About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Draper Wet And
Dry Shampoo/vacuum
Cleaner Swd 1200.
£171.20
Draper 08101 1200W 230V Wet & Dry Shampoo/ Vacuum Cleaner Part No: SWD1200. Draper Part Number: 08101 This 3 in 1 vacuum features a spray extraction facility for valeting carpets, floors, upholstery & even hard surfaces such as tiles & laminate flooring. The detergent is supplied diluted with water in the form of a pressurized spray on to the surface to be cleaned. The liquid & dirt are then sucked out leaving the surface clean & practically dry. The cleaner is also designed to pick up & dry material. It has a 20L tank volume & 2L detergent capacity. Fitted with a BS approved 3 pin moulded plug & 4M (approx.) of cable. Display carton. The cleaner is supplied complete with the following: Cartridge filter, Foam filter, Paper dust bag 1.8M of flexible hose with hand grip & air control, Plastic retractable extension tube, Shampoo hose & trigger, Spray extraction floor attachment, Spray extraction upholstery attachment, Combination attachment for floors & carpets Furniture brush, Crevice nozzle 500ml shampoo. All accessories are 35mm diameter. ...
Available
DrayTek ANT-1005 5dBi Wireless LAN Aerial - Black
Dray Tek ANT-1005 5d Bi
Wireless LAN Aerial -
Black
£19.49
Antennae are an excellent way to cost effectively increase your wireless range. The Draytek ANT-1105 indoor 5d Bi Omni-directional Gain antennae can be used to improve the performance & extend the wireless range by up to 20% (LOS depends on the environment). To achieve the best possible wireless range, antennae should be installed at both the transmission (ie wireless access points) & reception ends (ie wireless clients). If used in both access point & client side performance, wireless coverage would increase by up to 50%! The performance for wireless is unpredictable, making it difficult for Broadband Buyer to say if wireless will be suitable in your home. If your home is larger than a modern three bedroom house or you live in an old victorian house then the Draytek indoor 5d Bi Omni-directional Gain antenna would give you the best possible opportunity to achieve the coverage area you desire. The antennae can be installed in devices such as wireless Access Points, wireless PCI cards & wireless routers that have SMA connectors ...
Available
Draytek ANT-1205B - 5dBi High-Gain Dual-Band Aerials - Black
Draytek ANT-1205B -
5d Bi High-Gain
Dual-Band Aerials
- Black
£14.13
High-Gain Dual-Band Antenna Pack The Dray Tek ANT-1205 is a replacement aerial (antenna) for any Dray Tek router or wireless access point. It provides up to a 5d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product). The ANT-1205 can increase coverage in your environment, creating a stronger signal for your Wi Fi coverage. A high-gain aerial achieves this by creating a narrower & therefore more concentrated radiation pattern. It is still an omnidirectional aerial, i.e. signal radiates in all directions (360 degrees) perpendicular to the aerial's length. The ANT-1205 is supplied as a pair of antennas, ideal for most Dray Tek wireless access points & wireless routers. The ANT-1205 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. Instead of mounting the aerials on the back of your router directly, you can use an optional magnetic base (Part Code: ANT-BAS1)
- useful if your router is in a rack or to get the best aerial position. The optional base can be wall mounted using suitable adhesive pads (e.g. 3M Command Strips). High-Gain Dual-Band Aerials Set of 2 Antennas Available in white or black Can improve range & coverage of wireless signal Suitable for all Dray Tek routers & access Points Suitable for 802.11ac & 802.11ax (Wi-Fi 6) Frequency Range: 2400-2500 Mhz & 5150-5850 Mhz 4.5d Bi Gain at 5.8 Ghz 5d Bi Gain at 2.4 Ghz Connector: RP-SMA Suitable for indoor use only Optional magnetic/extension base
...
Available
image missing
Draytek ANT-1205W -
5d Bi High-Gain
Dual-Band Aerials
- White
£14.99
High-Gain Dual-Band Antenna Pack The Dray Tek ANT-1205 is a replacement aerial (antenna) for any Dray Tek router or wireless access point. It provides up to a 5d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product). The ANT-1205 can increase coverage in your environment, creating a stronger signal for your Wi Fi coverage. A high-gain aerial achieves this by creating a narrower & therefore more concentrated radiation pattern. It is still an omnidirectional aerial, i.e. signal radiates in all directions (360 degrees) perpendicular to the aerial's length. The ANT-1205 is supplied as a pair of antennas, ideal for most Dray Tek wireless access points & wireless routers. The ANT-1205 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. Instead of mounting the aerials on the back of your router directly, you can use an optional magnetic base (Part Code: ANT-BAS1)
- useful if your router is in a rack or to get the best aerial position. The optional base can be wall mounted using suitable adhesive pads (e.g. 3M Command Strips). High-Gain Dual-Band Aerials Set of 2 Antennas Available in white or black Can improve range & coverage of wireless signal Suitable for all Dray Tek routers & access Points Suitable for 802.11ac & 802.11ax (Wi-Fi 6) Frequency Range: 2400-2500 Mhz & 5150-5850 Mhz 4.5d Bi Gain at 5.8 Ghz 5d Bi Gain at 2.4 Ghz Connector: RP-SMA Suitable for indoor use only Optional magnetic/extension base (ANT-BAS1)
...
Available
image missing
Dray Tek ANT-1207
7d Bi High-Gain
Dual-Band Aerial
£13.12
Dray Tek ANT-1207 is a replacement aerial (antenna) for any Dray Tek router or wireless access point. It provides up to a 7d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product). The ANT-1207 can increase coverage in your environment, creating a stronger signal for your Wi Fi coverage. A high-gain aerial achieves this by creating a narrower & therefore more concentrated radiation pattern. It is still an omnidirectional aerial, i.e. signal radiates in all directions (360 degrees) perpendicular to the aerials length. The ANT-1207 is supplied singly; you can purchase 2, 3 or 4 to suit your router or access point
- it is recommended that all aerials on your router are the same type. The ANT-1207 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial twists & can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. Instead of mounting the aerials on the back of your router directly, you can use an optional magnetic base (Part Code: ANT-BAS1)
- useful if your router is in a rack or to get the best aerial position. The optional base can be wall mounted using suitable adhesive pads (e.g. 3M Comand Strips).

