This Ewa-Marine 52mm adapter ring set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. Then there is an outer ring that pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ100. ...

This Ewa-Marine 55mm adapter ring set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. Then there is an outer ring that pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ-100. ...

This Ewa-Marine 58mm Adapter Ring Set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. Then an outer ring pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ-100. ...

This Ewa-Marine 62mm Adapter Ring Set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. An outer ring then pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: D-A D-AX U-AXP U-AXP100 C-AF C-AFX CZ-100. ...

The patented CA system was invented & developed by ewa-marine to allow the lens of a camera to be fixed to the front port of a housing or rain cape. It ensures that the surface of the lens & that of the housings front port are permanently parallel to each other, thus ensuring that there are no reflections or other optical disturbances between these two glass surfaces. Due to the CA system, the front port has the same effect as a clear glass filter would have in every day photography. The CA system is composed of an filter-ring & a fixing-ring. ...

This Ewa-Marine 77mm adapter ring set is used to centre the camera lens in an Ewa-Marine housing. The set consist of a ring that screws onto the lens. Then there is an outer ring that pressure fits into the inside of the housing port. The ring is used with autofocus SLR cameras with internal focusing lenses only. Note: Use this ring with the following housing: U-AXP100 CZ-100. ...

With this Ewa-Marine D-A housing, a whole new world of applications opens up for your digital camera. Inside the housing you can now take the camera safely canoeing, snorkeling or even diving, up to a depth of 30m/100 ft. As you descend, pressure inside the housing remains the same as the surrounding water pressure, preventing implosions. The D-A housing is manufactured from double laminated PVC & has an integrated, optically neutral flat glass port. The external flash fits into the specially designed section on the top of the housing, so it can be used above & below the water. It has a pair of non-corrosive & seawater resistant clamping rails which fit together for perfect sealing. ...

The Ewa-Marine D-AX Housing is an economical solution for using your Fuji Finepix 4900, 6900, or F602 cameras near or at the waters surface, manufactured from double laminated PVC & with an optical glass port. It is rated for dives of up to 100 (30 m) depth; perfect for snorkelling, shallow diving, or generally sandy, dusty, & humidity weather conditions. The D-AX gives your Fuji Finepix camera the best possible protection while being fully operable. When not in use, it is relatively light & takes up little space. A pair of non-corrosive & seawater resistant clamping rails fit together for sealing, tightened by knurled screw knobs. The D-AX allows the attachment of most common shoe-mounted flashes to the top of your Finepix. The D-AX housing is made to fit the Fuji Finepix 4900, 6900, & F602 digital cameras, but will also fit cameras & lenses with flashes that are smaller than 5.9 x 9.4 x 4.7-6.7" (150 x 240 x 120-170mm) Wx Hx D.

Features: An Ideal Near-the-Surface Solution: The Ewa-Marine housings perfect for use at or near the waters surface, such as in sailing or snorkelling, but is also practical for protection from harsh weather conditions. Works with AF: The autofocus function of your camera will work perfectly. Double Laminated PVC Construction: Long lasting housing solution that is easy to maintain & packs in minimal space. Non-Corrosive Clamping Rails: The non-corrosive & seawater resistant clamping rails are secured by knurled thumb screws. Packs up Tight: This housing takes a minimum of space when collapsed. Economical: Priced significantly less than conventional housings. Specification: Construction Double Laminated. PVC Control Type: Pressure Through PVC Controls. All Depth Rating 100 (30 m). Buoyancy Positive Port Fixed, flat Internal. Flash Usable: Yes. External Strobe Connector: No. TTL Compatible: No. Moisture Alarm: None.

Colour: Clear, yellow.

Dimensions (Wx Hx D): 5.9 x 9.4 x 4.7-6.7" (150 x 240 x 120-170mm). Weight (without Camera): 13.4oz. (380g).





...

The Ewa Marine D-CG1 housing is manufactured from double laminated PVC & has an integrated, optically neutral flat glass port. It has a pair of non-corrosive, seawater resistant clamping rails that fit together to form the seal & are secured in place by means of two screw knobs. Rated to a depth of 33 (10 m). This versatile housing can be used in a variety of applications like sandy or dirty conditions, kayaking, or while swimming, snorkelling or diving. Its easy to operate the camera as its various components & buttons can be operated through the PVC. The D-CG1 housing was specially designed for the Canon G1, G2 & the Nikon Coolpix 5000 but it will also fit cameras that are smaller then 7.1 x 5.5 x 2.4-3.5" (180 x 140 x 60-90mm) (Wx Hx D).

Features: Double Laminated. PVC Construction: Long lasting housing solution that is easy to maintain & packs in minimal space. Camera Functions: Accesses to all camera functions through the PVC. Versatile Size & Weight: Small enough to use for other sporting activities like skiing or fishing. Can change buoyancy by adding air or weight. Economical: Priced significantly less than conventional housings.

...

The Ewa-Marine D-LI3 housing is manufactured from double laminated PVC & has an integrated, optically neutral flat glass port. It has a pair of non-corrosive, seawater resistant clamping rails that fit together to form the seal & are secured in place by means of two screw knobs. Rated to a depth of 33 (10 m). This versatile housing can be used in a variety of applications like sandy or dirty conditions, kayaking, or while swimming, snorkelling or diving. Its easy to operate the camera as its various components & buttons can be operated through the PVC. This housing is designed for the Casio Exilim S500 & S600 digital cameras.

Features: Double Laminated PVC Construction: Long lasting housing solution that is easy to maintain & packs in minimal space. Flash Usable: Yes. External Strobe Connector: No. TTL Compatible: No. Moisture Alarm: None.

Colour: Clear, yellow.

Dimensions (Wx Hx D): 4.9 x 2.75 x 0.75" (125 x 70 x 20 mm). Weight: (without Camera) 2.8 oz. (80 g). Included: Ewa-Marine D-LI3, Underwater Housing, Black Adapter, Tube for Lens, Protection Silica gel, Manual, 1 Year Warranty.





...