Splashi X come in a selection of sizes to fit all compact, digital cameras. Just measure the depth & height of your camera to check which one will fit. Naturally, all Splashi X housings are made by ewa-marine in Germany & come with a HD-quality, optical glass front port, to ensure that you can get perfect quality pictures. The Splashi X housings are manufactured from double laminated PVC & have an optical glass port. As the housings are light-weight & easy to use, you can protect your digital camera from water, s&, dust & humidity. You can go snorkelling (up to 6m / 20ft depth), use on the beach, in the desert, heavy rain, rafting or sailing. It has a pair of non-corrosive & seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of two screw knobs. To find out which size you need, just measure the maximum length of the lens of your digital camera when fully extended. For lenses up to 1.7cm you can use the short front port. For longer lenses up to maximum 3.3 cm use the long front port. If your camera has a longer lens than this when fully extended use the Splashix Extension which allows an additional 10mm of lens travel. ...

The soft lead weight BS7 can be used in almost all the video & photo housings. It is packed in a black fabric case to ensure that the can not leave any marks on or scratch your camera. The soft lead weight has a absolute basis from 0, 75 kg. Please note, that the flexible housing behaves just like the organs of a diver with regards to water pressure. As stated by the law of physics of Boyle-Mariotte (pressure x volume = constant) the volume of air in the housing (just as that in the lungs, diving jacket & the air inclusions in the diving suit) decreases as it descends. In other words, a housing that is positively buoyant on the surface will be neutral at a certain depth & thereafter even show a tendency to sink. This point can be "adjusted" by adding weights to the housing, the amount of air included in the housing & some practice. ...

The video lead weights can either be inserted in the lead-belt included in some housings or strapped to the lead-belts fitted under some units. Please do not hang lead to housings that are not in the water. This will cause unnecessary wear to the housing & decrease its life expectancy. Clip the weights on as the housings reach water level. Both weights are covered in a special latex to ensure that the can not leave any marks on or scratch your camera. Please note, that the flexible housing behaves just like the organs of a diver with regards to water pressure. As stated by the law of physics of Boyle-Mariotte (pressure x volume = constant) the volume of air in the housing (just as that in the lungs, diving jacket & the air inclusions in the diving suit) decreases as it descends. In other words, a housing that is positively buoyant on the surface will be neutral at a certain depth & thereafter even show a tendency to sink. This point can be "adjusted" by adding weights to the housing, the amount of air included in the housing & some practice. These lead weights are also suitable for use with the U-A & U-B autofocus SLR housing series. Ideal also for almost all video housings. ...

The C-AF rain cape is the perfect protection against rain, spray, splashed water & even dust, made to fit all SLR cameras (digital & analog) with zoom lenses. The cape is made from special double laminated PVC & has an integrated optical glas front port. The camera is fixed directly into the front port by means of the ewa-marine C-A adapter. Due to this adapter system the cape will always remain properly positioned infront of the lens. ...

The Ewa-Marine C-AF100 Rain Cape is a flexible, clear rain cover that will protect a camera from the elements; rain, snow, sleet, s&, etc. It will fit a film or digital SLR camera with am internal focus lens up to 8.0" long, with a maximum filter size of 82mm. The rain cape is manufactured from special PVC material & has an integrated, optically neutral flat glass port designed to protect the lens against rain, salt spray, sand dirt, etc. The front glass is held in position by means of a C-AF adapter ring that connects to the lenss filter thread. The cape allows both hand held as well as tripod operation of the camera. A 77mm adapter ring is included. Note: Rain capes are not for underwater use

Features: Made from special PVC & has an integrated, optically neutral flat glass port The camera is fixed directly into the front port by means of the CA adapter. Due to this adapter system the cape will always remain properly positioned in front of the lens. Optically neutral flat glass port designed to protect the lens Compatible with film or digital SLR camera with a lens up to 8.0" long Specification:

Material: Double laminated PVC. Type of Closure: Press-studs at the bottom. Exterior Dimensions: 33.02x 12.7x 31.75cm (Lx Wx H). Interior Dimensions: 32.39x 12.07x 31.12cm (Lx Wx H). Accommodates: Film or digital SLR camera with a lens up to 8.0" long. Carrying/ Transport Options: Handheld. Weight: 425g.



...

The C-AFX rain cape is the perfect protection against rain, spray, splashed water & even dust, made to fit all SLR cameras (digital & analog) with zoom lenses & a top mounted flash. The cape is made from special double laminated PVC & has an integrated optical glass front port. The camera is fixed directly into the front port by means of the ewa-marine CA adapter. Due to this adapter system the cape will always remain properly positioned in front of the lens. Various zoom & wide angle lenses can be used with the C-AFX raincape. All filter threads from 49mm to 62mm are supported with a CA adapter as a standard. You can also order special CA adapters for lenses with 67mm & 72mm as optional accessories. We also offer a specially modified cape for lenses with a 77mm or 82mm filter thread. This Cape is then called C-AFX100 & is a special order. Please note that only lenses with internal focus can be used in the C-AFX100 raincape. ...

The C-Z100 rain cape is the perfect protection against rain, spray, splashed water, made to fit all SLR cameras (digital & analogue) with zoom lenses. The cape is made from special double laminated PVC & has an integrated optical glass front port. The camera is fixed directly into the front port by means of the ewa-marine CA77 adapter. Due to this adapter system the cape will always remain properly positioned in front of the lens. There is also a rear glass-port is fixed over the viewfinder by means of a aluminium rail which slides onto the cameras hotshoe. Due to these two adapters the cape will always remain properly positioned over the lens & the viewfinder. The C-Z100 rain cape has been specially designed for professional Telezoom lenses. It fits lenses of different makes like the Canon 28-300, 100-400 or the Nikon 80-400 & similar lenses. You can use the camera with the C-Z100 cape on a standard tripod if necessary or desired. The C-Z100 rain cape can also be closed by means of press studs to allow maximum protection or for transport. Under normal operation conditions, one would insert the right hand into the cape for finger tip control, while supporting the camera with the left hand from the outside. Dimensions: Length: 15-35 cm (5 7/8 inch
- 13 3/4 inch).

Width: 25 cm (9 7/8 inch).

Height: 30 cm (11 6/8 inch). Diameter front glass: 95 mm (3 3/4 inch). Weight: 250g (0, 55 lbs).




...

The C500 rain cape is the perfect protection against rain & spray, made to fit all SLR cameras (digital & analogue) with the large professional Telelenses. The cape is made from special double laminated PVC & has an integrated optical glass protecting for the view finder. The rain cape tightened at the sunshade of the lens by means of Velcro. The glass at its back is fixed over the viewfinder by means of a aluminium rail which slides onto the hot shoe of the camera. Due to this adapter & fastening system the cape will always remain properly positioned over the lens & the viewfinder. The C500 rain cape has been specially designed for professional Telelenses. It fits lenses of different makes like the Canon 300 2.8, 400mm, 500mm or 600mm as well as the Nikon 400mm to 600mm lenses & similar lenses from other manufacturers. You can use the camera with the C500 cape on a standard tripod if necessary or desired. The C500 rain cape can also be closed by means of press studs to allow maximum protection. Under normal operation conditions, one would insert the right hand into the cape for finger tip control. Dimensions: Length 35 cm (13 3/4 inch).

Width: 20 cm (7 7/8 inch). Hight: 30 cm (11 6/8 inch). Weight: 180 g (0, 4 lbs).

...

The Ewa-Marine C-A49 49mm Adapter Ring Set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. Then an outer ring pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ100. ...

This Ewa-Marine 52mm adapter ring set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. Then there is an outer ring that pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ100. ...