The HP 5130 EI Switch Series delivers flexibility, scalability & low TCO at the access layer of medium & large enterprise campus networks. Offering enterprise class Qo S & security, HP Intelligent Resilient Framework (IRF) stacking, static layer 3 routing & RIP, convenient fixed 10 Gb E uplink ports, Po E+, ACLs & delivers energy savings with Energy Efficient Ethernet. ...

Advanced classifier-based Qo S classifies traffic using multiple match criteria based on layer 2, 3, and 4 information;applies Qo S policies such as setting priority level & rate limit to selected traffic on a port, VLAN, or whole switch. Remote configuration & management enables configuration & management through a secure web browser or a CLI located on a remote device. Remote intelligent mirroring mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network. High-density connectivity Provides up to 48 fixed 10/100/1000BASE-T ports in a layer 2/layer 3 switch. High-bandwidth CX4 local stacking Achieves 12 Gb/s per connection when using local CX4 stacking, allowing for up to 96 Gb/s total stacking bandwidth (full duplex) in a resilient stacking configuration. Nonblocking architecture Up to 192 Gb/s nonblocking switching fabric provides wirespeed switching with up to 143 million pps throughput. Hardware-based wirespeed access control lists (ACLs) Help provide high levels of security & ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation. Rapid Ring Protection Protocol (RRPP) Connects multiple switches in a high-performance ring using standard Ethernet technology;traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic & applications. VLAN support & tagging Supports IEEE 802.1Q with 4, 094 simultaneous VLAN IDs. Dynamic Host Configuration Protocol (DHCP) Simplifies the management of large IP networks;supports client;DHCP Relay enables DHCP operation across subnets. Secure management access Delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv 2, SSL, and/or SNMPv 3. Main Specifications
- Product Description: HPE 5130-48G-4SFP+ EI
- switch
- 48 ports
- Managed
- rack-mountable
- Device Type: Switch
- 48 ports
- L3
- Managed
- stackable
- Enclosure Type: Rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+
- Performance: Throughput:130.9 Mpps Routing/ switching capacity:176 Gbps
- Capacity: IPv 4 routing table entries:512 IPv 6 routing table entries:256
- MAC Address Table

Size: 16384 entries
- Jumbo Frame Support: 9216 bytes
- Routing Protocol: Static IPv 4 routing, static IPv 6 routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI
-

Features: DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Weighted Round Robin (WRR) queuing, IPv 6 support, half duplex mode, full duplex mode, s Flow, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (Qo S), Jumbo Frames support, MLD snooping, Per-VLAN Spanning Tree Plus (PVST+), Device Link Detection Protocol (DLDP) support, Rapid Ring Protection Protocol (RRPP) support, Endpoint Admission Defense (EAD), STP Root Guard, LLDP support, DHCP relay, Port Security, dynamic ARP protection, DHCP protection, Strict Priority Queuing (SPQ), port isolation, tagged VLAN, Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V
- Dimensions: (Wx Dx H) 44 cm x 26 cm x 4.36 cm
- Weight: 5kg
- Manufacturer Warranty: Limited lifetime warranty




























...

- Product Description: HPE 5130-48G-Po E+-4SFP+ EI
- switch
- 48 ports
- Managed
- rack-mountable
- Device Type: Switch
-





...

This 2-port 10GBASE-T module provides 2 dual-speed 1000BASE-T or 10GBASE-T RJ-45 ports. Can also be used for low cost stacking. For use with HPE Flex Network 5130 HI & HPE Flex Network 5510 HI switches. ...

HPE 524SFP+ 10 Gigabit Ethernet Card
- PCI Express 3.0 x 8
- 2 Port (s)
- Optical Fiber Improve CPU Utilization with Lower


...

HPE 535T 10 Gigabit Ethernet Card for Server
- PCI Express 3.0 x 8
- 2 Port (s)
- 2
- Twisted Pair Are you looking for



...

Do you need an adapter that is big on capability & small on CPU utilization? The HPE Ethernet 10 Gb 2-port 537SFP+ Adapter has been designed to efficiently deliver high performance, low latency & minimal CPU utilization by offloading many I/O processing within the adapter. Low latency dramatically improves application performance & frees up CPU resources in the host allowing it to do more important tasks Features Improve Application Performance
- HPE Ethernet 10 Gb 2-port 537SFP+ Adapters offload packet processing to reduce CPU utilization with tunnel offloads (VXLAN & NVGRE). Now you can distribute network traffic across CPU cores in your data center.
- Speed up packet processing to service more I/O requests by utilizing data plane development kit (DPDK) feature. Increase I/O Bandwidth for Workload Intensive Applications
- HPE Ethernet 10 Gb 2-port 537SFP+ Adapters deliver single root I/O virtualization (SR-IOV) which increases virtual network performance while decreasing CPU utilization.


...

Designed For Aruba 5406R zl 2, 5406R-44G-Po E+/2SFP+ v 2 zl 2, 5406R-44G-Po E+/4SFP v 2 zl 2, 5406R-8XGT/8SFP+ v 2 zl 2 ...

Designed For Aruba 5406R zl 2, 5406R-44G-Po E+/2SFP+ v 2 zl 2, 5406R-44G-Po E+/4SFP v 2 zl 2, 5406R-8XGT/8SFP+ v 2 zl 2 ...

Designed For HPE Aruba 5406R zl 2, 5406R-44G-Po E+/2SFP+ v 2 zl 2, 5406R-44G-Po E+/4SFP v 2 zl 2, 5406R-8XGT/8SFP+ v 2 zl 2 ...