Cisco AIR-AP-BRACKET-2=
- AP 1040/1140/1260/3500 Series Mounting Bracket, Universal Please note: networking components such as
...

- Product Description: Cisco network device wall / pole mounting kit
- Product Type: Network device wall / pole mounting kit
-

...

The Cisco 4-Ports Layer 2 Gigabit Ether Switch network interface modules switch modules to which you can connect Cisco IP phones, Cisco wireless access point workstations, and other network devices such as video devices, routers, switches, and other network switch modules. ...

The NPE-G2 maintains & executes the system management functions for the Cisco 7200 VXR routers & Cisco u BR7200 series routers & also holds the system memory & environmental monitoring functions. The NPE-G2 consists of one board with multiple interfaces. ...

Plug-in module Performance: Band
Width:160 Gbps Designed For: Catalyst 9200, 9200L ...

Get high performance, advanced programmability, & wire-rate Layer 2 & 3 switching based on the Cisco NX-OS operating system. The 31108TC-V is a 48-port, 1/10-Gbps switch with 40/100-Gbps uplinks. Ideal for building cost-effective, power-efficient data centers, this compact switch supports Dev Ops toolsets. It offers flexibility, mobility, & scale for cloud & service providers. Features & Capabilities High Performance & Flexibility
- All ports support 1, 10, 40, 100 Gbps for maximum flexibility
- Up to 2.5 Tbps & up to 1.4 billion packets per second (Bpps)
- The design is optimized for ultra-low, nominal latency (approximately 650 nanoseconds)
- Border Gateway Protocol Ethernet VPN (BGP EVPN) control plane offers scalable multitenancy & host mobility Feature-Rich
- Native line-rate virtual extensible LAN (VXLAN) routing supports mobility & tenant isolation
- Integrates with Cisco Cloud Network Manager & XML management tools
-

Includes:: scalable & cost-effective network traffic monitoring with Cisco Nexus Data Broker Simple Operations
- Touchless boot-up with Power-On Auto-Provisioning (POAP)
- Configuration management Dev Ops tools support Puppet, Chef, & Ansible
- Advanced programmability functions include Cisco NX-API comm&-line interface (CLI), NX-API representational state transfer (REST), Cisco Embedded Event Manager, & Python scripting











...

The Cisco Nexus 3524 switches are compact one-rack-unit (1RU) form-factor 10 Gigabit Ethernet switches that provide line-rate Layer 2 & 3 switching with ultra-low latency. The Cisco Nexus 3524 switches contain no physical layer (PHY) chips, allowing low latency & low power consumption. These switches support both forward & reversed airflow schemes & both AC & DC power inputs. ...

Todays data centers are increasingly filled with dense rack-mount & blade servers that host powerful multicore processors. The rapid increase in in-rack computing density & the increasing use of virtualization software combine to accelerate the demand for 10 Gigabit Ethernet & consolidated I/O: applications for which the Cisco Nexus 5000 series switches are an excellent match. With low latency, front-to-back cooling, & rear-facing data ports, the Cisco Nexus 5000 series is designed for a broad range of physical, virtual, storage access, & high-performance computing environments, thus giving customers the flexibility to meet & scale their data center requirements in a gradual manner & at a pace that aligns with their business objectives. The switch series, using cut-through architecture, supports line-rate 10 Gigabit Ethernet on all ports while maintaining consistently low latency independent of packet size & services enabled. It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, & scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, & cluster environments. Its ability to connect Fiber Channel over Ethernet (FCo E) to native Fiber Channel protects existing storage system investments while dramatically simplifying in-rack cabling. In addition to supporting standard 10 Gigabit Ethernet network interface cards (NICs) on servers, the Cisco Nexus 5000 series integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs & Fiber Channel host bus adapters (HBAs), making the transition to a single, unified network fabric transparent & consistent with existing practices, management software, & OS drivers. The Cisco Nexus 5000 series is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back cooling, & with data ports in the rear, bringing switching into close proximity with servers & making cable runs short & simple. The switch series is highly serviceable, with redundant, hot-pluggable power supply & fan module. The Cisco Nexus 5548UP switch is an Ethernet, Fiber Channel, & FCo E unified fabric switch. ...

