/O Panel with controller for RGB-LEDs, 1x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0 Kolink Balance: Plenty of Space for Powerful Gaming Hardware Even though the outer

Dimensions of the case are those of a Midi-Tower, the Balance uses its clever design in such a way as to make space for even an E-ATX board if necessary. Graphics cards up to 370 mm in length will fit comfortably, & even tall CPU coolers up to 162 mm in height will fit. One of the highlights of the case is the fact that GPUs can be mounted vertically using a PCI-E riser cable (sold separately)
- meaning that users are really free to make their system stand out from the crowd. A PSU shroud conceals the power supply & the HDD cage, where two 3.5"- or two 2.5" drives can be installed. Two more 2.5" SSDs can be installed to the rear of the motherboard. As for those who prefer to opt for air cooling, there are more than enough slots for 120 mm fans. The front allows for three 120 mm- or two 140 mm fans to be installed. The roof supports either two 120 mm or two 140 mm fans. The cover is equipped with a mesh that allows the system to benefit from a plentiful supply of fresh air
- & this is combined with a dust filter to ensure the interior doesnt need frequent cleaning either. The rear of the case supports a high-performance 120 mm fan, a 360 mm or 280 mm radiator can be installed in the front, & a further 280 mm radiator can be installed in the roof if needed. The pre-installed 120 mm fan can be replaced with an identically-sized radiator. Tempered Glass & RGB-LEDs: Showcase Your System Thanks to the clever locations of the cable guides & brackets, users will enjoy the various benefits of smart cable management. All the more important as so much of the case is on show, thanks to the use of a tempered glass side panel. In the centre of the front of the case, users will find a strip with d ARGB-LEDs. These LEDs & their effects can be controlled via a switch situated on the I/O panel. Alternatively, the strip can be connected directly to a compatible ARGB motherboard & controlled that way instead. Aside from the RGB button, there are also power- & reset buttons alongside a USB (Universal Serial Bus) 3.0 port, two USB (Universal Serial Bus) 2.0 ports, Power/HDD-LEDs, & a 3.5 mm jack for headphones & microphones.



...

Noble look & spacious interior: The Midi-Tower Kolink Bastion combines functionality with a restrained but chic exterior. Beneath the tempered glass side, the Midi-Tower is decorated with an addressable RGB-LED strip. Its colours shine out from behind an opaque acrylic glass strip. The colour scheme is accentuated by a rear fan with digitally addressable RGB-LEDs. The lighting can be controlled via a switch on the I/O panel, or by compatible addressable RGB motherboards using the 3-Pin connector provided. Furthermore, the spacious interior is more than capable of supporting lot of powerful hardware. A fine mesh with integrated dust filter on the top is also provided, ensuring your components are supplied with fresh air as well as kept dust-free. Features Stylish Midi-Tower in White for motherboards up to E-ATX format White Steel front & top panel for a premium finish Side panel made from tempered glass with hinges Digitally addressable RGB lighting on the power supply cover A pre-installed 120mm rear-mounted fan with digitally addressable RGB LEDs Up to five 120mm & two 140mm fans possible in total Space for graphics cards up to 370 mm long, CPU cooler up to 160 mm tall I/O panel with control for RGB-LEDs, 1x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0 Support for up to 280mm radiators on the top panel The Kolink Bastion: A Spacious Case for Gaming Hardware Even if the outer

