The Ewa-Marine C-AFX Rain Cape is designed for protection from the elements-rain, snow, sleet, s&, etc. The flexible, exclusively formulated capes allow easy operation of camera controls. Ewa Marine Rain Capes are not made for underwater use. The cape is mounted to the SLR camera lens by using the included C-A adapter with a 49, 52, 55, 58 or 62mm ring.

Features: Fitted to the lens with the help of a included C-A adapter system. Compatible with: Most 35mm SLR cameras with up to 8" lens & shoe mounted flash Specification: Interior Dimensions: 240x 180x 100mm (Lx Wx H). Accommodates 35mm SLR with up to an 8" lens attached & shoe-mounted flash. Carrying/ Transport: Options- By h&. Weight: 250g.

...

The C-AFX rain cape is the perfect protection against rain, spray, splashed water & even dust, made to fit all SLR cameras (digital & analog) with zoom lenses & a top mounted flash. The cape is made from special double laminated PVC & has an integrated optical glass front port. The camera is fixed directly into the front port by means of the ewa-marine CA adapter. Due to this adapter system the cape will always remain properly positioned in front of the lens. Various zoom & wide angle lenses can be used with the C-AFX raincape. All filter threads from 49mm to 62mm are supported with a CA adapter as a standard. You can also order special CA adapters for lenses with 67mm & 72mm as optional accessories. We also offer a specially modified cape for lenses with a 77mm or 82mm filter thread. This Cape is then called C-AFX100 & is a special order. Please note that only lenses with internal focus can be used in the C-AFX100 raincape. ...

The C-Z100 rain cape is the perfect protection against rain, spray, splashed water, made to fit all SLR cameras (digital & analogue) with zoom lenses. The cape is made from special double laminated PVC & has an integrated optical glass front port. The camera is fixed directly into the front port by means of the ewa-marine CA77 adapter. Due to this adapter system the cape will always remain properly positioned in front of the lens. There is also a rear glass-port is fixed over the viewfinder by means of a aluminium rail which slides onto the cameras hotshoe. Due to these two adapters the cape will always remain properly positioned over the lens & the viewfinder. The C-Z100 rain cape has been specially designed for professional Telezoom lenses. It fits lenses of different makes like the Canon 28-300, 100-400 or the Nikon 80-400 & similar lenses. You can use the camera with the C-Z100 cape on a standard tripod if necessary or desired. The C-Z100 rain cape can also be closed by means of press studs to allow maximum protection or for transport. Under normal operation conditions, one would insert the right hand into the cape for finger tip control, while supporting the camera with the left hand from the outside. Dimensions: Length: 15-35 cm (5 7/8 inch
- 13 3/4 inch).

Width: 25 cm (9 7/8 inch).

Height: 30 cm (11 6/8 inch). Diameter front glass: 95 mm (3 3/4 inch). Weight: 250g (0, 55 lbs).




...

The C500 rain cape is the perfect protection against rain & spray, made to fit all SLR cameras (digital & analogue) with the large professional Telelenses. The cape is made from special double laminated PVC & has an integrated optical glass protecting for the view finder. The rain cape tightened at the sunshade of the lens by means of Velcro. The glass at its back is fixed over the viewfinder by means of a aluminium rail which slides onto the hot shoe of the camera. Due to this adapter & fastening system the cape will always remain properly positioned over the lens & the viewfinder. The C500 rain cape has been specially designed for professional Telelenses. It fits lenses of different makes like the Canon 300 2.8, 400mm, 500mm or 600mm as well as the Nikon 400mm to 600mm lenses & similar lenses from other manufacturers. You can use the camera with the C500 cape on a standard tripod if necessary or desired. The C500 rain cape can also be closed by means of press studs to allow maximum protection. Under normal operation conditions, one would insert the right hand into the cape for finger tip control. Dimensions: Length 35 cm (13 3/4 inch).

Width: 20 cm (7 7/8 inch). Hight: 30 cm (11 6/8 inch). Weight: 180 g (0, 4 lbs).

...

The Ewa-Marine C-A49 49mm Adapter Ring Set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. Then an outer ring pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ100. ...

This Ewa-Marine 55mm adapter ring set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. Then there is an outer ring that pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ-100. ...

This Ewa-Marine 58mm Adapter Ring Set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. Then an outer ring pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ-100. ...

This Ewa-Marine 62mm Adapter Ring Set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. An outer ring then pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ-100. ...

The patented CA system was invented & developed by ewa-marine to allow the lens of a camera to be fixed to the front port of a housing or rain cape. It ensures that the surface of the lens & that of the housings front port are permanently parallel to each other, thus ensuring that there are no reflections or other optical disturbances between these two glass surfaces. Due to the CA system, the front port has the same effect as a clear glass filter would have in every day photography. The CA system is composed of an filter-ring & a fixing-ring. ...

Model ID CA72 / Ewa-Marine CA72
- Lens holder / The patented CA system was invented & developed by ewa-marine to allow the lens
...