The Bit Fenix Enso Mesh is an impressive Midi-Tower case with a modern design. The latest addition to the Enso line is notable for its distinct mesh front panel, which not only enhances the cases airflow but acts as a filter for dust & other debris. The corners of the front panel have addressable RGB lighting that can be synced with other RGB components to create impressive effects. The case in addition offers compatibility with Asuss Aura Sync technology to allow for precise control of all RGB LED elements. The Bitfenix Enso Mesh at a glance: Premium quality case Eye-catching Mesh front-panel for enhanced airflow Addressable RGB front lighting as standard Accepts up to E-ATX motherboards Tempered glass side panel The Bitfenix Enso Mesh in detail: The Bitfenix Enso Mesh is compact Midi-Tower that can hold motherboards from Mini-ITX- up to E-ATX form factors. It features a prominent mesh front panel which improves air flow intake whilst filtering dust to considerably improve air circulation throughout the case. The mesh panel combined with the RGB LED components on front panel give the Bitfenix Enso Mesh a remarkably futuristic look. The cases design is further enhanced by a large tempered glass side panel that lets hardware enthusiast show off their systems components. The panel is 4 mm thick & has a rubber seal to reduce noise. Since the Bitfenix Enso Mesh is Aura sync compatible, any RGB LED components connected to the case can be controlled & fined tuned. Simply connect the components to a compatible motherboard, & the effects can be configured via software. Excellent cable management options The interior of Bit Fenix Enso Mesh has space for two 3.5" or 2.5" drives, which can be neatly installed inside the PSU shroud. The back of the case is equipped with a 120mm RGB fan. In addition, a total of three 120mm fans can be installed in the front & two on the top cover. The ventilation openings in the front, bottom & lid are all equipped with dust filters that can be removed without tools. The front of the Enso Mesh can accommodate 240mm, 280mm or 360mm radiators while up to a 120mm radiator can be fitted to the back. Specification: Dimensions: 210 x 489 x 452mm (W x H x D)

Material: Steel, plastic, tempered glass Weight: 7kg

Colour: Black Motherboard support: E-ATX, ATX, Micro-ATX, Mini-ITX Total Possible Fans: 3x 120mm / 2 x 140 mm (front) 1x 120mm (rear) 2x 120 mm (top) Pre-Installed: 1x 120 mm (front) 1x 120 mm static RGB (rear) Radiator Mountings: 1x 360/280/240 mm (front) 1x 120mm (rear) Drive Bays: 2x 3.5/2.5 inch (internal) 3x 2.5 inch (internal) Power Supply: 1x standard ATX up to 160 mm (optional) Expansion Slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 (internal connection) 1x per audio In/ Out Maximum GPU Length: 340 mm Maximum CPU Cooler

Height: 160 mm Connectors RGB Controller: 1x 4-pin RGB 2x 3-pin RGB 1x Front button 1x SATA power cable





...

The Bit Fenix Enso Mesh is an impressive Midi-Tower case with a modern design. The latest addition to the Enso line is notable for its distinct mesh front panel, which not only enhances the cases airflow but acts as a filter for dust & other debris. The corners of the front panel have addressable RGB lighting that can be synced with other RGB components to create impressive effects. The case in addition offers compatibility with Asuss Aura Sync technology to allow for precise control of all RGB LED elements. The Bitfenix Enso Mesh at a glance: Premium quality case Eye-catching Mesh front-panel for enhanced airflow Addressable RGB front lighting as standard Accepts up to E-ATX motherboards Tempered glass side panel The Bitfenix Enso Mesh in detail: The Bitfenix Enso Mesh is compact Midi-Tower that can hold motherboards from Mini-ITX- up to E-ATX form factors. It features a prominent mesh front panel which improves air flow intake whilst filtering dust to considerably improve air circulation throughout the case. The mesh panel combined with the RGB LED components on front panel give the Bitfenix Enso Mesh a remarkably futuristic look. The cases design is further enhanced by a large tempered glass side panel that lets hardware enthusiast show off their systems components. The panel is 4 mm thick & has a rubber seal to reduce noise. Since the Bitfenix Enso Mesh is Aura sync compatible, any RGB LED components connected to the case can be controlled & fined tuned. Simply connect the components to a compatible motherboard, & the effects can be configured via software. Excellent cable management options The interior of Bit Fenix Enso Mesh has space for two 3.5" or 2.5" drives, which can be neatly installed inside the PSU shroud. The back of the case is equipped with a 120mm RGB fan. In addition, a total of three 120mm fans can be installed in the front & two on the top cover. The ventilation openings in the front, bottom & lid are all equipped with dust filters that can be removed without tools. The front of the Enso Mesh can accommodate 240mm, 280mm or 360mm radiators while up to a 120mm radiator can be fitted to the back. Specification: Dimensions: 210 x 489 x 452mm (W x H x D)

