Outdoor 802.11ac Mesh Wireless Access Point Vigor AP 918R is a wireless access point designed for outdoor environments. It is ideal for providing wireless access to users & devices in any outdoor scenario, including restaurants, gardens, marinas, educational premises or, really, anywhere where outdoor access is needed. The Vigor AP 918R is a dual-band 802.11ac Wave 2 wireless access point & range extender that can be used a part of a Dray Tek Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal & Wi-Fi dead zones. One access point acts as the controller (Mesh root) & in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling. Initial setup of the Vigor AP 918R is easy with the Dray Tek Wireless app, whether it's creating a new Mesh network or being set up in AP & Range Extender modes, the Quick Start Wizard assists throughout. Manage the Vigor AP 918R centrally through the Vigor ACS central management platform, Vigor Connect, Router AP Management, or simply on its own as a st&-alone access point. The Vigor AP 918R has the flexibility to be used how you need it, in any environment. ...

Outdoor 802.11ac Mesh Wireless Access Point Vigor AP 918R is a wireless access point designed for outdoor environments. It is ideal for providing wireless access to users & devices in any outdoor scenario, including restaurants, gardens, marinas, educational premises or, really, anywhere where outdoor access is needed. The Vigor AP 918R is a dual-band 802.11ac Wave 2 wireless access point & range extender that can be used a part of a Dray Tek Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal & Wi-Fi dead zones. One access point acts as the controller (Mesh root) & in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling. Initial setup of the Vigor AP 918R is easy with the Dray Tek Wireless app, whether it's creating a new Mesh network or being set up in AP & Range Extender modes, the Quick Start Wizard assists throughout. Manage the Vigor AP 918R centrally through the Vigor ACS central management platform, Vigor Connect, Router AP Management, or simply on its own as a st&-alone access point. The Vigor AP 918R has the flexibility to be used how you need it, in any environment. ...

Wi-Fi 6 Mesh wireless access point, offering up to 1.8 Gbps dual-band total wireless capacity. Significantly boosts real world performance for both 2.4 & 5 G Hz Wi-Fi 6 clients. Dray Tek’s Mesh with VLAN capability can significantly reduce the cost of network deployments, improves coverage & eliminates Wi-Fi dead zones for homes & businesses. Quick to install & change configuration. The Dray Tek Wireless app simplifies setting up your network. Optionally configure & monitor through one of Dray Tek’s management platforms. High Speed connections even in locations without mains power. The AP 960C can be powered through its Gigabit Ethernet interface with standard IEEE 802.3af Po E or power the Vigor AP with an AC adapter. Suitable for ceiling & wall mounting. With a new matte finish, the AP 960C blends well with home & office interiors. Flexible & discrete installation, with option to disable status LED. The Dray Tek Vigor AP 960C is a Wi-Fi 6 access point with mesh facilities, offering up to 1.8 Gbps dual-band total wireless capacity. Wi-Fi 6 brings significantly enhanced efficiency, not only through its higher speed but by better allocating bandwidth, allowing more client capacity – especially useful with the huge increase in Wi-Fi clients within homes & offices. Improvements in reliability add to better overall performance compared to all previous standards. Dray Tek’s Mesh with VLAN capability can signifi cantly reduce the cost of network deployments, improves coverage & eliminates Wi-Fi dead zones for homes & businesses. ...

