More From Contributor

Simple yet stylish, feature-rich yet affordable, Neos is the ideal PC chassis for value seekers & first-time builders. The ...

Available

This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass & an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. In spite of the fine mesh, the brightly illuminated fans installed behind it remain visible from the outside. The front panel

Includes:: the typical Bit Fenix logo on the front & features three pre-installed 120 mm fans, while the fourth is placed at the back. All four fans have digitally addressable RGB-LEDs. Furthermore, users will appreciate the presence of two 3, 5" slots, two 2, 5" slots as well as the possibility of installing additional fans if needed. The Bitfenix Nova Mesh offers plenty of space for the majority of common configurations. The Highlights of the Bit Fenix Nova Mesh A-RGB TG Midi-Tower: New version of the popular Nova TG Midi-Tower with fine mesh front panel Tinted, tempered glass side, motherboards up to a E-ATX formfactor Supports gaming GPUs up to 36 cm in length Slots for 3x 120 mm- or 2x 140 mm fans in the front & 2x 120 in the roof Four pre-installed fans with digitally addressable RGB LEDs Space for 240 mm radiator in roof & up to 280/360 radiator in front Space for 2x 3, 5/2, 5- & 3x 2, 5" drives Bit Fenix Nova Mesh A-RGB TG: Sleek Midi-Tower in Black The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without compromising on aesthetics. Quite to the contrary, the case cuts an elegant & timeless figure & stands out from the competition. The clean lines & sleek design not only look good, they fulfil a purpose: The Bit Fenix Nova Mesh A-RGB TG keeps out unwanted dust while also minimising noise. Bit Fenixs modern approach to design also means that the motherboard is located towards the top of the case & the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust & dirt, also helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass. Plenty of Space for Well-Cooled Hardware A large cut-out in the motherboard tray enables users to benefit from convenient & easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2, 5/3, 5" slots are available in the HDD cage beneath the PSU shroud. Two 2, 5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components. The cases cooling is catered for by up to three 120- or two 140 mm fans in the front. in addition, the roof offers space for two additional 120 mm fans. There are four pre-installed 120 mm fans with digitally addressable RGB-LED lighting from Bit Fenix Spectre Series, one in the rear & three in the front that ensure heat is exhausted & dissipated efficiently. Thanks to the fine mesh front & dust filter in the roof, the interior is sure to remain clean & dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans
- with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforeh&. The I/O panel located on top of the case towards the front

Includes:: two USB (Universal Serial Bus) 3.0- & two audio ports. This is complemented by the inclusion of a power- & reset switch. Technical

Details: Dimensions: 201 x 437 x 465 mm (W x H x D)

Material: Steel, ABS plastic, tempered glass

Colour: Black Weight: 5.3kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (Front) 2x 120 mm (Roof) 1x 120 mm (Rear) Pre-installed: 3x 120 mm (Front, digitally addressable RGB-LEDs) 1x 120 mm (Rear, digitally addressable RGB-LEDs) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (roof) 1x max. 120 mm (rear) Drives: 2x 2, 5/3, 5" (internal) 3x 2, 5" (internal) Extension slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x HD-Audio In/ Out 1x Power Button 1x Reset Button Power supply: Standard PS2 ATX format (optional) Maximum graphics card length: 360mm Maximum CPU cooler

Height: 160mm Maximum power supply length: 220mm

...

Available

This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass & an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. In spite of the fine mesh, the brightly illuminated fans installed behind it remain visible from the outside. The front panel

Includes:: the typical Bit Fenix logo on the front & features three pre-installed 120 mm fans, while the fourth is placed at the back. All four fans have digitally addressable RGB-LEDs. Furthermore, users will appreciate the presence of two 3, 5" slots, two 2, 5" slots as well as the possibility of installing additional fans if needed. The Bitfenix Nova Mesh offers plenty of space for the majority of common configurations. The Highlights of the Bit Fenix Nova Mesh A-RGB TG Midi-Tower: New version of the popular Nova TG Midi-Tower with fine mesh front panel Tinted, tempered glass side, motherboards up to a E-ATX formfactor Supports gaming GPUs up to 36 cm in length Slots for 3x 120 mm- or 2x 140 mm fans in the front & 2x 120 in the roof Four pre-installed fans with digitally addressable RGB LEDs Space for 240 mm radiator in roof & up to 280/360 radiator in front Space for 2x 3, 5/2, 5- & 3x 2, 5" drives Bit Fenix Nova Mesh A-RGB TG: Sleek Midi-Tower in White The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without compromising on aesthetics. Quite to the contrary, the case cuts an elegant & timeless figure & stands out from the competition. The clean lines & sleek design not only look good, they fulfil a purpose: The Bit Fenix Nova Mesh A-RGB TG keeps out unwanted dust while also minimising noise. Bit Fenixs modern approach to design also means that the motherboard is located towards the top of the case & the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust & dirt, also helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass. Plenty of Space for Well-Cooled Hardware A large cut-out in the motherboard tray enables users to benefit from convenient & easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2, 5/3, 5" slots are available in the HDD cage beneath the PSU shroud. Two 2, 5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components. The cases cooling is catered for by up to three 120- or two 140 mm fans in the front. in addition, the roof offers space for two additional 120 mm fans. There are four pre-installed 120 mm fans with digitally addressable RGB-LED lighting from Bit Fenix Spectre Series, one in the rear & three in the front that ensure heat is exhausted & dissipated efficiently. Thanks to the fine mesh front & dust filter in the roof, the interior is sure to remain clean & dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans
- with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforeh&. The I/O panel located on top of the case towards the front