Dimensions correspond to a Midi-Tower format, the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design. With 370 mm space up to the front, there is also enough room for even the longest graphics cards. In terms of vertical space, users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare. A cover conceals the power supply unit & the HDD cage in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the rear of the motherboard. Those who rely on air cooling will appreciate the number of slots for 120 mm fans. Two 120 mm fans can be mounted on the power supply cover, while a removable air filter under the power supply ensures a dust-free supply of fresh air. The top of the case is fitted with a mesh through which air can flow with a minimum of resistance. Here, too, a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary. A powerful 120 mm fan already occupies the available slot at the rear. The pre-installed fan is in addition equipped with front- & rear digitally addressable RGB-LED lighting. Of course, compatible radiators can be installed instead of fans. Tempered Glass & RGB-LEDs to Set your Hardware Apart! Even the motherboard tray is an eye-catcher in this case. Instead of boring squares & rectangles, the recess behind the motherboard has an original shape to it. Cable management in the case is a breeze thanks to the smartly placed pass-throughs & cable guides. The end result of your cable management efforts can then be admired through a tempered glass side door, which can also be lifted out at the hinges when needed. A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover. An acrylic frosted glass cover helps light diffuse evenly. A switch on the I/O panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura & MSI Mystic Light Sync. The pre-installed fans lighting is also controlled via a compatible 3-pin plug (5VDG). Both can be connected to the two connectors of the controller on the I/O panel. A 3-pin connector is also available on the fan to which further RGB components can be connected. Alternatively, strips & fans can be connected to a corresponding 3-pin connector on the motherboard & controlled via its onboard software directly. This then allows the RGB switch on the I/O panel to be used as a reset button. In addition to the RGB/ Reset switch, there are one USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 connections as well as a 3.5 millimetre jack for headphones & microphones, alongside a power LED & an HDD LED.

...

Noble look & spacious interior: The Midi-Tower Kolink Bastion combines functionality with a restrained but chic exterior. Beneath the tempered glass side, the Midi-Tower is decorated with an addressable RGB-LED strip. Its colours shine out from behind an opaque acrylic glass strip. The colour scheme is accentuated by a rear fan with digitally addressable RGB-LEDs. The lighting can be controlled via a switch on the I/O panel, or by compatible addressable RGB motherboards using the 3-Pin connector provided. Furthermore, the spacious interior is more than capable of supporting lot of powerful hardware. A fine mesh with integrated dust filter on the top is also provided, ensuring your components are supplied with fresh air as well as kept dust-free. A STYLISH HIGH-END CASE FROM KOLINK: THE BASTION Stylish Midi-Tower for motherboards up to E-ATX format Steel front & top panel for a premium finish Side panel made from tempered glass with hinges Digitally addressable RGB lighting on the power supply cover A pre-installed 120mm rear-mounted fan with digitally addressable RGB LEDs Up to five 120mm & two 140mm fans possible in total Space for graphics cards up to 370 mm long, CPU cooler up to 160 mm tall I/O panel with control for RGB-LEDs, 1x USB (Universal Serial Bus) 3.0 & 2x USB (Universal Serial Bus) 2.0 Support for up to 280mm radiators on the top panel THE KOLINK BASTION: A SPACIOUS CASE FOR GAMING HARDWARE Even if the outer

Dimensions correspond to a Midi-Tower format, the Bastion is designed to support a motherboard up to E-ATX in size thanks to its ingenious design. With 370 mm space up to the front, there is also enough room for even the longest graphics cards. In terms of vertical space, users will appreciate 160 mm of space available to allow the majority of CPU coolers to fit with room to spare. A cover conceals the power supply unit & the HDD cage in which two 3.5-inch or two 2.5-inch drives can be installed. Two 2.5-inch SSDs can be attached to the rear of the motherboard. Those who rely on air cooling will appreciate the number of slots for 120 mm fans. Two 120 mm fans can be mounted on the power supply cover, while a removable air filter under the power supply ensures a dust-free supply of fresh air. The top of the case is fitted with a mesh through which air can flow with a minimum of resistance. Here, too, a dust filter ensures that the hardware inside does not need to be cleaned more often than necessary. A powerful 120 mm fan already occupies the available slot at the rear. The pre-installed fan is in addition equipped with front- & rear digitally addressable RGB-LED lighting. Of course, compatible radiators can be installed instead of fans. TEMPERED GLASS & RGB-LEDS TO SET YOUR HARDWARE APART! Even the motherboard tray is an eye-catcher in this case. Instead of boring squares & rectangles, the recess behind the motherboard has an original shape to it. Cable management in the case is a breeze thanks to the smartly placed pass-throughs & cable guides. The end result of your cable management efforts can then be admired through a tempered glass side door, which can also be lifted out at the hinges when needed. A strip of digitally addressable RGB-LEDs is attached to the front of the power supply cover. An acrylic frosted glass cover helps light diffuse evenly. A switch on the I/O panel is responsible for controlling the lighting effects along with a 3-Pin connector for compatible addressable motherboards such as Asus Aura & MSI Mystic Light Sync. The pre-installed fan's lighting is also controlled via a compatible 3-pin plug (5VDG). Both can be connected to the two connectors of the controller on the I/O panel. A 3-pin connector is also available on the fan to which further RGB components can be connected. Alternatively, strips & fans can be connected to a corresponding 3-pin connector on the motherboard & controlled via its onboard software directly. This then allows the RGB switch on the I/O panel to be used as a reset button. In addition to the RGB/ Reset switch, there are one USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 connections as well as a 3.5 millimetre jack for headphones & microphones, alongside a power LED & an HDD LED. Technical