Key Features 8 Port Gigabit Managed Switch Ultra compact form factor Wall Mountable Fanless (Silent) Operation Ultra-low power consumption The Vigor Switch G1080 is a small, high-performance Gigabit smart switch designed for small & medium business networks that require simple network management, with support for VLANs, Qo S & Link Aggregation (increases uplink speed for high data volume applications). The G1080 is an ulta-low power device, consuming under 1A, even when fully loaded. It is powered by an AC/DC adaptor (included). Its a low cost device, ideal for adding additional Ethernet ports to your router with a small footprint. The Vigor Switch G1080 can be managed directly through its web interface, or can be installed in conjunction with a compatible Vigor router to expand the routers network, with the Vigor Switch G1080 managed & monitored through the Dray Tek Vigor routers web interface. Power from USB (Universal Serial Bus) If you have limited space or power sockets, the Vigor Switch G1080 can also be powered by USB (Universal Serial Bus)
- perhaps the USB (Universal Serial Bus) port on PC or one on your Dray Tek Vigor router**. Requires optional USB (Universal Serial Bus)-DC cable (part no. HVUSB1). Otherwise you can just power the device with the supplied AC/DC power supply. Central Management The Dray Tek Vigor Switch G1080 can operate in standalone mode & be managed through its web interface or, if you need to manage & monitor the switch remotely, or have several Dray Tek Vigor Switches to administer, you can centrally manage Vigor Switches on a site from the Dray Tek router which they are physically connected to. With Dray Tek Central Switch Management, connected Vigor Switches can be monitored, managed & provisioned simply by accessing the routers web interface, either locally or from across the Internet.
...

24+4 Port Gigabit Managed Switch 802.3az Power Saving 802.1q VLANs (Tag, Port & MAC-based) Qo S for Application traffic prioritisation Voice VLAN for Qo S (OUI Mode) The Vigor Switch G1280 is a high-performance, Gigabit smart switch with 24 RJ-45 ports (plus 4 additional Gigabit ports) The Vigor Switch G1280 features our latest generation of Dray Tek's own switch operating system which is used across our range of enhanced switches. This enables a consistent user-experience & look-&-feel so that once you're familiar with one model, the others feel the same. The new UI is designed to be intuitive & efficient, whilst providing access to all of the product's advanced features. Enhanced Feature Set The G1280's

Specification is packed with advanced features to aid reliability & switching performance to your network & is ready for the next generation with both IPv 4 & IPv 6 support. The G1280 has 24 standard (RJ45/copper) Gigabit Ethernet Ports, & four selectable ports (which can be set to either RJ-45 or SFP slots). Features for Quality of Service (Qo S), VLANs & network/switch security provide additional flexibility.

...

Product Description Draytek Vigor Switch G2100
- switch
- 8 ports
- Managed
- rack-mountable Device Type Switch
- 8




...

Key Features 802.3az Power Saving 802.1q VLANs (Tag, Port & MAC-based) Qo S for Application traffic prioritisation Voice VLAN for Qo S (OUI Mode) Access Control List (ACL) The Vigor Switch G2280 is a high-performance, Gigabit smart switch with 24 RJ-45 ports (plus 4 additional Gigabit ports). The Vigor Switch G2280 features our latest generation of Dray Teks own switch operating system which is used across our range of enhanced switches. This enables a consistent user-experience & look-&-feel so that once youre familiar with one model, the others feel the same. The new UI is designed to be intuitive & efficient, whilst providing access to all of the products advanced features. Enhanced Feature Set The G2280s

Specification is packed with advanced features to aid reliability & switching performance to your network & is ready for the next generation with both IPv 4 & IPv 6 support. The G2280 has 24 standard (RJ45/copper) Gigabit Ethernet Ports, & four selectable ports (which can be set to either RJ-45 or SFP slots). Features for Quality of Service (Qo S), VLANs & network/switch security provide additional flexibility.

...