Includes:: two USB (Universal Serial Bus) 3.0- & two audio ports. This is complemented by the inclusion of a power- & reset switch. Technical

Details: Dimensions: 201 x 437 x 465 mm (W x H x D)

Material: Steel, ABS plastic, tempered glass

Colour: White Weight: 5.3kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (Front) 2x 120 mm (Roof) 1x 120 mm (Rear) Pre-installed: 3x 120 mm (Front, digitally addressable RGB-LEDs) 1x 120 mm (Rear, digitally addressable RGB-LEDs) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (roof) 1x max. 120 mm (rear) Drives: 2x 2, 5/3, 5" (internal) 3x 2, 5" (internal) Extension slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x HD-Audio In/ Out 1x Power Button 1x Reset Button Power supply: Standard PS2 ATX format (optional) Maximum graphics card length: 360mm Maximum CPU cooler

Height: 160mm Maximum power supply length: 220mm

...

Available

This case is the mesh version of the simple, but attractive Nova Midi-Tower & puts the focus on air cooling. In this variant, the entire front is made from a close-meshed metal mesh grid to maximize airflow. Behind it is a layer of fine nylon fabric that serves as a dust filter. In spite of the fine mesh, illuminated fans placed behind it are clearly visible from the outside. The front panel also features the typical Bit Fenix logo on the front & a 120mm fan built into the rear. Users can also expect two 3.5-inch slots, two 2.5-inch slots & the option of installing additional fans. The Bit Fenix Nova Mesh thus offers plenty of space for the most common configurations. The Features of the Bit Fenix Nova at a Glance: Black midi-tower from Bit Fenix with fine mesh front Compatible with ATX-, Micro-ATX- & Mini-ITX motherboards

Includes:: 120 mm fan on the rear Slots for 3x 120mm or 2x 140mm fans on the front & 2x 120mm fans on the top Room for 240mm radiator on top & up to 280/360mm on front Place for 2x 3.5/2.5- & 3x 2.5-inch drives 2x USB (Universal Serial Bus) 3.0, 2x 3.5mm jack (1x each AD Audio In / Out) Bit Fenix Nova Mesh: Plain Midi Tower in Black The front panel with the fine mesh perfectly combines the need for attractive aesthetics with airflow. The case makes no compromises in terms of its appearance. On the contrary: the design is timelessly elegant & looks as if it were made from a single moulded piece. The seamless design not only looks great, it also serves a purpose, because the Bit Fenix Nova Mesh is designed to fight against dust & annoying hardware noises. The two basic versions of the Nova Mesh case (with & without tempered glass side panel) differ on the left side panel. Thanks to its modern design, the motherboard is installed at the top & the power supply at the bottom. This offers the advantage of a separate fresh air inlet for the power supply unit through the floor, thus reducing overall heat build-up. A dust filter protects the power supply from the ingress of dirt & the prevents overheating. A power supply cover hides any unsightly cable clutter. Space for Well-Cooled Hardware A large cut-out in the motherboard tray allows for the easy & straightforward installation of compatible CPU coolers. Expansion cards can be mounted by easily removable screws. Two internal 2.5/3.5-inch slots are available in the HDD cage under the power supply cover. Two 2.5-inch drives are located on the back of the motherboard tray, & another one can be screwed onto the power supply cover. All in all, theres plenty of room for full-size hardware. When it comes to cooling, up to three 120 or two 140 fans can be installed on the front. In addition, two 120 mm fans can be mounted on top. Together with the pre-installed 120 mm fan on the rear, this makes for an impressive maximum of six 120 mm fans, ensuring your hard-earned hardware receives the best possible cooling. Thanks to the fine mesh front & the dust filter on the lid, the interior will remain clean & low-maintenance for years to come. Of course, you can install compatible radiators instead of the fans if you prefer, for example a 360 or a 280 at the front. On the top there is a somewhat narrow space for a 240 mm radiator. The I/O panel in the upper offers two USB (Universal Serial Bus) 3.0 & two HD audio connections. The connectors are complemented by the addition of a power switch & a reset switch. Technical

Details: Dimensions: 210 x 437 x 460 mm (W x H x D)

Material: Steel, plastic

Colour: Black Weight: 4.8kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (front) 2x 120 mm (cover) 1x 120 mm (rear) Pre-installed: 1x 120 mm (rear) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (cover) 1x max. 120 mm (rear) Drives: 2x 2.5/3.5 inch (internal) 3x 2.5 inch (internal) Expansion slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x each HD Audio In/ Out 1x Power button 1x Reset button PSU: Standard PS2 ATX-Format (optional) Max GPU length: 360mm Max CPU cooler

Height: 160mm Max PSU length: 220mm

...