Details:

Dimensions (W x H x D): 432 x 205 x 490 mm

Material: Steel, tempered glass, plastic Weight: approx. 5.9kg
Colour: Black Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX Total possible fans: 2x 120/140 mm (cover) 2x 120 mm (power supply cover) 1x 120 mm (rear) Pre-installed: 1x 120 mm Rear side Radiator mountings: 1x 240/280 mm (cover) 1x 240 mm (power supply cover) 1x 120 mm (rear) Filter: Cover








...

CASTLE With its minimalist exterior, spacious interior and tempered glass side door, the Castle Midi-Tower from Kolink certainly leaves a lasting impression. The reserved exterior goes a long way to making the hardware you do choose to install look its very best. Designed for excellent airflow, the case supports motherboards up to ATX in form factor along with graphics cards up to 350 mm long - enough space for the powerful gaming hardware you need. Despite the robust tempered glass side, the Kolink Castle still only weighs in at just 5, 1 Kg. And because the side is easy to open, the Castle is perfect for people who appreciate having quick & easy access to the innards of their PC when it comes to tweaks & upgrades. The Features of the Kolink Castle Midi-Tower at a Glance Ascetic, minimalist design in black that supports motherboards up to ATX Tempered glass side: 4 mm thick 2x Pre-installed 120 mm fans, 6 possible in total I/O Panel with 2x USB (Universal Serial Bus) 2.0 / 1x USB (Universal Serial Bus) 3.0 & HD Audio In/ Out, LEDs for power and HDD Support for radiators up to 240 mm in front & in roof 2x 3, 5/2, 5“ Drive slots, 4x slots for 2, 5” drives Graphics cards up to 35 cm long & CPU coolers 16 cm high supported Tempered Glass Side & Two Pre-Installed Fans The robust chassis consists of 1 mm thick SECC steel and is equipped with a 4-mm-thick tempered glass side door with a plastic brushed aluminium look front. The whole interior is coated in black & also

Includes:: a PSU shroud to help give the system an exceptionally clean aesthetic. Beneath this you will find a pre-installed drive cage with brackets for three 3, 5- or 2, 5” drives that leaves plenty of space for the power supply. On the PSU shroud, as in front of the motherboard tray, there are a total of four slots for 2, 5” drives. In order to keep your gaming hardware kept well-supplied with fresh air, two of six possible 120 mm fans, both in black, come included with the case. One is located in the bottom of three total slots located behind the front panel, the second is located in the single slot at the back. The roof of the case supports two further 120 mm fans if required. The front of the case also supports two 140 mm fans. Dust Filters Keep the Kolink Castle Clean The motherboard tray & the PSU cover offer multiple openings for excellent cable management options. A 240 mm radiator can fit in the roof & the front of the Castle case. With fine-mesh dust filters installed on the air inlets in the roof & on the bottoms of the case, users will appreciate the extra degree of dust protection this allows. These dust filters have a honeycomb design & are magnetic, adding to the overall convenience. Graphics cards up to 35 cm long are supported as well as CPU coolers up to 16 cm in height. in addition, the I/O panel on the front

Includes::, in addition to two USB 2.0 ports, a single USB 3.0 Type-A port. A cut-out for a switch to control the RGB lighting is available, this however does not come included with the case and is available for purchase separately. Power & drive access LEDs are included.



