About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Trend C024ax 1/4tc
Straight Cutter 1/4
Tct
£13.49
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=19/32 inch. D=15 mm. Cut length=63/64 inch. Cut length=25 mm. Shank Diameter=1/4 inch. ...
Archived Product
Trend C041 Router Cutter 1/4 Shank Tc
Trend C041 Router
Cutter 1/4 Shank Tc
£11.99
These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table shows angles from the horizontal & the profiles show angles from the vertical. D=1/2 inch. D=12.7 mm. Cut length=1/2 inch. Cut length=12.7 mm. Overall length=46 mm. A=104 degrees. Shank Diameter=1/4 inch. ...
Archived Product
image missing
Trend C049 X 1/4
Tungsten Carbide Self
Guided Chamfer
£19.49
Chamfer, V Groove Cutters These types of cutter are used for edging & chamfer cutting on man-made fibre boards natural timbers & plastics. Tools are offered to produce various angles for engraving chamfering & V grooving. Ball bearing & pin guided cutters enable curved work to be undertaken bearings running along the board edge or a template. Typical trade applications include sign making freehand engraving cabinet making & decorative joinery. A range of valuable self-guiding chamfer/bevel cutters. Bearing follows the board beneath. T.C.T. Shank. = 1/4 in. C = 12.7 mm. B = 9.5 mm. Angel = 45. ...
Archived Product
Trend C058 Router Cutter 1/4 Shank Tc
Trend C058 Router
Cutter 1/4 Shank Tc
£20.50
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes & board edges. For deep channels, take a series of passes. Ref. C056A is used with the Trend Draining Groove Jig. D=1 inch. D=25.4 mm. Cut length=5/8 inch. Cut length=15.9 mm. Overall length=56.5 mm. R=12.7 mm. Shank Diameter=1/4 inch. ...
Archived Product
Trend C079 Router Cutter 1/4 Shank Tc
Trend C079 Router
Cutter 1/4 Shank Tc
£29.00
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D=38.0 mm. Cut length=3/4 inch. Cut length=19.1 mm. B=9.5 mm. B2=12.7 mm. R=1/2 inch. R=12.7 mm. Shank Diameter=1/4 inch. ...
Archived Product
Trend C145 X 1/4 Tungsten Carbide Slotting Cutter 6.3mm
Trend C145 X 1/4
Tungsten Carbide
Slotting Cutter 6.3mm
£18.50
This two wing slotting cutter is ideal for grooving & rebating operations. A 1/2 in diameter bearing is supplied with every cutter. Depth of cut can be changed by purchasing alternative bearing sizes. T.C.T. Shank = 1/4 in. C = 6.3 mm. (Slots) Depth with standard cutter = 3/8 in. ...
Archived Product
image missing
Trend C152 X 1/2
Tungsten Carbide
Biscuit Joiner Set
£27.50
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Supplied with instructions. No. 0
- 45 mm. x 15 mm. x 4 mm. Suitable for 8-12 mm. boards Use bearing B19A 9.05 mm. depth. No. 10
- 53 mm. x 19 mm. x 4 mm. Suitable for 13-18 mm. boards Use bearing B16A 10.6 mm. depth. No. 20
- 58 mm. x 23 mm. x 4 mm. Suitable for 19 mm. +- board Use bearing B127AD1 37.2 mm. Cut length 4 mm. B 12.7 mm. B2 16.0 mm. B3 19.0 mm. Shank = 1/2 in.


...
Archived Product
Trend C152 X 1/4 Tungsten Carbide Biscuit Jointer Set
Trend C152 X 1/4
Tungsten Carbide
Biscuit Jointer Set
£27.50
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Supplied with instructions. No. 0
- 45 mm. x 15 mm. x 4 mm. Suitable for 8-12 mm. boards Use bearing B19A 9.05 mm. depth. No. 10
- 53 mm. x 19 mm. x 4 mm. Suitable for 13-18 mm. boards Use bearing B16A 10.6 mm. depth. No. 20
- 58 mm. x 23 mm. x 4 mm. Suitable for 19 mm. +- board Use bearing B127AD1 37.2 mm. Cut length 4 mm. B 12.7 mm. B2 16.0 mm. B3 19.0 mm. Shank = 1/4 in.


...
Archived Product
image missing
Trend C153d X 1/2tc
Worktop Cutter
£19.00
Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving grooving rebating & shallow mortising. They can be used on a wide range of materials such as softwoods hardwoods MDF plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required more than one pass should be taken. Shank. 1/4 in. Suitable for a wide range of applications such as engraving grooving rebating & shallow mortising. Use on softwoods hardwoods MDF plywood & chipboard. All cutters have a bottom cut feature. D1 1/2 inch D1 12.7 mm. Cut length 2 inches Cut length 50 mm. Shank Diameter 1/2 inch. ...
Archived Product
Trend C172x1/2tc Straight Cutter 1/2 Tct
Trend C172x 1/2tc
Straight Cutter 1/2
Tct
£18.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=15/32 inch. D=12 mm. Cut length=2 1/2 inches. Cut length=63 mm. Shank Diameter=1/2 inch. ...
Archived Product

Trend C130 X 1/4 Tungsten Carbide Corner Bead

Attractive edge moulds a full corner bead can be produced by making a second pass at 90. Used on all man-made boards such as medium density fibre board chipboard and also natural timbers and most plastics. T.C.T. Shank = 1/4 in. R = 4.8 mm. D = 26 mm. d = 22 mm. C = 16 mm. B = 15.9 mm. Craft Range - They can be used on all man-made boards such as medium density fibre board chipboard and also natural timbers and most plastics. Bead, Reed Cutters Bead and Reed cutters are ideally suited to form straight or curved decorative edge mouldings on table tops chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications. Certain staff bead
cutters are used to join boards and produce hinged joints for table tops.
RIP - This product is no longer available on our network. It was last seen on 04.03.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Ebuyer
  • SKU: 467607
Availability: In Stock
£29.50
computers DEFAULT
Description Reviews / Comments Add New

Product Description

Attractive edge moulds a full corner bead can be produced by making a second pass at 90. Used on all man-made boards such as medium density fibre board chipboard & also natural timbers & most plastics. T.C.T. Shank = 1/4 in. R = 4.8 mm. D = 26 mm. d = 22 mm. C = 16 mm. B = 15.9 mm. Craft Range
- They can be used on all man-made boards such as medium density fibre board chipboard & also natural timbers & most plastics. Bead, Reed Cutters Bead & Reed cutters are ideally suited to form straight or curved decorative edge mouldings on table tops chair legs & frames. They can also be used to produce complete round over profiles for window boards & stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications. Certain staff bead cutters are used to join boards & produce hinged joints for table tops.

Reviews/Comments

Add New

Intelligent Comparison

Archived Product
Trend 9/71 X 1/4 Tungsten Carbide Corner Bead Cutter
Trend 9/71 X 1/4 Tungsten Carbide Corner Bead Cutter Ebuyer
£37.00
Archived Product
Trend 9/73 X 1/4 Tungsten Carbide Corner Bead Cutter
Trend 9/73 X 1/4 Tungsten Carbide Corner Bead Cutter Ebuyer
£56.99
Archived Product
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 12/3 X 1/4 Tungsten Carbide Radius Cutter Ebuyer
£23.00
Archived Product
Trend 13/3 X 1/4 Tungsten Carbide Radius Cutter
Trend 13/3 X 1/4 Tungsten Carbide Radius Cutter Ebuyer
£38.50
Archived Product
Trend 18/80 X 1/2 Tungsten Carbide Panelling Bevel
Trend 18/80 X 1/2 Tungsten Carbide Panelling Bevel Ebuyer
£86.50
Archived Product
Trend 46/39 X 1/4 Tungsten Carbide Rebate Set
Trend 46/39 X 1/4 Tungsten Carbide Rebate Set Ebuyer
£44.99
Archived Product
Trend 10/11 X 1/2 Tungsten Carbide Chamfer V Groove
Trend 10/11 X 1/2 Tungsten Carbide Chamfer V Groove Ebuyer
£35.00
Archived Product
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm Ebuyer
£11.00

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.
edge - The point at which two surfaces meet
Natural - not manmade
Chipboard - A piece of wood like material that us used to pin paper and notes too.
Decorative - Making things look more appealing and attractive.
Individual - A single separate item or person.
Joints - The sections where one component is joined to another.

Supplier Information

Ebuyer
Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.
Page Updated: 2024-03-04 12:41:25

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu