Since 1912 Draper 09862 (H6-mm) Draper Expert 16 mm. 1/2" Square Drive 6pt Draper Expert Hi-torq Metric Socket Expert Quality, 6 point sockets manufactured from chrome vanadium steel hardened, tempered & satin chrome plated with knurled ring for extra grip. Chamfered ends allow positive nut location. ...

Electronic mini kits are easy to assemble & provide fun as well as functionality when building is complete. Perfect projects for electronics students, scouts, & beginner skill level electronics enthusiasts. Mini kits come with clear instructions. Simple hand tools like side cutters, safety glasses, & soldering iron are all that is required for assembly ...

For cleaning of motorcycle chains whilst in-situ. Comprises bottle for holding cleaning fluid plastic tube, Y piece adaptor & chain bath with cleaning brushes. Easy set up; bath is clamped over chain & the bottle connected to bath via plastic tubes & chain cleaned. Waste fluid is then drained away. ...

Power pack ideal for petrol vehicles up to 2000cc & diesel vehicles up to 1800cc. On/off power switch, voltmeter with battery charge & reverse polarity indicators. Heavy duty booster cables with insulated jaws. DC power socket allows the running of 12V/DC accessories to a maximum current of 15A. Integral air compressor with pressure gauge, hose & popular adaptors. Rechargeable through a 230V AC supply or a 12V vehicle cigarette lighter socket. Display carton. ...

Draper Targa Draper Targa electric projection screen. 92" diagonal (16:9) Viewing Area 203cm x 114cm. Matt White front projection surface with black borders
- Overall Surface

Dimensions 212cm x 145cm
- White steel case 15cm high x 13.4cm deep
- 220v motor
- Optional control with SOMFY-IR-KIT or SOMFY-RF-KIT or SOMFY-CD4 also available Features Screen Type Electric Viewing Area (Wx H) cm 203 x 114 Format 16:9 Fabric Matt White





...

Draper 08101 1200W 230V Wet & Dry Shampoo/ Vacuum Cleaner Part No: SWD1200. Draper Part Number: 08101 This 3 in 1 vacuum features a spray extraction facility for valeting carpets, floors, upholstery & even hard surfaces such as tiles & laminate flooring. The detergent is supplied diluted with water in the form of a pressurized spray on to the surface to be cleaned. The liquid & dirt are then sucked out leaving the surface clean & practically dry. The cleaner is also designed to pick up & dry material. It has a 20L tank volume & 2L detergent capacity. Fitted with a BS approved 3 pin moulded plug & 4M (approx.) of cable. Display carton. The cleaner is supplied complete with the following: Cartridge filter, Foam filter, Paper dust bag 1.8M of flexible hose with hand grip & air control, Plastic retractable extension tube, Shampoo hose & trigger, Spray extraction floor attachment, Spray extraction upholstery attachment, Combination attachment for floors & carpets Furniture brush, Crevice nozzle 500ml shampoo. All accessories are 35mm diameter. ...

Antennae are an excellent way to cost effectively increase your wireless range. The Draytek ANT-1105 indoor 5d Bi Omni-directional Gain antennae can be used to improve the performance & extend the wireless range by up to 20% (LOS depends on the environment). To achieve the best possible wireless range, antennae should be installed at both the transmission (ie wireless access points) & reception ends (ie wireless clients). If used in both access point & client side performance, wireless coverage would increase by up to 50%! The performance for wireless is unpredictable, making it difficult for Broadband Buyer to say if wireless will be suitable in your home. If your home is larger than a modern three bedroom house or you live in an old victorian house then the Draytek indoor 5d Bi Omni-directional Gain antenna would give you the best possible opportunity to achieve the coverage area you desire. The antennae can be installed in devices such as wireless Access Points, wireless PCI cards & wireless routers that have SMA connectors ...