...

Following on the popular launch of the Citadel Mesh RGB, comes the Kolink Citadel Glass SE. The front panel has been changed to tempered glass for a premium look, & also

Includes:: a pair of ARGB strips that accent both sides of the front panel. On top of that, the Citadel Glass SE adds a front USB3.2 Type-C port on the I/O panel. With a hinged tempered glass side panel & 3 a RGB 120mm PWM fans, your components & lighting will be on full display, allowing for some truly stunning results. THE FEATURES OF THE KOLINK CITADEL GLASS SE AT A GLANCE Glass front panel with 2 x pre-installed ARGB LED PWM Fans A pair of ARGB strips accenting the front panel Pre-installed rear 120mm PWM fan with digitally addressable RGB lighting RGB controller hub with remote control allowing various lighting modes & effects Option to sync to motherboard software provided as standard Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 1 x USB3.2 Gen 2 Type-C, 2x USB3.0, HD Audio Graphics cards up to 345mm supported, CPU coolers up to 190mm, PSUs up to 200mm KOLINK CITADEL GLASS SE: enhanced AESTHETICS, ATTRACTIVE LIGHTING The Kolink Citadel Glass SE comes with three 120mm ARGB PWM fans installed as standard. The addressable RGB fans can be controlled via the supplied RGB controller & remote, or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. These fans offer good performance, attractive lighting effects & can even be automatically speed controlled through connecting them to your motherboards PWM headers. The full glass front panel, alongside the dual ARGB LED strip accents, which can also be controlled via the supplied remote/motherboard connection, add to the excellent aesthetics of the case. Users are also free to install a 280mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140mm fans in the roof, which is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. THE KOLINK CITADEL GLASS SE: HARDWARE CAPABLE The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19cm tall. in addition, the I/O panel located at the front possesses a USB3.2 Gen 2 Type-C port as well as a pair of USB3.0 Type-A ports.


...

For those who want a compact system with substantial airflow, look no further than the Kolink Citadel Mesh Micro-ATX Case. Featuring a full mesh front panel with a pair of pre-installed 12cm PWM fans, the Kolink Citadel Mesh sports both an attractive design & a feature rich chassis. With a hinged tempered glass side panel, your components will be on full display, allowing some truly stunning results. Features Full mesh front panel with 2 x pre-installed 12cm PWM fans Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 1x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 345 mm supported, CPU coolers up to 190 mm, PSUs up to 200 mm Kolink Citadel Mesh: Airflow meets Performance The Kolink Citadel Mesh comes with a pair of 12cm PWM fans installed as standard. These fans offer both good performance & low noise, & can be automatically speed controlled through connecting them to your motherboards PWM headers. The full mesh front panel also contributes to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140 mm fans in the roof, & one 120/140 mm fan to the rear. The roof is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. The Kolink Citadel Mesh: Ready for Enthusiasts The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19 cm tall. in addition, the I/O panel located at the front possesses an USB (Universal Serial Bus) 2.0 port as well as a pair of USB (Universal Serial Bus) 3.0 Type-A ports
...