Material: Steel, plastic, tempered glass Weight: 7kg

Colour: White Motherboard support: E-ATX, ATX, Micro-ATX, Mini-ITX Total Possible Fans: 3x 120mm / 2 x 140 mm (front) 1x 120mm (rear) 2x 120 mm (top) Pre-Installed: 1x 120 mm (front) 1x 120 mm static RGB (rear) Radiator Mountings: 1x 360/280/240 mm (front) 1x 120mm (rear) Drive Bays: 2x 3.5/2.5 inch (internal) 3x 2.5 inch (internal) Power Supply: 1x standard ATX up to 160 mm (optional) Expansion Slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 (internal connection) 1x per audio In/ Out Maximum GPU Length: 340 mm Maximum CPU Cooler

Height: 160 mm Connectors RGB Controller: 1x 4-pin RGB 2x 3-pin RGB 1x Front button 1x SATA power cable





...

The Bit Fenix Enso Midi-Tower is a particularly stylish representative of its genre. It is equipped with Aura Sync compatible RGB lighting including a controller & large tempered glass side panel. The tidy interior design allows storage devices to disappear in the PSU shroud & behind the motherboard tray, as well as providing excellent airflow, water cooling support & two pre-installed 120 mm fans. In addition, the case has enough room for E-ATX motherboards, clean cable management & dust filters that can be removed in no time at all. The Features of the Bit Fenix Enso Midi-Tower at a Glance Extremely stylish midi tower for motherboards up to E-ATX Metal front with integrated RGB lighting & controller Large side panel made from tempered glass with sound insulation I/O Panel with 2x USB (Universal Serial Bus) 3.0 & HD-Audio In/ Out Support for two 280 & 120 mm format radiators 2x 3.5/2.5 inch & 3x 2.5 inch disk slots 2x 120 mm fans pre-installed
- total 5 possible Graphics cards up to 34 cm long & CPU cooler up to 16 cm The Features of the Bit Fenix Enso Midi-Tower in Detail The exterior of the housing projects a captivating futuristic look in the form of a matt black surface, large tempered glass side windows &, of course, RGB lighting embedded in the front panel. With a compatible ASUS motherboard, this can be easily configured via software & synchronised with other RGB components in complex lighting effects. It can also be controlled manually via an integrated controller & connected to other RGB components. The interior of the compact Midi-Tower offers compatibility with Mini-ITX- up to E-ATX format motherboards. Two 3, 5" or 2, 5" drives can be installed in a cage in the PSU shroud, while three 2, 5" storage devices can be concealed behind the motherboard tray. Hardware & cooling components are presented behind the window which consists of 4 mm thick tempered glass in a particularly clean look. The rear of the housing is equipped with a 120 mm RGB fan, while the front panel features a model without lighting for continuous air circulation. In addition, a total of two 120 mm fans can be installed in the front & in the cover. Two 140 mm models are also available in the front. The ventilation openings in the front, bottom & lid are all equipped with dust filters that can be removed without tools. The Tempered Glass Panel is sealed with rubber for noise insulation & a mesh cover for increased airflow is included in the bundle for the opening in the lid. In the front, the Enso can accommodate radiators in 240 or 280 mm format up to 3.5cm thick & can accommodate a 120 mm counterpart in the rear. CPU coolers can be up to 16 centimetres high & powerful graphics cards up to 34 centimetres can also be fitted. Technical

Details: Dimensions: 210 x 489 x 454 mm (W x H x D)

Material: Steel, plastic, tempered glass

Colour: Black Weight: 7kg Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX Fans possible: 2x 120/140 mm (front) 1x 120 mm (back side) 2x 120 mm (cover) Pre-installed: 1x 120 mm (front side) 1x 120 mm static RGB (back side) Radiators possible: 1x 280 mm or 1x 240 mm (front) 1x 120 mm (back side) Drives: 2x 3.5/2.5 inch (internal) 3x 2.5 inch (internal) Extension slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 (internal connection) 1x per audio In/ Out Power supply: 1x standard ATX up to 160 mm (optional) Maximum graphics card length: 340mm Maximum CPU cooler

Height: 160mm Connectors RGB Controller: 1x 4-pin RGB 2x 3-pin RGB 1x Front button 1x SATA power cable








...