High-Gain Dual-Band Antenna Pack The Dray Tek ANT-1205 is a replacement aerial (antenna) for any Dray Tek router or wireless access point. It provides up to a 5d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product). The ANT-1205 can increase coverage in your environment, creating a stronger signal for your Wi Fi coverage. A high-gain aerial achieves this by creating a narrower & therefore more concentrated radiation pattern. It is still an omnidirectional aerial, i.e. signal radiates in all directions (360 degrees) perpendicular to the aerial's length. The ANT-1205 is supplied as a pair of antennas, ideal for most Dray Tek wireless access points & wireless routers. The ANT-1205 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. Instead of mounting the aerials on the back of your router directly, you can use an optional magnetic base (Part Code: ANT-BAS1)
- useful if your router is in a rack or to get the best aerial position. The optional base can be wall mounted using suitable adhesive pads (e.g. 3M Command Strips). High-Gain Dual-Band Aerials Set of 2 Antennas Available in white or black Can improve range & coverage of wireless signal Suitable for all Dray Tek routers & access Points Suitable for 802.11ac & 802.11ax (Wi-Fi 6) Frequency Range: 2400-2500 Mhz & 5150-5850 Mhz 4.5d Bi Gain at 5.8 Ghz 5d Bi Gain at 2.4 Ghz Connector: RP-SMA Suitable for indoor use only Optional magnetic/extension base
...

High-Gain Dual-Band Antenna Pack The Dray Tek ANT-1205 is a replacement aerial (antenna) for any Dray Tek router or wireless access point. It provides up to a 5d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product). The ANT-1205 can increase coverage in your environment, creating a stronger signal for your Wi Fi coverage. A high-gain aerial achieves this by creating a narrower & therefore more concentrated radiation pattern. It is still an omnidirectional aerial, i.e. signal radiates in all directions (360 degrees) perpendicular to the aerial's length. The ANT-1205 is supplied as a pair of antennas, ideal for most Dray Tek wireless access points & wireless routers. The ANT-1205 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. Instead of mounting the aerials on the back of your router directly, you can use an optional magnetic base (Part Code: ANT-BAS1)
- useful if your router is in a rack or to get the best aerial position. The optional base can be wall mounted using suitable adhesive pads (e.g. 3M Command Strips). High-Gain Dual-Band Aerials Set of 2 Antennas Available in white or black Can improve range & coverage of wireless signal Suitable for all Dray Tek routers & access Points Suitable for 802.11ac & 802.11ax (Wi-Fi 6) Frequency Range: 2400-2500 Mhz & 5150-5850 Mhz 4.5d Bi Gain at 5.8 Ghz 5d Bi Gain at 2.4 Ghz Connector: RP-SMA Suitable for indoor use only Optional magnetic/extension base (ANT-BAS1)
...

Dray Tek ANT-1207 is a replacement aerial (antenna) for any Dray Tek router or wireless access point. It provides up to a 7d Bi gain (vs. the 2 or 3 d Bi standard aerial supplied with the product). The ANT-1207 can increase coverage in your environment, creating a stronger signal for your Wi Fi coverage. A high-gain aerial achieves this by creating a narrower & therefore more concentrated radiation pattern. It is still an omnidirectional aerial, i.e. signal radiates in all directions (360 degrees) perpendicular to the aerials length. The ANT-1207 is supplied singly; you can purchase 2, 3 or 4 to suit your router or access point
- it is recommended that all aerials on your router are the same type. The ANT-1207 is a dual band aerial so can be used for either 2.4 Ghz or 5.8 Ghz operation, or both simultaneously. It is also suitable for 802.11ac operation (5.8 Ghz). The aerial twists & can tilt at its base to allow for optimum coverage/spread, or to allow for router wall mounting. Instead of mounting the aerials on the back of your router directly, you can use an optional magnetic base (Part Code: ANT-BAS1)
- useful if your router is in a rack or to get the best aerial position. The optional base can be wall mounted using suitable adhesive pads (e.g. 3M Comand Strips).

...