Available

This case is the mesh version of the simple, but attractive Nova Midi-Tower & puts the focus on air cooling. In this variant, the entire front is made from a close-meshed metal mesh grid to maximize airflow. Behind it is a layer of fine nylon fabric that serves as a dust filter. In spite of the fine mesh, illuminated fans placed behind it are clearly visible from the outside. The front panel also features the typical Bit Fenix logo on the front & a 120mm fan built into the rear. Users can also expect two 3.5-inch slots, two 2.5-inch slots & the option of installing additional fans. The Bit Fenix Nova Mesh thus offers plenty of space for the most common configurations. The Features of the Bit Fenix Nova at a Glance: White midi-tower from Bit Fenix with fine mesh front Compatible with ATX-, Micro-ATX- & Mini-ITX motherboards

Includes:: 120 mm fan on the rear Slots for 3x 120mm or 2x 140mm fans on the front & 2x 120mm fans on the top Room for 240mm radiator on top & up to 280/360mm on front Place for 2x 3.5/2.5- & 3x 2.5-inch drives 2x USB (Universal Serial Bus) 3.0, 2x 3.5mm jack (1x each AD Audio In / Out) Bit Fenix Nova Mesh: Plain Midi Tower in White The front panel with the fine mesh perfectly combines the need for attractive aesthetics with airflow. The case makes no compromises in terms of its appearance. On the contrary: the design is timelessly elegant & looks as if it were made from a single moulded piece. The seamless design not only looks great, it also serves a purpose, because the Bit Fenix Nova Mesh is designed to fight against dust & annoying hardware noises. The two basic versions of the Nova Mesh case (with & without tempered glass side panel) differ on the left side panel. Thanks to its modern design, the motherboard is installed at the top & the power supply at the bottom. This offers the advantage of a separate fresh air inlet for the power supply unit through the floor, thus reducing overall heat build-up. A dust filter protects the power supply from the ingress of dirt & the prevents overheating. A power supply cover hides any unsightly cable clutter. Space for Well-Cooled Hardware A large cut-out in the motherboard tray allows for the easy & straightforward installation of compatible CPU coolers. Expansion cards can be mounted by easily removable screws. Two internal 2.5/3.5-inch slots are available in the HDD cage under the power supply cover. Two 2.5-inch drives are located on the back of the motherboard tray, & another one can be screwed onto the power supply cover. All in all, theres plenty of room for full-size hardware. When it comes to cooling, up to three 120 or two 140 fans can be installed on the front. In addition, two 120 mm fans can be mounted on top. Together with the pre-installed 120 mm fan on the rear, this makes for an impressive maximum of six 120 mm fans, ensuring your hard-earned hardware receives the best possible cooling. Thanks to the fine mesh front & the dust filter on the lid, the interior will remain clean & low-maintenance for years to come. Of course, you can install compatible radiators instead of the fans if you prefer, for example a 360 or a 280 at the front. On the top there is a somewhat narrow space for a 240 mm radiator. The I/O panel in the upper offers two USB (Universal Serial Bus) 3.0 & two HD audio connections. The connectors are complemented by the addition of a power switch & a reset switch. Technical

Details: Dimensions: 210 x 437 x 460 mm (W x H x D)

Material: Steel, plastic

Colour: White Weight: 4.8kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (front) 2x 120 mm (cover) 1x 120 mm (rear) Pre-installed: 1x 120 mm (rear) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (cover) 1x max. 120 mm (rear) Drives: 2x 2.5/3.5 inch (internal) 3x 2.5 inch (internal) Extension slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x each HD Audio In/ Out 1x Power button 1x Reset button Power supply: Standard PS2 ATX format (optional) Maximum graphics card length: 360mm Maximum CPU cooler

Height: 160mm Maximum power supply length: 220mm

...

Available

This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass & an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. Behind this lies a fine layer of Nylon, which functions as a dust filter. In spite of the fine mesh, the brightly illuminated fans installed behind it remain visible from the outside. The front panel

Includes:: the typical Bit Fenix logo on the front & features two pre-installed 120 mm fans, one of which is located in the back &

Includes:: RGB-LED. Furthermore, users will appreciate the presence of two 3, 5" slots, two 2, 5" slots as well as the possibility of installing additional fans if needed. The Bitfenix Nova Mesh offers plenty of space for the majority of common configurations. The Highlights of the Bit Fenix Nova Mesh TG Midi-Tower: New version of the popular Nova TG Midi-Tower with fine mesh front panel Tinted, tempered glass side Supports gaming GPUs up to 36 cm in length Slots for 3x 120 mm- or 2x 140 mm fans in the front & 2x 120 in the roof Two pre-installed fans for great airflow, perfect for air-cooled setups Space for 240 mm radiator in roof & up to 280/360 radiator in front Space for 2x 3, 5/2, 5- & 3x 2, 5" drives Bit Fenix Nova Mesh TG: Sleek Midi-Tower in White The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without compromising on aesthetics. Quite to the contrary, the case cuts an elegant & timeless figure & stands out from the competition. The clean lines & sleek design not only look good, they fulfil a purpose: The Bit Fenix Nova Mesh TG keeps out unwanted dust while also minimising noise. Both basic versions of the Nova Mesh TG can be differentiated by their left side panels (with or without tempered glass). Bit Fenixs modern approach to design also means that the motherboard is located towards the top of the case & the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust & dirt, also helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass. Plenty of Space for Well-Cooled Hardware A large cut-out in the motherboard tray enables users to benefit from convenient & easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2, 5/3, 5" slots are available in the HDD cage beneath the PSU shroud. Two 2, 5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components. The cases cooling is catered for by up to three 120- or two 140 mm fans in the front, a 120 mm fan comes pre-installed. in addition, the roof offers space for two additional 120 mm fans. The pre-installed 120 mm RGB-LED fan in the rear ensures heat is exhausted & dissipated efficiently. Thanks to the fine mesh front & dust filter in the roof, the interior is sure to remain clean & dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans
- with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforeh&. The I/O panel located on top of the case towards the front