With input from some of the worlds most prolific case modders, Bit Fenix Alchemy Multisleeved Cables offer a premium ultra-dense weave & a unique multisleeved construction for an unparalleled look. These premium cables feature precision molded connectors, & come in a variety of colors & cable types, enabling modders to transform normal PCs into objects of wonderment. Premium Ultra-Dense Weave One look & its easy to see why Bit Fenix Alchemy Multisleeved Cables are superior to the competition. They use a premium ultra-dense weave
- several times denser than your typical sleeved cable. This level of quality means is that the cable underneath the sleeve is completely not visible, making Alchemy Multisleeved Cables the best available on the market. Multi-Sleeved Construction Alchemy Multisleeved Cables dont cut any corners. Each individual cable is wrapped in that luxurious premium ultra-dense weave sleeves, giving the entire cable a unique look. Multiple Colors & Cable Types Alchemy Multisleeved Cables come in a large variety of colors & cable types. No matter what creation you are picturing, Alchemy as the right cables to complete your vision. High Quality Cable Assembly Alchemy Multisleeved Cables are manufactured using the strictest manufacturing procedures & standards, ensuring that every cable not only looks great, but also performs as a cable should. Precision Molded Connectors All Alchemy Multisleeved Cable connectors are precision crafted to comply with connector size & shape standards. This means that completing your modding project with them is always headache-free.
...

Getting a quality gaming chassis doesn’t necessarily mean spending a small fortune. Introducing Bit Fenix Merc–an unprecedented value in gaming cases. Merccomes in two flavors: Merc Alpha & Merc Beta, which gives you the option of going with additional fan locations, or choosing a more streamlined look. Ample expansion possibilities mean your Merccan grow with the rest of your system, while friendly DIY features make system installation headache-free. Armed with multiple fan locations & rich connectivity, Merclets you get your game on without breaking the bank. Features • Ample Expansion – Three 5.25", seven 3.5", one 2.5" bays & seven PCI slots • Rich Connectivity – Four high-speed USB (Universal Serial Bus) 2.0 ports included • Effective Cooling – Eight 120mm fan locations on Alpha, six on Beta • Easy Installation – Complete with cable management, a CPU cutout, & thumbscrews • Impressive value – Black coated interior & quality black cabling Specifications
- Dimensions: 439 x 190 x 490mm
- Motherboard Support: Mini-ITX, Micro ATX, ATX
- 5.25" Drive Bays x 3
- 3.5" Drive Bays x 7
- 2.5" Drive Bays x 1
- Front Cooling: 2 x 120mm Fan (not included)
- Rear Cooling: 1 x 120mm Fan
- Side Panel: 2 x 120mm (not included)
- Expansion Slots: 7
- I/O Ports: 4 x USB2.0 / 2 x Audio









...

This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass & an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. In spite of the fine mesh, the brightly illuminated fans installed behind it remain visible from the outside. The front panel

Includes:: the typical Bit Fenix logo on the front & features three pre-installed 120 mm fans, while the fourth is placed at the back. All four fans have digitally addressable RGB-LEDs. Furthermore, users will appreciate the presence of two 3, 5" slots, two 2, 5" slots as well as the possibility of installing additional fans if needed. The Bitfenix Nova Mesh offers plenty of space for the majority of common configurations. The Highlights of the Bit Fenix Nova Mesh A-RGB TG Midi-Tower: New version of the popular Nova TG Midi-Tower with fine mesh front panel Tinted, tempered glass side, motherboards up to a E-ATX formfactor Supports gaming GPUs up to 36 cm in length Slots for 3x 120 mm- or 2x 140 mm fans in the front & 2x 120 in the roof Four pre-installed fans with digitally addressable RGB LEDs Space for 240 mm radiator in roof & up to 280/360 radiator in front Space for 2x 3, 5/2, 5- & 3x 2, 5" drives Bit Fenix Nova Mesh A-RGB TG: Sleek Midi-Tower in Black The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without compromising on aesthetics. Quite to the contrary, the case cuts an elegant & timeless figure & stands out from the competition. The clean lines & sleek design not only look good, they fulfil a purpose: The Bit Fenix Nova Mesh A-RGB TG keeps out unwanted dust while also minimising noise. Bit Fenixs modern approach to design also means that the motherboard is located towards the top of the case & the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust & dirt, also helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass. Plenty of Space for Well-Cooled Hardware A large cut-out in the motherboard tray enables users to benefit from convenient & easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2, 5/3, 5" slots are available in the HDD cage beneath the PSU shroud. Two 2, 5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components. The cases cooling is catered for by up to three 120- or two 140 mm fans in the front. in addition, the roof offers space for two additional 120 mm fans. There are four pre-installed 120 mm fans with digitally addressable RGB-LED lighting from Bit Fenix Spectre Series, one in the rear & three in the front that ensure heat is exhausted & dissipated efficiently. Thanks to the fine mesh front & dust filter in the roof, the interior is sure to remain clean & dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans
- with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforeh&. The I/O panel located on top of the case towards the front

