HPE SATA drives are designed for the reliability & mass storage demanded by today's entry server & external storage environments. The SATA portfolio is categorized into two categories: Entry (ETY) & Midline (MDL) drives. HPE SATA Entry drives are the lowest unit-cost solution for entry-level servers. HPE SATA Midline drives are designed with economical reliability & performance for external storage, backups & archival applications. These high capacity drives provide the lowest $/GB to our customers. Both Entry & Midline SATA drives provide the best price advantage for non-mission critical applications with low workloads of 40% or less. HPE SATA drives are available small form factor (2.5-inch) & large form factor (3.5-inch) & ship with a standard one year warranty. Technical Specifications Drive Interface: SATA 6 Gb/s Disk

Size: 3.5 Inches Disk Capacity: 500GB Disk Speed: 7200RPM Data Transfer Rate: 600 MBps Enclosure type: Internal Dimensions: 2.64cm (W) x 11.07cm (D) x 18.42cm (H) Weight: 1.36kg Warranty: One Year Manufacturer Warranty

...

How do you improve data center power efficiency without impacting IT performance? HPE Flexible Slot Power Supplies provide up to 96% power efficiency with 80PLUS Titanium-certified power supplies that lower server power requirements & reduce power waste in your data center. [1] Its form factor is 25% smaller than previous generation power supplies, providing more space to add additional server options & improve the performance of your servers. These power supplies provide fast, tool-less hot plug access to server power supplies for greater serviceability & are supported across the entire HPE Pro Liant Gen 10 & HPE Pro Liant 300 Gen 9 Server series families, simplifying your spares strategy & further reducing data center costs. ...

The HPE Flex Network 5130 HI Switch Series delivers scalability & resiliency at the access layer of medium & large enterprise campus networks. This Flex Network switch supports enterprise class Qo S & security, HPE Intelligent Resilient Framework (IRF) stacking, static Layer 3 routing & RIP, dual redundant power supplies, fixed & modular 10 Gb E uplinks ports, Po E+, ACLs, IPv 6 & delivers energy savings with Energy Efficient Ethernet. The 5130 HI Switch Series can be managed with HPE Intelligent Management Center (IMC) Software for a single view of your entire network. ...

he HPE Flex Network 5130 HI Switch Series comprises Gigabit Ethernet switches that support static & RIP Layer 3 routing, diversified services, and IPv 6 forwarding, as well as provide four 10-Gigabit Ethernet (10 Gb E) interfaces. Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access & can be used at the edge of a network or to connect server clusters in small data centers. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series. This switch also supports dual modular power supplies. ...

- Product Description: HPE 5130-24G-4SFP+ EI
- switch
- 24 ports
- Managed
- rack-mountable
- Device Type: Switch
-





...

Advanced classifier-based Qo S classifies traffic using multiple match criteria based on layer 2, 3, and 4 information;applies Qo S policies such as setting priority level & rate limit to selected traffic on a port, VLAN, or whole switch. Remote configuration & management enables configuration & management through a secure web browser or a CLI located on a remote device. Remote intelligent mirroring mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network. High-density connectivity Provides up to 48 fixed 10/100/1000BASE-T ports in a layer 2/layer 3 switch. High-bandwidth CX4 local stacking Achieves 12 Gb/s per connection when using local CX4 stacking, allowing for up to 96 Gb/s total stacking bandwidth (full duplex) in a resilient stacking configuration. Nonblocking architecture Up to 192 Gb/s nonblocking switching fabric provides wirespeed switching with up to 143 million pps throughput. Hardware-based wirespeed access control lists (ACLs) Help provide high levels of security & ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation. Rapid Ring Protection Protocol (RRPP) Connects multiple switches in a high-performance ring using standard Ethernet technology;traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic & applications. VLAN support & tagging Supports IEEE 802.1Q with 4, 094 simultaneous VLAN IDs. Dynamic Host Configuration Protocol (DHCP) Simplifies the management of large IP networks;supports client;DHCP Relay enables DHCP operation across subnets. Secure management access Delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv 2, SSL, and/or SNMPv 3. Main Specifications
- Product Description: HPE 5130-48G-4SFP+ EI
- switch
- 48 ports
- Managed
- rack-mountable
- Device Type: Switch
- 48 ports
- L3
- Managed
- stackable
- Enclosure Type: Rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+
- Performance: Throughput:130.9 Mpps Routing/ switching capacity:176 Gbps
- Capacity: IPv 4 routing table entries:512 IPv 6 routing table entries:256
- MAC Address Table

Size: 16384 entries
- Jumbo Frame Support: 9216 bytes
- Routing Protocol: Static IPv 4 routing, static IPv 6 routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI
-

Features: DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Weighted Round Robin (WRR) queuing, IPv 6 support, half duplex mode, full duplex mode, s Flow, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (Qo S), Jumbo Frames support, MLD snooping, Per-VLAN Spanning Tree Plus (PVST+), Device Link Detection Protocol (DLDP) support, Rapid Ring Protection Protocol (RRPP) support, Endpoint Admission Defense (EAD), STP Root Guard, LLDP support, DHCP relay, Port Security, dynamic ARP protection, DHCP protection, Strict Priority Queuing (SPQ), port isolation, tagged VLAN, Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V
- Dimensions: (Wx Dx H) 44 cm x 26 cm x 4.36 cm
- Weight: 5kg
- Manufacturer Warranty: Limited lifetime warranty




























...

- Product Description: HPE 5130-48G-Po E+-4SFP+ EI
- switch
- 48 ports
- Managed
- rack-mountable
- Device Type: Switch
-





...

This 2-port 10GBASE-T module provides 2 dual-speed 1000BASE-T or 10GBASE-T RJ-45 ports. Can also be used for low cost stacking. For use with HPE Flex Network 5130 HI & HPE Flex Network 5510 HI switches. ...

HPE 524SFP+ 10 Gigabit Ethernet Card
- PCI Express 3.0 x 8
- 2 Port (s)
- Optical Fiber Improve CPU Utilization with Lower


...

The HPE Ethernet 10 Gb 2-port 530T Adapter is a dual-port 10GBASE-T adapter, featuring the BCM57810S 10 Gb Ethernet solution from Broadcom in a PCIe 2.0 compliant form factor designed for HPE Pro Liant Gen 8 rack & tower servers. The HPE 530T Adapter delivers full line-rate performance across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances up to 100 meters. Providing high performance Ethernet connectivity, it is ideal for virtual server & cloud computing environments. It supports enterprise class features (VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, PXE boot) & virtualization features (VMware Net Queue & Microsoft VMQ). The adapter's support for HPE Sea of Sensors 3D Technology enhances server performance by reducing energy consumption & expense. ...