For those who want a compact system with substantial airflow & ARGB lighting, look no further than the Kolink Citadel Mesh RGB Micro-ATX Case. Featuring a full mesh front panel with a pair 120mm ARGB LED PWM fans, the Kolink Citadel Mesh has a range of lighting effects & modes, controlled using the supplied remote or via compatible motherboard software. With a hinged tempered glass side panel, your components & lighting will be on full display, allowing some truly stunning results. Features Full mesh front panel with 2 x pre-installed ARGB LED PWM Fans Pre-installed rear 120mm PWM fan with digitally addressable RGB lighting RGB controller hub with remote control allowing various lighting modes & effects Option to sync to motherboard software provided as standard Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 1x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 345 mm supported, CPU coolers up to 190 mm, PSUs up to 200 mm Kolink Citadel Mesh RGB: Excellent Airflow with attractive lighting The Kolink Citadel Mesh RGB comes with three 120mm ARGB PWM fans installed as standard. The addressable RGB fans can be controlled via the supplied RGB controller & remote, or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. These fans offer good performance, attractive lighting effects & can even be automatically speed controlled through connecting them to your motherboards PWM headers. The full mesh front panel also contributes to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140 mm fans in the roof, which is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. The Kolink Citadel Mesh RGB: Hardware capable The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19 cm tall. in addition, the I/O panel located at the front possesses two USB (Universal Serial Bus) 2.0 ports as well as a pair of USB (Universal Serial Bus) 3.0 Type-A ports.
...

For those who want a compact system with substantial airflow & ARGB lighting, look no further than the Kolink Citadel Mesh RGB Micro-ATX Case. Featuring a full mesh front panel with a pair 120mm ARGB LED PWM fans, the Kolink Citadel Mesh has a range of lighting effects & modes, controlled using the supplied remote or via compatible motherboard software. With a hinged tempered glass side panel, your components & lighting will be on full display, allowing some truly stunning results. THE FEATURES OF THE KOLINK CITADEL MESH RGB AT A GLANCE Full mesh front panel with 2 x pre-installed ARGB LED PWM Fans Pre-installed rear 120mm PWM fan with digitally addressable RGB lighting RGB controller hub with remote control allowing various lighting modes & effects Option to sync to motherboard software provided as standard Hinged tempered glass side panel for unobstructed view of the interior Designed for Micro-ATX-/ Mini-ITX motherboards Dual-Slot Vertical GPU Support (Up to 2.5 slot compatible)
- riser cable sold separately Support for radiators up to 280mm in the front & 240mm at the top I/O Panel with 2x USB (Universal Serial Bus) 3.0 & 1x USB (Universal Serial Bus) 2.0, HD Audio Graphics cards up to 345 mm supported, CPU coolers up to 190 mm, PSUs up to 200 mm KOLINK CITADEL MESH RGB: EXCELLENT AIRFLOW WITH ATTRACTIVE LIGHTING The Kolink Citadel Mesh RGB comes with three 120mm ARGB PWM fans installed as standard. The addressable RGB fans can be controlled via the supplied RGB controller & remote, or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. These fans offer good performance, attractive lighting effects & can even be automatically speed controlled through connecting them to your motherboards PWM headers. The full mesh front panel also contributes to the excellent airflow of the case. Users are also free to install a 280 mm radiator in the front, plus a 240mm radiator in the roof. Aside from the pre-installed fans, users are also free to install two more 120/140 mm fans in the roof, which is where a magnetic dust filter can be found installed on the honeycomb-style mesh. A full tempered glass hinged side panel shows off your system build, & is easily opened & closed using the pull tab. Magnets are used to keep the side panel in place when shut. THE KOLINK CITADEL MESH RGB: HARDWARE CAPABLE The interior comes entirely in black, with a PSU shroud that only adds to the sleek & unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs in the HDD cage provided. Alternatively, 2.5" SSDs can be installed here, or next to the motherboard. The motherboard tray & PSU shroud both offer numerous openings for optimum cable management, with up to 24mm cable management space. Underneath the case is a removable dust filter suitable for an ATX PSU up to 200mm. Graphics cards can be up to 34.5cm long (32cm if mounting a front AIO) & CPU coolers up to 19 cm tall. in addition, the I/O panel located at the front possesses two USB (Universal Serial Bus) 2.0 ports as well as a pair of USB (Universal Serial Bus) 3.0 Type-A ports.
...