Includes:: two USB (Universal Serial Bus) 3.0- & two audio ports. This is complemented by the inclusion of a power- & reset switch. Technical

Details: Dimensions: 201 x 437 x 465 mm (W x H x D)

Material: Steel, ABS plastic, tempered glass

Colour: Black Weight: 5.3kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (Front) 2x 120 mm (Roof) 1x 120 mm (Rear) Pre-installed: 3x 120 mm (Front, digitally addressable RGB-LEDs) 1x 120 mm (Rear, digitally addressable RGB-LEDs) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (roof) 1x max. 120 mm (rear) Drives: 2x 2, 5/3, 5" (internal) 3x 2, 5" (internal) Extension slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x HD-Audio In/ Out 1x Power Button 1x Reset Button Power supply: Standard PS2 ATX format (optional) Maximum graphics card length: 360mm Maximum CPU cooler

Height: 160mm Maximum power supply length: 220mm












...

This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass & an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. In spite of the fine mesh, the brightly illuminated fans installed behind it remain visible from the outside. The front panel

Includes:: the typical Bit Fenix logo on the front & features three pre-installed 120 mm fans, while the fourth is placed at the back. All four fans have digitally addressable RGB-LEDs. Furthermore, users will appreciate the presence of two 3, 5" slots, two 2, 5" slots as well as the possibility of installing additional fans if needed. The Bitfenix Nova Mesh offers plenty of space for the majority of common configurations. The Highlights of the Bit Fenix Nova Mesh A-RGB TG Midi-Tower: New version of the popular Nova TG Midi-Tower with fine mesh front panel Tinted, tempered glass side, motherboards up to a E-ATX formfactor Supports gaming GPUs up to 36 cm in length Slots for 3x 120 mm- or 2x 140 mm fans in the front & 2x 120 in the roof Four pre-installed fans with digitally addressable RGB LEDs Space for 240 mm radiator in roof & up to 280/360 radiator in front Space for 2x 3, 5/2, 5- & 3x 2, 5" drives Bit Fenix Nova Mesh A-RGB TG: Sleek Midi-Tower in White The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without compromising on aesthetics. Quite to the contrary, the case cuts an elegant & timeless figure & stands out from the competition. The clean lines & sleek design not only look good, they fulfil a purpose: The Bit Fenix Nova Mesh A-RGB TG keeps out unwanted dust while also minimising noise. Bit Fenixs modern approach to design also means that the motherboard is located towards the top of the case & the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust & dirt, also helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass. Plenty of Space for Well-Cooled Hardware A large cut-out in the motherboard tray enables users to benefit from convenient & easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2, 5/3, 5" slots are available in the HDD cage beneath the PSU shroud. Two 2, 5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components. The cases cooling is catered for by up to three 120- or two 140 mm fans in the front. in addition, the roof offers space for two additional 120 mm fans. There are four pre-installed 120 mm fans with digitally addressable RGB-LED lighting from Bit Fenix Spectre Series, one in the rear & three in the front that ensure heat is exhausted & dissipated efficiently. Thanks to the fine mesh front & dust filter in the roof, the interior is sure to remain clean & dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans
- with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforeh&. The I/O panel located on top of the case towards the front

Includes:: two USB (Universal Serial Bus) 3.0- & two audio ports. This is complemented by the inclusion of a power- & reset switch. Technical

Details: Dimensions: 201 x 437 x 465 mm (W x H x D)

Material: Steel, ABS plastic, tempered glass

Colour: White Weight: 5.3kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (Front) 2x 120 mm (Roof) 1x 120 mm (Rear) Pre-installed: 3x 120 mm (Front, digitally addressable RGB-LEDs) 1x 120 mm (Rear, digitally addressable RGB-LEDs) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (roof) 1x max. 120 mm (rear) Drives: 2x 2, 5/3, 5" (internal) 3x 2, 5" (internal) Extension slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x HD-Audio In/ Out 1x Power Button 1x Reset Button Power supply: Standard PS2 ATX format (optional) Maximum graphics card length: 360mm Maximum CPU cooler

Height: 160mm Maximum power supply length: 220mm












...

