Power pack ideal for petrol vehicles up to 2000cc & diesel vehicles up to 1800cc. On/off power switch, voltmeter with battery charge & reverse polarity indicators. Heavy duty booster cables with insulated jaws. DC power socket allows the running of 12V/DC accessories to a maximum current of 15A. Integral air compressor with pressure gauge, hose & popular adaptors. Rechargeable through a 230V AC supply or a 12V vehicle cigarette lighter socket. Display carton. ...

Draper Targa Draper Targa electric projection screen. 92" diagonal (16:9) Viewing Area 203cm x 114cm. Matt White front projection surface with black borders
- Overall Surface

Dimensions 212cm x 145cm
- White steel case 15cm high x 13.4cm deep
- 220v motor
- Optional control with SOMFY-IR-KIT or SOMFY-RF-KIT or SOMFY-CD4 also available Features Screen Type Electric Viewing Area (Wx H) cm 203 x 114 Format 16:9 Fabric Matt White





...

Sizes available are listed in charts below & depend on surface selected. Screen operates instantly at the touch of a button & stops automatically in the "up" & "down" positions. Viewing surface can be lowered to any position at the touch of a switch. NTSC, HDTV & 16:10 format screens have black borders on all four sides Available with a ceiling trim kit for ceiling recessed installation. With control options, it can be operated from any remote location. Depending on surface, available in sizes through 16' x 16' & 240" NTSC. Custom sizes available. Warranted for one year against defects in materials & workmanship. Plug & Play with built-in Low Voltage Controller (LP) & Plug & Play with built-in Quiet & Low Voltage Controller are now available (QLP). For more information click on the Quiet Motor link in the Related Products & Accessories section below. ...

Draper 08101 1200W 230V Wet & Dry Shampoo/ Vacuum Cleaner Part No: SWD1200. Draper Part Number: 08101 This 3 in 1 vacuum features a spray extraction facility for valeting carpets, floors, upholstery & even hard surfaces such as tiles & laminate flooring. The detergent is supplied diluted with water in the form of a pressurized spray on to the surface to be cleaned. The liquid & dirt are then sucked out leaving the surface clean & practically dry. The cleaner is also designed to pick up & dry material. It has a 20L tank volume & 2L detergent capacity. Fitted with a BS approved 3 pin moulded plug & 4M (approx.) of cable. Display carton. The cleaner is supplied complete with the following: Cartridge filter, Foam filter, Paper dust bag 1.8M of flexible hose with hand grip & air control, Plastic retractable extension tube, Shampoo hose & trigger, Spray extraction floor attachment, Spray extraction upholstery attachment, Combination attachment for floors & carpets Furniture brush, Crevice nozzle 500ml shampoo. All accessories are 35mm diameter. ...

Antennae are an excellent way to cost effectively increase your wireless range. The Draytek ANT-1105 indoor 5d Bi Omni-directional Gain antennae can be used to improve the performance & extend the wireless range by up to 20% (LOS depends on the environment). To achieve the best possible wireless range, antennae should be installed at both the transmission (ie wireless access points) & reception ends (ie wireless clients). If used in both access point & client side performance, wireless coverage would increase by up to 50%! The performance for wireless is unpredictable, making it difficult for Broadband Buyer to say if wireless will be suitable in your home. If your home is larger than a modern three bedroom house or you live in an old victorian house then the Draytek indoor 5d Bi Omni-directional Gain antenna would give you the best possible opportunity to achieve the coverage area you desire. The antennae can be installed in devices such as wireless Access Points, wireless PCI cards & wireless routers that have SMA connectors ...

High-Gain Dual-Band Antenna Pack The Dray Tek ANT-1205 is a replacement aerial (antenna) for any Dray Tek router or wireless access point. It provides up to a 5d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product). The ANT-1205 can increase coverage in your environment, creating a stronger signal for your Wi Fi coverage. A high-gain aerial achieves this by creating a narrower & therefore more concentrated radiation pattern. It is still an omnidirectional aerial, i.e. signal radiates in all directions (360 degrees) perpendicular to the aerial's length. The ANT-1205 is supplied as a pair of antennas, ideal for most Dray Tek wireless access points & wireless routers. The ANT-1205 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. Instead of mounting the aerials on the back of your router directly, you can use an optional magnetic base (Part Code: ANT-BAS1)
- useful if your router is in a rack or to get the best aerial position. The optional base can be wall mounted using suitable adhesive pads (e.g. 3M Command Strips). High-Gain Dual-Band Aerials Set of 2 Antennas Available in white or black Can improve range & coverage of wireless signal Suitable for all Dray Tek routers & access Points Suitable for 802.11ac & 802.11ax (Wi-Fi 6) Frequency Range: 2400-2500 Mhz & 5150-5850 Mhz 4.5d Bi Gain at 5.8 Ghz 5d Bi Gain at 2.4 Ghz Connector: RP-SMA Suitable for indoor use only Optional magnetic/extension base (ANT-BAS1)
...

Dray Tek ANT-1207 is a replacement aerial (antenna) for any Dray Tek router or wireless access point. It provides up to a 7d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product). The ANT-1207 can increase coverage in your environment, creating a stronger signal for your Wi Fi coverage. A high-gain aerial achieves this by creating a narrower & therefore more concentrated radiation pattern. It is still an omnidirectional aerial, i.e. signal radiates in all directions (360 degrees) perpendicular to the aerials length. The ANT-1207 is supplied singly; you can purchase 2, 3 or 4 to suit your router or access point
- it is recommended that all aerials on your router are the same type. The ANT-1207 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial twists & can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. Instead of mounting the aerials on the back of your router directly, you can use an optional magnetic base (Part Code: ANT-BAS1)
- useful if your router is in a rack or to get the best aerial position. The optional base can be wall mounted using suitable adhesive pads (e.g. 3M Comand Strips).