...
Available
DrayTek ANT-BAS4G Mag Bases & 1M Ext for 4G Aerial
Dray Tek ANT-BAS4G Mag
Bases & 1M Ext For
4G Aerial
£20.99
This product is a magnetic base and extension cable compatible with the LTE antennae included with Dray Tek Vigor routers that integrate an LTE modem, such as the Vigor 2620 Ln. This allows your aerials to be positioned to avoid any obstructions or enclosures which are obscuring the router. Adjust the LTE antennas into the optimum location / direction to increase signal strength & throughput. This is especially useful if the router is installed in a rack inside a comms cabinet because if the aerials are inside the cabinet their signal will be severely impeded. The 1M extension cable allows the aerials to be positioned outside of the cabinet & the magnetic base means that it can be attached to the side of a cabinet if the metal is magnetic. The magnetic antenna bases are supplied in pairs, purchase a single set to extend the antenna positions for both of the routers antennae. The antenna is not included
- that is supplied with your 4G/LTE rouiter. The LTE antenna aerials supplied with Dray Tek LTE modem routers can twist & tilt at their base, which allows for optimum positioning once connected to the ANT-BAS1 base. Key Features Magnetic base 1M Extension cable Kit
Includes: 2 extension bases Extend 4G LTE aerials away from the router Allows aerials to be located in the optimum position Compatible with Dray Tek Vigor routers with integrated LTE modems Suitable for use with all 4G LTE & 3G frequency bands in use in the UK Available in black only Suitable for indoor use only Can be wall mounted (use 3M Command strips, not included)

...
Available
image missing
Draytek ANT2520 -
10d Bi High-Gain
Unidirectional Dual-Band
Aerial
£18.99
High-Gain Aerial Dual-Band Compatible (2.4 Ghz & 5.8 Ghz) Unidirectional Signal Coverage Suitable for all Dray Tek routers & access Points Compatible with 802.11a, b, g, n & 802.11ac Frequency Range: 2400-2500 Mhz & 5150-5850 Mhz 7.5d Bi Gain in horizontal plane (5.8 Ghz) 10d Bi Gain in horizontal plane (2.4 Ghz) HPBW: 70 ° / 60 ° (H/V @ 2.4 Ghz) HPBW: 60 ° / 30 ° (H/V @ 5 Ghz) Optional Magnetic base (ANT-BAS1) or fit directly to router/AP Available in black only. Indoor use only. The Dray Tek ANT-2520 is a replacement aerial for any Dray Tek router or wireless access point. It provides up to a 10d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product) in one direction
- i.e. the router or access point's wireless signal is concentrated more in one direction rather than being spread equally in all directions (omnidirectional
- like the standard included aerials). The ANT-2520 can increase coverage in your environment, by creating a narrower & therefore more concentrated radiation pattern. The ANT-2520 is supplied singly; you can purchase 2, 3 or 4 to suit your router or access point
- it is recommended that all aerials on your router are the same type though some devices allow the use of less aerials than there are sockets. You can use less than 3, but all TX/RX sockets must be populated. The ANT-2520 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial twists 90 degrees left or right & can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. You can also use an optional magnetic base
- useful if your router is in a rack, or the optional base can be wall mounted using suitable adhesive pads (e.g. 3M Command Strips).