This case is the mesh version of the simple, but attractive Nova Midi-Tower & puts the focus on air cooling. In this variant, the entire front is made from a close-meshed metal mesh grid to maximize airflow. Behind it is a layer of fine nylon fabric that serves as a dust filter. In spite of the fine mesh, illuminated fans placed behind it are clearly visible from the outside. The front panel also features the typical Bit Fenix logo on the front & a 120mm fan built into the rear. Users can also expect two 3.5-inch slots, two 2.5-inch slots & the option of installing additional fans. The Bit Fenix Nova Mesh thus offers plenty of space for the most common configurations. The Features of the Bit Fenix Nova at a Glance: Black midi-tower from Bit Fenix with fine mesh front Compatible with ATX-, Micro-ATX- & Mini-ITX motherboards

Includes:: 120 mm fan on the rear Slots for 3x 120mm or 2x 140mm fans on the front & 2x 120mm fans on the top Room for 240mm radiator on top & up to 280/360mm on front Place for 2x 3.5/2.5- & 3x 2.5-inch drives 2x USB (Universal Serial Bus) 3.0, 2x 3.5mm jack (1x each AD Audio In / Out) Bit Fenix Nova Mesh: Plain Midi Tower in Black The front panel with the fine mesh perfectly combines the need for attractive aesthetics with airflow. The case makes no compromises in terms of its appearance. On the contrary: the design is timelessly elegant & looks as if it were made from a single moulded piece. The seamless design not only looks great, it also serves a purpose, because the Bit Fenix Nova Mesh is designed to fight against dust & annoying hardware noises. The two basic versions of the Nova Mesh case (with & without tempered glass side panel) differ on the left side panel. Thanks to its modern design, the motherboard is installed at the top & the power supply at the bottom. This offers the advantage of a separate fresh air inlet for the power supply unit through the floor, thus reducing overall heat build-up. A dust filter protects the power supply from the ingress of dirt & the prevents overheating. A power supply cover hides any unsightly cable clutter. Space for Well-Cooled Hardware A large cut-out in the motherboard tray allows for the easy & straightforward installation of compatible CPU coolers. Expansion cards can be mounted by easily removable screws. Two internal 2.5/3.5-inch slots are available in the HDD cage under the power supply cover. Two 2.5-inch drives are located on the back of the motherboard tray, & another one can be screwed onto the power supply cover. All in all, theres plenty of room for full-size hardware. When it comes to cooling, up to three 120 or two 140 fans can be installed on the front. In addition, two 120 mm fans can be mounted on top. Together with the pre-installed 120 mm fan on the rear, this makes for an impressive maximum of six 120 mm fans, ensuring your hard-earned hardware receives the best possible cooling. Thanks to the fine mesh front & the dust filter on the lid, the interior will remain clean & low-maintenance for years to come. Of course, you can install compatible radiators instead of the fans if you prefer, for example a 360 or a 280 at the front. On the top there is a somewhat narrow space for a 240 mm radiator. The I/O panel in the upper offers two USB (Universal Serial Bus) 3.0 & two HD audio connections. The connectors are complemented by the addition of a power switch & a reset switch. Technical

Details: Dimensions: 210 x 437 x 460 mm (W x H x D)

Material: Steel, plastic

Colour: Black Weight: 4.8kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (front) 2x 120 mm (cover) 1x 120 mm (rear) Pre-installed: 1x 120 mm (rear) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (cover) 1x max. 120 mm (rear) Drives: 2x 2.5/3.5 inch (internal) 3x 2.5 inch (internal) Expansion slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x each HD Audio In/ Out 1x Power button 1x Reset button PSU: Standard PS2 ATX-Format (optional) Max GPU length: 360mm Max CPU cooler

Height: 160mm Max PSU length: 220mm









...