Includes:: two USB (Universal Serial Bus) 3.0- & two audio ports. This is complemented by the inclusion of a power- & reset switch. Technical

Details: Dimensions: 201 x 437 x 465 mm (W x H x D)

Material: Steel, ABS plastic, tempered glass

Colour: White, black (gromits, cables & fans) Weight: 5.3kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (Front) 2x 120 mm (Roof) 1x 120 mm (Rear) Pre-installed: 1x 120 mm (Front) 1x 120 mm (Rear, RGB-LEDs) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (roof) 1x max. 120 mm (rear) Drives: 2x 2, 5/3, 5" (internal) 3x 2, 5" (internal) Expansion slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x HD-Audio In/ Out 1x Power Button 1x Reset Button PSU: Standard PS2 ATX-Format (optional) Max GPU length: 360mm Max CPU cooler

Height: 160mm Max PSU length: 220mm

...

Available

Bitfenix Nova delivers style, performance & silence at an incredibly competitive price. Whether you plan to build a basic office, home or gaming system, Novas simplistic design, aluminum badge, color options & optional window side panel mean it will blend in perfectly. Long air vents running along the sides of its front, hidden behind sleek mesh strips, provide plenty of airflow to cool the system. & as a result allowed us to keep Novas top & front panel completely closed to block fan-noise from escaping the enclosure, & dust from building up inside. To seal fan noise inside the chassis, we developed a closed front panel for NOVA. Concealed behind a our signature mesh strips running along the sides of the front panel, lie a series of 134 air vents, that let fresh air stream into the case effortlessly. Thanks to this noise-shield design of a raised, closed front panel with side vents, NOVA is capable of keeping even powerful components supplied with the airflow required to keep them cooled adequately, all the while confining the fan-noise to the interior of the chassis. NOVA offers a dual 120mm fan intake in the front, & a single 120mm exhaust in the rear, which when fully equipped results in excellent cooling performance, & a net positive air pressure inside the chassis, greatly reducing the buildup of dust. The frontal fan vents are positioned to channel fresh air directly over the storage drives, & onto the GPU & CPU, while the rear fan vent is positioned right above the CPU & supports even high-performance closed water-cooling systems. NOVA is available in pitch black & pure white to match your environment & perfectly blend in
- whether you plan a stealthy, dark, classy build or a modern, clean, pure looking white system. NOVA supports up to four full size 3.5" hard drives, two 2.5" compact hard drives or SSDs & features a full size 5.25" optical disc drive slot. More than enough for a brand new build, & plenty of space to migrate over older drives from an existing system. The angled front panel Interface of NOVA makes it easy to reach & use whether its on the floor, raised, or even standing on your desk. The large round power button is easy to find without even looking, while the reset button is purposely kept small & at the side of the panel. Two High Definition audio ports let you quickly connect a headset for a Skype call or to listen to your favorite music. To prevent dust from building up inside your power supply, causing its fan to spin at unnecessarily high speeds or even overheat & shut down, NOVA comes bundled with a dust filter you can quickly rinse & slide back. This not only reduces noise, but increases the lifetime of your power supply & keeps your system running reliably for years on-end. All the mainboard st&-offs come pre-installed, cutting down the time & effort of installing a system inside NOVA significantly. NOVA supports High Performance 120mm closed loop water coolers & CPU Heatsinks with a height of up to 160mm. & thanks to a large cut-out on the mainboard tray, installing optional metal brackets to support the additional weight of performance coolers is as easy as sliding off the rear side-panel to access the mainboards backside. With 7 expansion slots & a supported graphics card height of over 140mm, NOVA is ready for modern GPUs with a raised PCBs & larger, quieter heatsinks that extend beyond the traditional 110mm expansion card height.

Specification

Colour: Black Motherboard: ATX, Micro ATX, Mini-ITX (7 expansion slots) CPU Cooler: up to 160mm tall VGA: up to 320mm long & up to 140mm tall Power Supply: up to 220mm long 5.25” ODD Slots: 1 3.5” HDD Slots: 4 2.5” SSD Slots: 2 Dust Filter Bottom: Slide-out PSU Dust Filter Cooling Front: 120mm x 2 Cooling Rear: 120mm x 1 (included) Radiator Rear: 120mm I/O: USB (Universal Serial Bus) 3.0 x 1, USB (Universal Serial Bus) 2.0 x 1, HD Audio MIC & Headphone, Power LED (white), HDD LED (red)

Dimensions (Wx Hx D): 183 x 437 x 465 mm
- 7.20 x 17.20 x 18.30 inch

Materials: Steel, Plastic Weight: 4.8 Kg
- 10.6lbs Special

Features: Closed Front panel to block noise, Front panel side vents for good airflow, pre-installed mainboard st&-offs, rubberized anti-slip casefeet, PSU dust filter

...

Available

Bitfenix Nova delivers style, performance & silence at an incredibly competitive price. Whether you plan to build a basic office, home or gaming system, Novas simplistic design, aluminum badge, color options & optional window side panel mean it will blend in perfectly. Long air vents running along the sides of its front, hidden behind sleek mesh strips, provide plenty of airflow to cool the system. & as a result allowed us to keep Novas top & front panel completely closed to block fan-noise from escaping the enclosure, & dust from building up inside. To seal fan noise inside the chassis, we developed a closed front panel for NOVA. Concealed behind a our signature mesh strips running along the sides of the front panel, lie a series of 134 air vents, that let fresh air stream into the case effortlessly. Thanks to this noise-shield design of a raised, closed front panel with side vents, NOVA is capable of keeping even powerful components supplied with the airflow required to keep them cooled adequately, all the while confining the fan-noise to the interior of the chassis. NOVA offers a dual 120mm fan intake in the front, & a single 120mm exhaust in the rear, which when fully equipped results in excellent cooling performance, & a net positive air pressure inside the chassis, greatly reducing the buildup of dust. The frontal fan vents are positioned to channel fresh air directly over the storage drives, & onto the GPU & CPU, while the rear fan vent is positioned right above the CPU & supports even high-performance closed water-cooling systems. NOVA is available in pitch black & pure white to match your environment & perfectly blend in
- whether you plan a stealthy, dark, classy build or a modern, clean, pure looking white system. While purists probably opt for the solid steel side panel version of NOVA to create a completely closed, monolithic build, we created an optional window side panel to let you & others have a look at all the nice parts, while conveniently hiding the less interesting & appeasing looking ones. Combined with color matched components & LED fans & light strips NOVAs large window means that you can create a truly unique & impressive looking system. NOVA supports up to four full size 3.5" hard drives, two 2.5" compact hard drives or SSDs & features a full size 5.25" optical disc drive slot. More than enough for a brand new build, & plenty of space to migrate over older drives from an existing system. The angled front panel Interface of NOVA makes it easy to reach & use whether its on the floor, raised, or even standing on your desk. The large round power button is easy to find without even looking, while the reset button is purposely kept small & at the side of the panel. Two High Definition audio ports let you quickly connect a headset for a Skype call or to listen to your favorite music. To prevent dust from building up inside your power supply, causing its fan to spin at unnecessarily high speeds or even overheat & shut down, NOVA comes bundled with a dust filter you can quickly rinse & slide back. This not only reduces noise, but increases the lifetime of your power supply & keeps your system running reliably for years on-end. All the mainboard st&-offs come pre-installed, cutting down the time & effort of installing a system inside NOVA significantly. NOVA supports High Performance 120mm closed loop water coolers & CPU Heatsinks with a height of up to 160mm. & thanks to a large cut-out on the mainboard tray, installing optional metal brackets to support the additional weight of performance coolers is as easy as sliding off the rear side-panel to access the mainboards backside. With 7 expansion slots & a supported graphics card height of over 140mm, NOVA is ready for modern GPUs with a raised PCBs & larger, quieter heatsinks that extend beyond the traditional 110mm expansion card height.

Specification

Colour: Black Motherboard: ATX, Micro ATX, Mini-ITX (7 expansion slots) CPU Cooler: up to 160mm tall VGA: up to 320mm long & up to 140mm tall Power Supply: up to 220mm long 5.25” ODD Slots: 1 3.5” HDD Slots: 4 2.5” SSD Slots: 2 Dust Filter Bottom: Slide-out PSU Dust Filter Cooling Front: 120mm x 2 Cooling Rear: 120mm x 1 (included) Radiator Rear: 120mm I/O: USB (Universal Serial Bus) 3.0 x 1, USB (Universal Serial Bus) 2.0 x 1, HD Audio MIC & Headphone, Power LED (white), HDD LED (red)

Dimensions (Wx Hx D): 183 x 437 x 465 mm
- 7.20 x 17.20 x 18.30 inch

Materials: Steel, Plastic Weight: 4.8 Kg
- 10.6lbs Special

Features: Closed Front panel to block noise, Front panel side vents for good airflow, Large window sidepanel, pre-installed mainboard st&-offs, rubberized anti-slip casefeet, PSU dust filter

...

Available

Bitfenix Nova delivers style, performance & silence at an incredibly competitive price. Whether you plan to build a basic office, home or gaming system, Novas simplistic design, aluminum badge, color options & optional window side panel mean it will blend in perfectly. Long air vents running along the sides of its front, hidden behind sleek mesh strips, provide plenty of airflow to cool the system. & as a result allowed us to keep Novas top & front panel completely closed to block fan-noise from escaping the enclosure, & dust from building up inside. To seal fan noise inside the chassis, we developed a closed front panel for NOVA. Concealed behind our signature mesh strips running along the sides of the front panel, lie a series of 134 air vents, that let fresh air stream into the case effortlessly. Thanks to this noise-shield design of a raised, closed front panel with side vents, NOVA is capable of keeping even powerful components supplied with the airflow required to keep them cooled adequately, all the while confining the fan-noise to the interior of the chassis. NOVA offers a dual 120mm fan intake in the front, & a single 120mm exhaust in the rear, which when fully equipped results in excellent cooling performance, & a net positive air pressure inside the chassis, greatly reducing the buildup of dust. The frontal fan vents are positioned to channel fresh air directly over the storage drives, & onto the GPU & CPU, while the rear fan vent is positioned right above the CPU & supports even high-performance closed water-cooling systems. NOVA is available in pitch black & pure white to match your environment & perfectly blend in
- whether you plan a stealthy, dark, classy build or a modern, clean, pure looking white system. NOVA supports up to four full size 3.5" hard drives, two 2.5" compact hard drives or SSDs & features a full size 5.25" optical disc drive slot. More than enough for a brand new build, & plenty of space to migrate over older drives from an existing system. The angled front panel Interface of NOVA makes it easy to reach & use whether its on the floor, raised, or even standing on your desk. The large round power button is easy to find without even looking, while the reset button is purposely kept small & at the side of the panel. Two High Definition audio ports let you quickly connect a headset for a Skype call or to listen to your favorite music. To prevent dust from building up inside your power supply, causing its fan to spin at unnecessarily high speeds or even overheat & shut down, NOVA comes bundled with a dust filter you can quickly rinse & slide back. This not only reduces noise, but increases the lifetime of your power supply & keeps your system running reliably for years on-end. All the mainboard st&-offs come pre-installed, cutting down the time & effort of installing a system inside NOVA significantly. NOVA supports High Performance 120mm closed loop water coolers & CPU Heatsinks with a height of up to 160mm. & thanks to a large cut-out on the mainboard tray, installing optional metal brackets to support the additional weight of performance coolers is as easy as sliding off the rear side-panel to access the mainboards backside. With 7 expansion slots & a supported graphics card height of over 140mm, NOVA is ready for modern GPUs with a raised PCBs & larger, quieter heatsinks that extend beyond the traditional 110mm expansion card height.

Specification

Colour: White Motherboard: ATX, Micro ATX, Mini-ITX (7 expansion slots) CPU Cooler: up to 160mm tall VGA: up to 320mm long & up to 140mm tall Power Supply: up to 220mm long 5.25” ODD Slots: 1 3.5” HDD Slots: 4 2.5” SSD Slots: 2 Dust Filter Bottom: Slide-out PSU Dust Filter Cooling Front: 120mm x 2 Cooling Rear: 120mm x 1 (included) Radiator Rear: 120mm I/O: USB (Universal Serial Bus) 3.0 x 1, USB (Universal Serial Bus) 2.0 x 1, HD Audio MIC & Headphone, Power LED (white), HDD LED (red)

Dimensions (Wx Hx D): 183 x 437 x 465 mm
- 7.20 x 17.20 x 18.30 inch

Materials: Steel, Plastic Weight: 4.8 Kg
- 10.6lbs Special

Features: Closed Front panel to block noise, Front panel side vents for good airflow, pre-installed mainboard st&-offs, rubberized anti-slip casefeet, PSU dust filter

...

Available

Bitfenix Nova delivers style, performance & silence at an incredibly competitive price. Whether you plan to build a basic office, home or gaming system, Novas simplistic design, aluminum badge, color options & optional window side panel mean it will blend in perfectly. Long air vents running along the sides of its front, hidden behind sleek mesh strips, provide plenty of airflow to cool the system. & as a result allowed us to keep Novas top & front panel completely closed to block fan-noise from escaping the enclosure, & dust from building up inside. To seal fan noise inside the chassis, we developed a closed front panel for NOVA. Concealed behind a our signature mesh strips running along the sides of the front panel, lie a series of 134 air vents, that let fresh air stream into the case effortlessly. Thanks to this noise-shield design of a raised, closed front panel with side vents, NOVA is capable of keeping even powerful components supplied with the airflow required to keep them cooled adequately, all the while confining the fan-noise to the interior of the chassis. NOVA offers a dual 120mm fan intake in the front, & a single 120mm exhaust in the rear, which when fully equipped results in excellent cooling performance, & a net positive air pressure inside the chassis, greatly reducing the buildup of dust. The frontal fan vents are positioned to channel fresh air directly over the storage drives, & onto the GPU & CPU, while the rear fan vent is positioned right above the CPU & supports even high-performance closed water-cooling systems. NOVA is available in pitch black & pure white to match your environment & perfectly blend in
- whether you plan a stealthy, dark, classy build or a modern, clean, pure looking white system. While purists probably opt for the solid steel side panel version of NOVA to create a completely closed, monolithic build, we created an optional window side panel to let you & others have a look at all the nice parts, while conveniently hiding the less interesting & appeasing looking ones. Combined with color matched components & LED fans & light strips NOVAs large window means that you can create a truly unique & impressive looking system. NOVA supports up to four full size 3.5" hard drives, two 2.5" compact hard drives or SSDs & features a full size 5.25" optical disc drive slot. More than enough for a brand new build, & plenty of space to migrate over older drives from an existing system. The angled front panel Interface of NOVA makes it easy to reach & use whether its on the floor, raised, or even standing on your desk. The large round power button is easy to find without even looking, while the reset button is purposely kept small & at the side of the panel. Two High Definition audio ports let you quickly connect a headset for a Skype call or to listen to your favorite music. To prevent dust from building up inside your power supply, causing its fan to spin at unnecessarily high speeds or even overheat & shut down, NOVA comes bundled with a dust filter you can quickly rinse & slide back. This not only reduces noise, but increases the lifetime of your power supply & keeps your system running reliably for years on-end. All the mainboard st&-offs come pre-installed, cutting down the time & effort of installing a system inside NOVA significantly. NOVA supports High Performance 120mm closed loop water coolers & CPU Heatsinks with a height of up to 160mm. & thanks to a large cut-out on the mainboard tray, installing optional metal brackets to support the additional weight of performance coolers is as easy as sliding off the rear side-panel to access the mainboards backside. With 7 expansion slots & a supported graphics card height of over 140mm, NOVA is ready for modern GPUs with a raised PCBs & larger, quieter heatsinks that extend beyond the traditional 110mm expansion card height.

Specification

Colour: White Motherboard: ATX, Micro ATX, Mini-ITX (7 expansion slots) CPU Cooler: up to 160mm tall VGA: up to 320mm long & up to 140mm tall Power Supply: up to 220mm long 5.25” ODD Slots: 1 3.5” HDD Slots: 4 2.5” SSD Slots: 2 Dust Filter Bottom: Slide-out PSU Dust Filter Cooling Front: 120mm x 2 Cooling Rear: 120mm x 1 (included) Radiator Rear: 120mm I/O: USB (Universal Serial Bus) 3.0 x 1, USB (Universal Serial Bus) 2.0 x 1, HD Audio MIC & Headphone, Power LED (white), HDD LED (red)

Dimensions (Wx Hx D): 183 x 437 x 465 mm
- 7.20 x 17.20 x 18.30 inch

Materials: Steel, Plastic Weight: 4.8 Kg
- 10.6lbs Special

Features: Closed Front panel to block noise, Front panel side vents for good airflow, Large window sidepanel, pre-installed mainboard st&-offs, rubberized anti-slip casefeet, PSU dust filter

...

Available

BitFenix Nova Mesh TG Midi-Tower - Black

This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass and an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. Behind this lies a fine layer of Nylon, which functions as a dust filter. In spite of the fine mesh, any brightly illuminated fans installed behind it remain visible from the outside. The front panel includes the typical BitFenix logo on the front and features two pre-installed 120 mm fans, one of which is located in the back and includes RGB-LED. Furthermore, users will appreciate the presence of two 3, 5" slots, two 2, 5" slots as well as the possibility of installing additional fans if needed. The
Bitfenix Nova Mesh offers plenty of space for the majority of common configurations. Highlightsr: New version of the popular Nova TG Midi-Tower with fine mesh front panel Tinted, tempered glass side Supports gaming GPUs up to 36 cm in length Slots for 3x 120 mm- or 2x 140 mm fans in the front and 2x 120 in the roof Two pre-installed fans for great airflow, perfect for air-cooled setups Space for 240 mm radiator in roof and up to 280/360 radiator in front Space for 2x 3, 5/2, 5- and 3x 2, 5" drives BitFenix Nova Mesh TG: Sleek Midi-Tower in Black The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without
compromising on aesthetics. Quite to the contrary, the case cuts an elegant and timeless figure and stands out from the competition. The clean lines and sleek design not only look good, they fulfil a purpose: The BitFenix Nova Mesh TG keeps out unwanted dust while also minimising noise. Both basic versions of the Nova Mesh TG can be differentiated by their left side panels (with or without tempered glass). BitFenixs modern approach to design also means that the motherboard is located towards the top of the case and the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust and dirt, also
helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass. Plenty of Space for Well-Cooled Hardware A large cut-out in the motherboard tray enables users to benefit from convenient and easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2, 5/3, 5" slots are available in the HDD cage beneath the PSU shroud. Two 2, 5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components. The cases cooling is catered for by up to three 120- or two 140 mm fans in the
front, a 120 mm fan comes pre-installed. Additionally, the roof offers space for two additional 120 mm fans. The pre-installed 120 mm RGB-LED fan in the rear ensures heat is exhausted and dissipated efficiently. Thanks to the fine mesh front and dust filter in the roof, the interior is sure to remain clean and dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans - with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforehand. The I/O panel located on top of the case towards the front includes two USB 3.0- and two audio ports. This is complemented by the inclusion of a power- and reset switch. Technical Details: Dimensions: 201 x 437 x
465 mm (W x H x D) Material: Steel, ABS plastic, tempered glass Colour: Black Weight: 5, 3kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (Front) 2x 120 mm (Roof) 1x 120 mm (Rear) Pre-installed: 1x 120 mm (Front) 1x 120 mm (Rear, RGB-LEDs) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (roof) 1x max. 120 mm (rear) Drives: 2x 2, 5/3, 5" (internal) 3x 2, 5" (internal) Expansion slots: 7 I/O Panel: 2x USB 3.0 1x HD-Audio In/Out 1x Power Button 1x Reset Button PSU: Standard PS2 ATX-Format (optional) Max GPU length: 360 mm Max CPU cooler height: 160 mm Max PSU length: 220 mm

Availability: In Stock
Supplier: Ebuyer
SKU: 947270

Description Reviews / Comments Add New

Product Description

This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass & an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. Behind this lies a fine layer of Nylon, which functions as a dust filter. In spite of the fine mesh, any brightly illuminated fans installed behind it remain visible from the outside. The front panel

Includes:: the typical Bit Fenix logo on the front & features two pre-installed 120 mm fans, one of which is located in the back &