...
Available
image missing
Draytek CAB-LTEA5 -
Coaxial Cable - 5M SMA
RG-58AU Black
£10.49
Draytek CAB-LTEA5 coaxial cable 5 m SMA RG-58AU Black ...
Available
DrayTek DCX101 CX10 SFP DAC Cable 1M
Dray Tek DCX101 CX10
SFP DAC Cable 1M
£19.98
Key Features SFP & SFP+ Direct Attach Cable Self-Locking on insertion for reliable installation Pull-Tab for easy removal 1 Gb E & 10 Gb E Capable Available in 1 Meter & 3 Meter Cable Lengths SFP Direct Attach Cable for Switch Uplinks Use Dray Tek DAC-CX10 SFP cables to connect directly to the SFP module port of a Dray Tek switch or router, such as the Dray Tek Vigor Switch P2500 50-port switch & Dray Tek Vigor 3900 router. The DAC-CX10 cable is a cost effective interlink cable between switches, routers & servers, with throughput from 1 Gigabit per second, up to 10 Gigabits per second depending on the devices being connected. A " Direct Attach Cable" or "DAC" connects SFP module ports on two devices similarly to an RJ-45 network cable, instead of using SFP to optical fiber transceivers, or SFP to RJ-45 transceivers. This significantly simplifies the connection process & reduces cost, while still ensuring reliable operation. For instance, if both devices support 10 Gigabit transfer rates through SFP+, instead of using two SFP+ Fiber transceivers & optical fiber, simply connect the DAC-CX10-01M cable between the two for an up to 10 Gbps link. The DAC-CX10 is available in 3 Meter & 1 Meter cable length variants, with its cable shielded to protect from nearby electrical interference. The SFP module locks securely into place when fitted into a switch to avoid unintended removal. Remove the DAC-CX10 by pulling the attached pull-tab to unlock it from the SFP module slot. ...
Available
image missing
Dray Tek DCX103 CX10
SFP DAC Cable 3M
£21.48
Key Features SFP & SFP+ Direct Attach Cable Self-Locking on insertion for reliable installation Pull-Tab for easy removal 1 Gb E & 10 Gb E Capable Available in 1 Meter & 3 Meter Cable Lengths SFP Direct Attach Cable for Switch Uplinks Use Dray Tek DAC-CX10 SFP cables to connect directly to the SFP module port of a Dray Tek switch or router, such as the Dray Tek Vigor Switch P2500 50-port switch & Dray Tek Vigor 3900 router. The DAC-CX10 cable is a cost effective interlink cable between switches, routers & servers, with throughput from 1 Gigabit per second, up to 10 Gigabits per second depending on the devices being connected. A " Direct Attach Cable" or "DAC" connects SFP module ports on two devices similarly to an RJ-45 network cable, instead of using SFP to optical fiber transceivers, or SFP to RJ-45 transceivers. This significantly simplifies the connection process & reduces cost, while still ensuring reliable operation. For instance, if both devices support 10 Gigabit transfer rates through SFP+, instead of using two SFP+ Fiber transceivers & optical fiber, simply connect the DAC-CX10-01M cable between the two for an up to 10 Gbps link. The DAC-CX10 is available in 3 Meter & 1 Meter cable length variants, with its cable shielded to protect from nearby electrical interference. The SFP module locks securely into place when fitted into a switch to avoid unintended removal. Remove the DAC-CX10 by pulling the attached pull-tab to unlock it from the SFP module slot. ...
Available