...

Outdoor 4G Antenna for Dray Tek LTE Routers 4G/LTE routers such as the Dray Tek Vigor 2862 Lac can provide highly resilient connectivity by utilising mobile broadb&, either as the main Internet connection or as a backup connection for the building. The Outdoor 4G Antennas for Dray Tek LTE Routers can improve 4G, 3G & LTE signal reception for any Dray Tek Vigor LTE router, expanding coverage & improving speeds, by allowing you to locate the antenna in a location which receives a strong signal. Installation of outdoor antennas enables or improves 4G/LTE connectivity into locations where it’s typically inaccessible. For instance, in a comms cabinet, or in parts of a building that otherwise cannot receive mobile signal, due to building layout or location. Simply placing the antennas physically outdoors normally provides a significant signal boost over what can be achieved within a building, potentially improving speeds through better access to LTE bands & nearby mobile cell towers. The antennae can also be installed inside a building, perhaps just run outside the location/room which has poor coverage. The Outdoor 4G Antennas for Dray Tek LTE Routers support all currently used 4G, 3G & 2G frequency bands from 700 M Hz to 2.7 G Hz. The antennas are Omni-Directional, designed for vertical orientation to receive signal from any nearby mobile cell tower, without requiring careful or sensitive aiming during installation. Install a pair of Outdoor 4G Antennas around 0.5m to 1m apart to enable the MIMO (Multiple In, Multiple Out) capability of 4G & LTE wireless networks, further improving speeds & connection resilience. For best results, separate the antennas horizontally in built-up areas & vertically in open areas. The Outdoor 4G Antennas for Dray Tek LTE Routers are weatherproof & ideal for permanent outdoor installation either on a pole or wall. Fixings are provided suitable for either (poles not included). The N-type connector on each antenna provides a secure & weather resistant antenna connection, which links to the router’s SMA antenna connectors with a suitable cable. Each Outdoor 4G Antenna requires an N-plug to SMA cable for installation, such as our own 5 metre cable (model: CAB-LTEA5, supplied separately). You can use your own shorter or longer cables instead, ensuring the right connectors & always keep cable lengths to a minimum to avoid unncessary signal loss. ...

This product is a magnetic base and extension cable compatible with the LTE antennae included with Dray Tek Vigor routers that integrate an LTE modem, such as the Vigor 2620 Ln. This allows your aerials to be positioned to avoid any obstructions or enclosures which are obscuring the router. Adjust the LTE antennas into the optimum location / direction to increase signal strength & throughput. This is especially useful if the router is installed in a rack inside a comms cabinet because if the aerials are inside the cabinet their signal will be severely impeded. The 1M extension cable allows the aerials to be positioned outside of the cabinet & the magnetic base means that it can be attached to the side of a cabinet if the metal is magnetic. The magnetic antenna bases are supplied in pairs, purchase a single set to extend the antenna positions for both of the routers antennae. The antenna is not included
- that is supplied with your 4G/LTE rouiter. The LTE antenna aerials supplied with Dray Tek LTE modem routers can twist & tilt at their base, which allows for optimum positioning once connected to the ANT-BAS1 base. Key Features Magnetic base 1M Extension cable Kit
Includes: 2 extension bases Extend 4G LTE aerials away from the router Allows aerials to be located in the optimum position Compatible with Dray Tek Vigor routers with integrated LTE modems Suitable for use with all 4G LTE & 3G frequency bands in use in the UK Available in black only Suitable for indoor use only Can be wall mounted (use 3M Command strips, not included)

...

High-Gain Aerial Dual-Band Compatible (2.4 Ghz & 5.8 Ghz) Unidirectional Signal Coverage Suitable for all Dray Tek routers & access Points Compatible with 802.11a, b, g, n & 802.11ac Frequency Range: 2400-2500 Mhz & 5150-5850 Mhz 7.5d Bi Gain in horizontal plane (5.8 Ghz) 10d Bi Gain in horizontal plane (2.4 Ghz) HPBW: 70 ° / 60 ° (H/V @ 2.4 Ghz) HPBW: 60 ° / 30 ° (H/V @ 5 Ghz) Optional Magnetic base (ANT-BAS1) or fit directly to router/AP Available in black only. Indoor use only. The Dray Tek ANT-2520 is a replacement aerial for any Dray Tek router or wireless access point. It provides up to a 10d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product) in one direction
- i.e. the router or access point's wireless signal is concentrated more in one direction rather than being spread equally in all directions (omnidirectional
- like the standard included aerials). The ANT-2520 can increase coverage in your environment, by creating a narrower & therefore more concentrated radiation pattern. The ANT-2520 is supplied singly; you can purchase 2, 3 or 4 to suit your router or access point
- it is recommended that all aerials on your router are the same type though some devices allow the use of less aerials than there are sockets. You can use less than 3, but all TX/RX sockets must be populated. The ANT-2520 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial twists 90 degrees left or right & can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. You can also use an optional magnetic base
- useful if your router is in a rack, or the optional base can be wall mounted using suitable adhesive pads (e.g. 3M Command Strips).



...