Includes:: RGB-LED. Furthermore, users will appreciate the presence of two 3, 5" slots, two 2, 5" slots as well as the possibility of installing additional fans if needed. The Bitfenix Nova Mesh offers plenty of space for the majority of common configurations. Highlightsr: New version of the popular Nova TG Midi-Tower with fine mesh front panel Tinted, tempered glass side Supports gaming GPUs up to 36 cm in length Slots for 3x 120 mm- or 2x 140 mm fans in the front & 2x 120 in the roof Two pre-installed fans for great airflow, perfect for air-cooled setups Space for 240 mm radiator in roof & up to 280/360 radiator in front Space for 2x 3, 5/2, 5- & 3x 2, 5" drives Bit Fenix Nova Mesh TG: Sleek Midi-Tower in Black The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without compromising on aesthetics. Quite to the contrary, the case cuts an elegant & timeless figure & stands out from the competition. The clean lines & sleek design not only look good, they fulfil a purpose: The Bit Fenix Nova Mesh TG keeps out unwanted dust while also minimising noise. Both basic versions of the Nova Mesh TG can be differentiated by their left side panels (with or without tempered glass). Bit Fenixs modern approach to design also means that the motherboard is located towards the top of the case & the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust & dirt, also helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass. Plenty of Space for Well-Cooled Hardware A large cut-out in the motherboard tray enables users to benefit from convenient & easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2, 5/3, 5" slots are available in the HDD cage beneath the PSU shroud. Two 2, 5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components. The cases cooling is catered for by up to three 120- or two 140 mm fans in the front, a 120 mm fan comes pre-installed. in addition, the roof offers space for two additional 120 mm fans. The pre-installed 120 mm RGB-LED fan in the rear ensures heat is exhausted & dissipated efficiently. Thanks to the fine mesh front & dust filter in the roof, the interior is sure to remain clean & dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans
- with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforeh&. The I/O panel located on top of the case towards the front

Includes:: two USB (Universal Serial Bus) 3.0- & two audio ports. This is complemented by the inclusion of a power- & reset switch. Technical

Details: Dimensions: 201 x 437 x 465 mm (W x H x D)

Material: Steel, ABS plastic, tempered glass

Colour: Black Weight: 5, 3kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (Front) 2x 120 mm (Roof) 1x 120 mm (Rear) Pre-installed: 1x 120 mm (Front) 1x 120 mm (Rear, RGB-LEDs) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (roof) 1x max. 120 mm (rear) Drives: 2x 2, 5/3, 5" (internal) 3x 2, 5" (internal) Expansion slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x HD-Audio In/ Out 1x Power Button 1x Reset Button PSU: Standard PS2 ATX-Format (optional) Max GPU length: 360 mm Max CPU cooler

Height: 160 mm Max PSU length: 220 mm

Reviews/Comments

Add New

Jargon Buster

USB - Universal Serial Bus

LED - Light Emitting Diode - a small light source

Nylon - A family of synthetic polymers

HDD - Hadr disk drive - an electronic storage media

Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.

Steel - An alloy made predominately of Iron combined with <2% carbon

CPU - Central processing unit. The processing centre of computer programs. The faster the processor usually the faster the computer

HDD - Hard Disk Drive, an electronic storage device

Plastic - A generic term for a synthetic product used in the manufacture of products

Heat - A term used to define thermal energy

Cm - Centimetres, one centimetre is equal to 10 milimetres

Glass - A solid, typically transparent. Brittle and used in windows. The first patent granted in the UK was for Glass.

Button - A round or square object used for fastening clothing or other items

Filter - A device used to separate mixtures

Filter - An optical device to remove or enhance particular wavelengths of light.

button - A small fastener used on clothing to secure two pieces of fabric together.

Stylish - A desirable design or layout

Dust - A general term used for micro particles in the atmosphere

Screws - A simple device use for physically attaching two objects together

MIDI - Musical Instrument Digital Interface - an industry standard to allow devices and musical instrument to interact.

Audio - Also known as sound. An audible vibration wave which can be heard.

Colour - The categorised spectrum of light visable to humans

weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz

overheating - When a device of object becomes too hot. Can also refer to economic markets to describe demand outstripping supply.

Size - is the measurement of how big an object is in space.

Components - Multiple items used to complete the product.

USB - Universal Serial Bus. A method of connecting a device to a computer

Large - something that takes up more space than normal.

LED - Light Emitting Diode. A bulb that is very efficient at producing light. Often small.

Cage - an object that is used to contain something, often animals.

Logo - A symbol that is usually associated with a brand or product.

Radiator - A household item that warms a room.

Minimise - To reduce or lower the amount of something.

Layer - Adding extra quantities of materials for extra practical benefits, e.g. warmth.

Dimensions - The shapes and angles of something or a situation.

Popular - Something that is admired and liked by many people.

technical - Something that relates to a good level of skill and methods.

Design - A drawing or styles that shows the look and functionality of something before its made.

Interior - The inside of something, usually what is not visible.

Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.

Mesh - A material mad up of crossed over fibres such as metal or thread.

Fan - A piece of equipment that has blades that rotate to cool the air, can be installed within other equipment,

Convenient - Something that suits and fits well to other activities.

Supplier Information

Ebuyer

Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.

More From Contributor

BitFenix Nova Mesh TG Midi-Tower - Black

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account