Todays data centers are increasingly filled with dense rack-mount & blade servers that host powerful multicore processors. The rapid increase in in-rack computing density & the increasing use of virtualization software combine to accelerate the demand for 10 Gigabit Ethernet & consolidated I/O: applications for which the Cisco Nexus 5000 series switches are an excellent match. With low latency, front-to-back cooling, & rear-facing data ports, the Cisco Nexus 5000 series is designed for a broad range of physical, virtual, storage access, & high-performance computing environments, thus giving customers the flexibility to meet & scale their data center requirements in a gradual manner & at a pace that aligns with their business objectives. The switch series, using cut-through architecture, supports line-rate 10 Gigabit Ethernet on all ports while maintaining consistently low latency independent of packet size & services enabled. It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, & scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, & cluster environments. Its ability to connect Fiber Channel over Ethernet (FCo E) to native Fiber Channel protects existing storage system investments while dramatically simplifying in-rack cabling. In addition to supporting standard 10 Gigabit Ethernet network interface cards (NICs) on servers, the Cisco Nexus 5000 series integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs & Fiber Channel host bus adapters (HBAs), making the transition to a single, unified network fabric transparent & consistent with existing practices, management software, & OS drivers. The Cisco Nexus 5000 series is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back cooling, & with data ports in the rear, bringing switching into close proximity with servers & making cable runs short & simple. The switch series is highly serviceable, with redundant, hot-pluggable power supply & fan module. The Cisco Nexus 5596UP is a two rack-unit chassis that provides 48 fixed "unified ports" on the base chassis along with 3 expansion slots, scaling up to a total of 96 ports. The switch delivers architectural flexibility, infrastructure simplicity, & business agility. For traditional, virtualized, unified, & high-performance computing (HPC) environments, this switch offers the IT & business advantages. ...

The Cisco Nexus 7000 Series 48-Port Gigabit Ethernet Modules are highly scalable modules designed for performance driven mission-critical Ethernet networks. Cisco Nexus 7000 Series has fiber options for Gigabit Ethernet modules. The fiber module is a 48-port Gigabit Ethernet module with SFP optics. The Cisco Nexus 7000 Series Switches comprise a modular data center-class product line designed for highly scalable 10 Gigabit Ethernet networks with a fabric architecture that scales beyond 15 terabits per second (Tbps). Designed to meet the requirements of the most mission-critical data centers, it delivers continuous system operation & virtualized pervasive services. The Cisco Nexus 7000 Series is based on a proven operating system, with enhanced features to deliver real-time system upgrades with exceptional manageability & serviceability. Its innovative design is purpose built to support end-to-end data center connectivity, consolidating IP, storage, & interprocess communication (IPC) networks onto a single Ethernet fabric. The Cisco Nexus 7000 48-Port Gigabit Ethernet Modules with 40 Gbps of bandwidth to the fabric are high-performance, highly scalable modules designed for mission-critical Ethernet networks. Populating the 18-slot chassis with these modules delivers up to 768 ports of Gigabit Ethernet in a single chassis. Populating the 10-slot chassis with these modules delivers up to 384 ports of Gigabit Ethernet in a single chassis. The Cisco Nexus 7000 48-Port Gigabit Ethernet Modules are ideal for the access layer of a data center network, where high density, high performance, & continuous system operation are crucial. All Cisco Nexus 7000 Series I/O modules contain an integrated forwarding engine. This architecture scales the forwarding performance of the chassis linearly by the number of I/O modules employed. The forwarding engine on the Cisco Nexus 7000 48-Port Gigabit Ethernet Modules are part of the Cisco Nexus 7000 M Series of forwarding engines. The Cisco Nexus 7000 48-Port gigabit Ethernet Module offers exceptional security with integrated hardware support for Cisco Trust Sec. This

Includes:: line rate data confidentiality, data integrity & ACL processing for Security Group Tags. Data confidentiality & integrity conform to the IEEE MAC security standard. All 48 ports on the module support the Advanced Encryption Standard (AES) cipher using a 128-bit key. The security ACLs are enhanced through hardware support for Cisco metadata headers capable of carrying SGTs. Security group ACLs (SGACLs) use SGT information to provide hardware-based enforcement of security policies. This removes dependencies on IP addresses thus improving scalability & simplifying manageability. The fabric interface on the Cisco Nexus 7000 48-Port Gigabit Ethernet Module delivers 40 Gbps of bandwidth in each direction. Traffic destined for a different module is distributed across up to five fabric modules. At least one fabric module is required in the chassis. Two fabric modules installed in the chassis delivers fabric fault tolerance with no loss of bandwidth. The Cisco Nexus 7000 48-Port gigabit Ethernet Module buffers data in virtual output queues before the data flows to the fabric. The data flow is controlled by a central arbiter on the supervisor module using a credit-based buffer design. This architecture offers a lossless fabric that delivers quality of service (Qo S) & fairness across all ports, even during congestion.

...