Draytek ANT-4GE1-K - Network Antenna 6 DBi - Omni-directional Antenna
N-type

Outdoor 4G Antenna for DrayTek LTE Routers 4G/LTE routers such as the DrayTek Vigor 2862Lac can provide highly resilient connectivity by utilising mobile broadband, either as the main Internet connection or as a backup connection for the building. The Outdoor 4G Antennas for DrayTek LTE Routers can improve 4G, 3G & LTE signal reception for any DrayTek Vigor LTE router, expanding coverage and improving speeds, by allowing you to locate the antenna in a location which receives a strong signal. Installation of outdoor antennas enables or improves 4G/LTE connectivity into locations where it’s typically inaccessible. For instance, in a comms cabinet, or in parts of a building that otherwise cannot receive mobile signal, due to building layout or location. Simply placing the
antennas physically outdoors normally provides a significant signal boost over what can be achieved within a building, potentially improving speeds through better access to LTE bands and nearby mobile cell towers. The antennae can also be installed inside a building, perhaps just run outside the location/room which has poor coverage. The Outdoor 4G Antennas for DrayTek LTE Routers support all currently used 4G, 3G and 2G frequency bands from 700MHz to 2.7GHz. The antennas are Omni-Directional, designed for vertical orientation to receive signal from any nearby mobile cell tower, without requiring careful or sensitive aiming during installation. Install a pair of Outdoor 4G Antennas around 0.5m to 1m apart to enable the MIMO (Multiple In, Multiple Out) capability of 4G & LTE
wireless networks, further improving speeds and connection resilience. For best results, separate the antennas horizontally in built-up areas and vertically in open areas. The Outdoor 4G Antennas for DrayTek LTE Routers are weatherproof and ideal for permanent outdoor installation either on a pole or wall. Fixings are provided suitable for either (poles not included). The N-type connector on each antenna provides a secure and weather resistant antenna connection, which links to the router’s SMA antenna connectors with a suitable cable. Each Outdoor 4G Antenna requires an N-plug to SMA cable for installation, such as our own 5 metre cable (model: CAB-LTEA5, supplied separately). You can use your own shorter or longer cables instead, ensuring the right connectors and always keep
cable lengths to a minimum to avoid unncessary signal loss.
Buy
  • Availability: In Stock
  • Supplier: Ebuyer
  • SKU: 991381
Availability: In Stock
£42.48
projectors B2C_2
Description Reviews / Comments Add New

Product Description

Outdoor 4G Antenna for Dray Tek LTE Routers 4G/LTE routers such as the Dray Tek Vigor 2862 Lac can provide highly resilient connectivity by utilising mobile broadb&, either as the main Internet connection or as a backup connection for the building. The Outdoor 4G Antennas for Dray Tek LTE Routers can improve 4G, 3G & LTE signal reception for any Dray Tek Vigor LTE router, expanding coverage & improving speeds, by allowing you to locate the antenna in a location which receives a strong signal. Installation of outdoor antennas enables or improves 4G/LTE connectivity into locations where it’s typically inaccessible. For instance, in a comms cabinet, or in parts of a building that otherwise cannot receive mobile signal, due to building layout or location. Simply placing the antennas physically outdoors normally provides a significant signal boost over what can be achieved within a building, potentially improving speeds through better access to LTE bands & nearby mobile cell towers. The antennae can also be installed inside a building, perhaps just run outside the location/room which has poor coverage. The Outdoor 4G Antennas for Dray Tek LTE Routers support all currently used 4G, 3G & 2G frequency bands from 700 M Hz to 2.7 G Hz. The antennas are Omni-Directional, designed for vertical orientation to receive signal from any nearby mobile cell tower, without requiring careful or sensitive aiming during installation. Install a pair of Outdoor 4G Antennas around 0.5m to 1m apart to enable the MIMO (Multiple In, Multiple Out) capability of 4G & LTE wireless networks, further improving speeds & connection resilience. For best results, separate the antennas horizontally in built-up areas & vertically in open areas. The Outdoor 4G Antennas for Dray Tek LTE Routers are weatherproof & ideal for permanent outdoor installation either on a pole or wall. Fixings are provided suitable for either (poles not included). The N-type connector on each antenna provides a secure & weather resistant antenna connection, which links to the router’s SMA antenna connectors with a suitable cable. Each Outdoor 4G Antenna requires an N-plug to SMA cable for installation, such as our own 5 metre cable (model: CAB-LTEA5, supplied separately). You can use your own shorter or longer cables instead, ensuring the right connectors & always keep cable lengths to a minimum to avoid unncessary signal loss.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Frequency - A term used to describe how often something is done
Frequency - A wave frequency is the number of times a wave repeats within a given time
strong - A descriptive word for an item that has physical strength
Cable - A series of wires bonded to form a single thread
Wall - A physical barrier between two areas
Weather - is the change of an atmospheres conditions.
Network - A link and communication between things. Often computers or people.
Permanent - Something that is long term and most likely to be around forever.
Reception - An atmosphere from a group of people, a radio sound frequency quality.
Resistant - Something that can repel against something.
Metre - 100cm. A unit of length.
Install - A process of putting materials together to create a finished product.
Fixings - An action of sticking an item to another surface.
Wireless - A wire free device that uses radio and microwaves to send signals.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Ebuyer
Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.
Page Updated: 2024-03-04 12:41:25

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu