The Cisco 1-port T1/E1 multiflex interface cards support generic single-port T1 or E1 trunk interfaces for voice, data, & integrated voice and/or data applications. These cards provide basic structured T1 service, as well as structured & unstructured E1 services. ...

Cisco N2XX-AQPCI05= Fibre Channel Host Bus Adapter with 8.5 Gbps data transfer has a 2 x LC fibre channel. This adapter is part of the QLE2500 HBA product family that offers next generation 8 Gb FC technology, meeting the business requirements of the enterprise data center. Interfaces/ports: 2 x LC fibre channel, PCI express 2.0 x 8 Dimensions: 2 1/2" (H) x 6.6" (W) Compatability: PC, unix Connectivity technology: Wired Maximum data transfer rate: 8.5 GB/s Topology: Point-to-point, switched fabric Temperature: 32
- 131 deg F (operating); Humidity: 10
- 90% (operating) Form factor: Low profile plug in card Industry standards: FCC Part 15, Subpart B, Class A, VCCI V-3/2004.4, MIC, BSMI (CNS 13438), UL, c UL, UL60950, CSA C22.2 No.60950, Class 1 Laser Product per DHHS 21CFR J, TUV: EN60950-1:2001, EN60825-1:1994+A1+A2, EN60825-2:1994+A1 Protocols: FC-AL-2, FC-AL, FC-Tape, FCP-3-SCSI, FC-SP, FCP-2, FCP-3 / Topology: Point to point, Switched fabric / Fibre class supported: Class 2, class 3 Fibre type: Multimode Certificates & standards: WEEE, Energy Star, Ro Hs-6

...

- Type: Network adapter
- Connector: SFP/SFP+
- Connector (Second End): QSFP ...

The Cisco Gigabit Ethernet High-Speed WAN Interface Card (HWIC) brings Gigabit Ethernet connectivity to Cisco Integrated Services Routers to accelerate applications such as Metro Ethernet access, inter-VLAN routing, & high-speed connectivity to LAN switches. The single-port Cisco Gigabit Ethernet HWIC provides Gigabit Ethernet optical & copper connectivity in a compact form factor for Cisco Integrated Service Routers (ISRs). The Gigabit Ethernet HWIC enables branch offices to cost-effectively use high-speed uplinks in numerous environments. The enhanced performance of Gigabit Ethernet in Cisco ISRs to enable new applications & services, as well as provide greater capacity for existing inter-VLAN routing & bridging capabilities. in addition, branch offices can now connect to metropolitan-area networks (MANs). Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Cisco AIR-AP-BRACKET-2=
- AP 1040/1140/1260/3500 Series Mounting Bracket, Universal Please note: networking components such as
...

The Cisco 4-Ports Layer 2 Gigabit Ether Switch network interface modules switch modules to which you can connect Cisco IP phones, Cisco wireless access point workstations, and other network devices such as video devices, routers, switches, and other network switch modules. ...

The NPE-G2 maintains & executes the system management functions for the Cisco 7200 VXR routers & Cisco u BR7200 series routers & also holds the system memory & environmental monitoring functions. The NPE-G2 consists of one board with multiple interfaces. ...

Plug-in module Performance: Band
Width:160 Gbps Designed For: Catalyst 9200, 9200L ...

The Cisco Nexus 3048 Switch is a line-rate Gigabit Ethernet top-of-rack (To R) switch & is part of the Cisco Nexus 3000 Series Switches portfolio. The Cisco Nexus 3048, with its compact one-rack-unit (1RU) form factor & integrated Layer 2 & 3 switching, complements the existing Cisco Nexus family of switches. This switch runs the industry-leading Cisco NX-OS Software operating system, providing customers with robust features & functions that are deployed in thousands of data centers worldwide. The Cisco Nexus 3048 is ideal for Big-Data customers that require a Gigabit Ethernet To R switch with local switching that connects transparently to upstream Cisco Nexus switches, providing an end-to-end Cisco Nexus fabric in their data centers. ...

Get high performance, advanced programmability, & wire-rate Layer 2 & 3 switching based on the Cisco NX-OS operating system. The 31108TC-V is a 48-port, 1/10-Gbps switch with 40/100-Gbps uplinks. Ideal for building cost-effective, power-efficient data centers, this compact switch supports Dev Ops toolsets. It offers flexibility, mobility, & scale for cloud & service providers. Features & Capabilities High Performance & Flexibility
- All ports support 1, 10, 40, 100 Gbps for maximum flexibility
- Up to 2.5 Tbps & up to 1.4 billion packets per second (Bpps)
- The design is optimized for ultra-low, nominal latency (approximately 650 nanoseconds)
- Border Gateway Protocol Ethernet VPN (BGP EVPN) control plane offers scalable multitenancy & host mobility Feature-Rich
- Native line-rate virtual extensible LAN (VXLAN) routing supports mobility & tenant isolation
- Integrates with Cisco Cloud Network Manager & XML management tools
-

Includes:: scalable & cost-effective network traffic monitoring with Cisco Nexus Data Broker Simple Operations
- Touchless boot-up with Power-On Auto-Provisioning (POAP)
- Configuration management Dev Ops tools support Puppet, Chef, & Ansible
- Advanced programmability functions include Cisco NX-API comm&-line interface (CLI), NX-API representational state transfer (REST), Cisco Embedded Event Manager, & Python scripting











...