The AIR-ANTM2050D-R antenna operates in the 2.4- & 5-GHz bands, & is designed for use with spatial-diversity access point (AP) systems. The AIR-ANTM2050D-R antenna is compatible with Cisco 802.11a/b/g radio products using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Second-generation 1- & 2-port G.703 Multiflex Trunk voice/WAN Interface Cards support not only unstructured E1 but also all the features of the other Cisco MFT VWIC2 cards, including drop & insert. Additional flexibility is provided on the 2 port G.703 Multiflex Trunk voice/WAN Interface Cards with the capability to configure one port for unstructured E1 while configuring the other for standard framed E1. ...

This flexible, multiservice solution supports multiple data, voice, & integrated data & voice applications, facilitating the migration from data only or channelized data & voice to packet voice solutions & simplifying deployment, management, & sparing. ...

The Cisco 1-port T1/E1 multiflex interface cards support generic single-port T1 or E1 trunk interfaces for voice, data, & integrated voice and/or data applications. These cards provide basic structured T1 service, as well as structured & unstructured E1 services. ...

Cisco N2XX-AQPCI05= Fibre Channel Host Bus Adapter with 8.5 Gbps data transfer has a 2 x LC fibre channel. This adapter is part of the QLE2500 HBA product family that offers next generation 8 Gb FC technology, meeting the business requirements of the enterprise data center. Interfaces/ports: 2 x LC fibre channel, PCI express 2.0 x 8 Dimensions: 2 1/2" (H) x 6.6" (W) Compatability: PC, unix Connectivity technology: Wired Maximum data transfer rate: 8.5 GB/s Topology: Point-to-point, switched fabric Temperature: 32
- 131 deg F (operating); Humidity: 10
- 90% (operating) Form factor: Low profile plug in card Industry standards: FCC Part 15, Subpart B, Class A, VCCI V-3/2004.4, MIC, BSMI (CNS 13438), UL, c UL, UL60950, CSA C22.2 No.60950, Class 1 Laser Product per DHHS 21CFR J, TUV: EN60950-1:2001, EN60825-1:1994+A1+A2, EN60825-2:1994+A1 Protocols: FC-AL-2, FC-AL, FC-Tape, FCP-3-SCSI, FC-SP, FCP-2, FCP-3 / Topology: Point to point, Switched fabric / Fibre class supported: Class 2, class 3 Fibre type: Multimode Certificates & standards: WEEE, Energy Star, Ro Hs-6

...

The Cisco Gigabit Ethernet High-Speed WAN Interface Card (HWIC) brings Gigabit Ethernet connectivity to Cisco Integrated Services Routers to accelerate applications such as Metro Ethernet access, inter-VLAN routing, & high-speed connectivity to LAN switches. The single-port Cisco Gigabit Ethernet HWIC provides Gigabit Ethernet optical & copper connectivity in a compact form factor for Cisco Integrated Service Routers (ISRs). The Gigabit Ethernet HWIC enables branch offices to cost-effectively use high-speed uplinks in numerous environments. The enhanced performance of Gigabit Ethernet in Cisco ISRs to enable new applications & services, as well as provide greater capacity for existing inter-VLAN routing & bridging capabilities. in addition, branch offices can now connect to metropolitan-area networks (MANs). Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Cisco AIR-AP-BRACKET-2=
- AP 1040/1140/1260/3500 Series Mounting Bracket, Universal Please note: networking components such as
...

- Product Description: Cisco network device wall / pole mounting kit
- Product Type: Network device wall / pole mounting kit
-

...

The Cisco 4-Ports Layer 2 Gigabit Ether Switch network interface modules switch modules to which you can connect Cisco IP phones, Cisco wireless access point workstations, and other network devices such as video devices, routers, switches, and other network switch modules. ...

The NPE-G2 maintains & executes the system management functions for the Cisco 7200 VXR routers & Cisco u BR7200 series routers & also holds the system memory & environmental monitoring functions. The NPE-G2 consists of one board with multiple interfaces. ...