The Vigor Switch G2500 is a high-performance, high port density, Managed Gigabit Ethernet switch. Connect up to 48 Ethernet devices to each switch, in a standard 1u rack mounted form factor, with 2 additional dedicated SFP ports for uplinks. The Vigor Switch G2500 is fanless for silent operation. Designed for centralised management, the Vigor Switch G2500 can be provisioned & monitored through both the Vigor ACS management platform and/or, a Dray Tek Vigor router’s Central Switch Management. Easily provision the VLAN configuration through the router & clone switch configurations. Drastically reduce the setup time required for a complex network, with VLANs spanning multiple switches. Use the 4 switchable SFP/RJ-45 ports & 2 dedicated SFP module slots to link with additional switches using link aggregation, or plug in a suitable SFP module to use optical Fibre as an Ethernet uplink. The Vigor Switch G2500s Serial (RS232) Console port & SSH server allow for configuration & management of the Vigor Switch through its fully featured command line interface (CLI). Designed for Centralised Management Can be configured & monitored instantly through both the Vigor ACS cloud management platform and/or, a Dray Tek Vigor routers central switch management. Benefits: saves your valuable time & money. Easily provision, monitor & manage remote sites without on-site IT or dedicated staff. Voice VLAN & Surveillance VLAN Automatically assign VLANs & Qo S configuration to devices with matching MAC address OUI upon connection to the switch. Benefits: Reduces broadcast traffic & allow more control when implementing security policies. Security DHCP Snooping: Limit DHCP server responses to only a specified port. IP Source Guard: Protects against address spoofing. Access Control List: Controls which packet types (IPv 4, IPv 6 & MAC) should pass between ports on the switch. Hardware Monitoring It monitors & controls the switchs temperature & operating voltages. Email notification alerts integrated for power loss, downtime or configuration changes. Benefits: Prevents network failure. Ensures high availability. ...

Vigor Switch G2540x 10 Gb E Gigabit Switch with 48 Gigabit Ports & 6 10 Gb E SFP+ Uplink Ports Vigor Switch G2540x is a 54 port Gigabit L2+ Managed switch with a plethora of management options & enterprise-level features to improve network stability & security for businesses. Use the 4 switchable SFP/RJ-45 ports & 2 dedicated SFP module slots to link with additional switches using link aggregation, or plug in a suitable SFP module to use optical Fibre as an Ethernet uplink. Designed for centralised management, the Vigor Switch G2540x can be provisioned & monitored through both the Vigor ACS management platform and/or, a Dray Tek Vigor router’s Central Switch Management. Easily provision the VLAN configuration through the router & clone switch configurations. Drastically reduce the setup time required for a complex network, with VLANs spanning multiple switches. ...

The Vigor Switch P1092 is a high-performance, Gigabit smart switch with Po E+ (Power over Ethernet) on 8 RJ-45 ports (plus 2 additional SFP ports). All 8 ports are full speed Gigabit (1000 Mb/s) Ethernet; as well as ensuring that your wired Ethernet devices get maximum speed, Gigabit on Po E is is particularly useful on a network where your Po E devices are providing Gigabit devices to a secondary device, for example IP phone to desktop PC using their loop/passthrough support if it supports Gigabit Ethernet. Of course, regular, non-Po E devices can connect to the switch so will also still take advantage of the Gigabit speed so ideal for a mixed environment. The P1092

Includes:: the rack mounting bracket/kit as standard. Po E Devices The Vigor Switch P1092 is a Po E (Power over Ethernet) switch, providing power to any Po E-enabled device, most commonly IP phones, wireless access points or IP cameras over the Ethernet cable. As well as removing the need for local (at the desk) power supplies, making for tidier installations, Po E ensures power efficiency, providing only the power needed. Power is provided only when required. Po E also allows for installation of devices where there is no mains power (particularly useful for wireless access points). The P1092 supports both standard Po E (802.3af) & High-Power Po E (802.3at) devices. Central Management* The Dray Tek Vigor Switch P1092 can operate in standalone mode & be managed through its web interface or you need to manage & monitor the switch remotely, or have several Dray Tek Vigor Switches to administer, you can centrally manage them with a Dray Tek router which supports switch management*. This allows a Dray Tek router which is directly connected to the switch to manage it. For details on this click the tabs at the top of the page. The Dray Tek Vigor Switch P1092 has 2 Gigabit SFP module ports (labelled 9 & 10) which can be used in addition to the 8 RJ-45 ports. SFP slots are typically used for fibre transceivers. In comparison to copper (RJ-45) cables, using fibre for connectivity provides longer range & resilience from electrical interference. The SFP ports provide compatibility with your choice of SFP modules (not included) & therefore the most appropriate medium for your application.

...