This case is the mesh version of the simple, but attractive Nova Midi-Tower & puts the focus on air cooling. In this variant, the entire front is made from a close-meshed metal mesh grid to maximize airflow. Behind it is a layer of fine nylon fabric that serves as a dust filter. In spite of the fine mesh, illuminated fans placed behind it are clearly visible from the outside. The front panel also features the typical Bit Fenix logo on the front & a 120mm fan built into the rear. Users can also expect two 3.5-inch slots, two 2.5-inch slots & the option of installing additional fans. The Bit Fenix Nova Mesh thus offers plenty of space for the most common configurations. The Features of the Bit Fenix Nova at a Glance: White midi-tower from Bit Fenix with fine mesh front Compatible with ATX-, Micro-ATX- & Mini-ITX motherboards

Includes:: 120 mm fan on the rear Slots for 3x 120mm or 2x 140mm fans on the front & 2x 120mm fans on the top Room for 240mm radiator on top & up to 280/360mm on front Place for 2x 3.5/2.5- & 3x 2.5-inch drives 2x USB (Universal Serial Bus) 3.0, 2x 3.5mm jack (1x each AD Audio In / Out) Bit Fenix Nova Mesh: Plain Midi Tower in White The front panel with the fine mesh perfectly combines the need for attractive aesthetics with airflow. The case makes no compromises in terms of its appearance. On the contrary: the design is timelessly elegant & looks as if it were made from a single moulded piece. The seamless design not only looks great, it also serves a purpose, because the Bit Fenix Nova Mesh is designed to fight against dust & annoying hardware noises. The two basic versions of the Nova Mesh case (with & without tempered glass side panel) differ on the left side panel. Thanks to its modern design, the motherboard is installed at the top & the power supply at the bottom. This offers the advantage of a separate fresh air inlet for the power supply unit through the floor, thus reducing overall heat build-up. A dust filter protects the power supply from the ingress of dirt & the prevents overheating. A power supply cover hides any unsightly cable clutter. Space for Well-Cooled Hardware A large cut-out in the motherboard tray allows for the easy & straightforward installation of compatible CPU coolers. Expansion cards can be mounted by easily removable screws. Two internal 2.5/3.5-inch slots are available in the HDD cage under the power supply cover. Two 2.5-inch drives are located on the back of the motherboard tray, & another one can be screwed onto the power supply cover. All in all, theres plenty of room for full-size hardware. When it comes to cooling, up to three 120 or two 140 fans can be installed on the front. In addition, two 120 mm fans can be mounted on top. Together with the pre-installed 120 mm fan on the rear, this makes for an impressive maximum of six 120 mm fans, ensuring your hard-earned hardware receives the best possible cooling. Thanks to the fine mesh front & the dust filter on the lid, the interior will remain clean & low-maintenance for years to come. Of course, you can install compatible radiators instead of the fans if you prefer, for example a 360 or a 280 at the front. On the top there is a somewhat narrow space for a 240 mm radiator. The I/O panel in the upper offers two USB (Universal Serial Bus) 3.0 & two HD audio connections. The connectors are complemented by the addition of a power switch & a reset switch. Technical

Details: Dimensions: 210 x 437 x 460 mm (W x H x D)

Material: Steel, plastic

Colour: White Weight: 4.8kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (front) 2x 120 mm (cover) 1x 120 mm (rear) Pre-installed: 1x 120 mm (rear) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (cover) 1x max. 120 mm (rear) Drives: 2x 2.5/3.5 inch (internal) 3x 2.5 inch (internal) Extension slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x each HD Audio In/ Out 1x Power button 1x Reset button Power supply: Standard PS2 ATX format (optional) Maximum graphics card length: 360mm Maximum CPU cooler

Height: 160mm Maximum power supply length: 220mm









...

This case is the Mesh version of the straightforward yet stylish Nova Midi-Tower with Tempered Glass & an additional focus on air cooling. This variant implements a front section that consists entirely of a fine mesh metal grille to enable the maximum possible airflow. Behind this lies a fine layer of Nylon, which functions as a dust filter. In spite of the fine mesh, any brightly illuminated fans installed behind it remain visible from the outside. The front panel

Includes:: the typical Bit Fenix logo on the front & features two pre-installed 120 mm fans, one of which is located in the back &

Includes:: RGB-LED. Furthermore, users will appreciate the presence of two 3, 5" slots, two 2, 5" slots as well as the possibility of installing additional fans if needed. The Bitfenix Nova Mesh offers plenty of space for the majority of common configurations. Highlightsr: New version of the popular Nova TG Midi-Tower with fine mesh front panel Tinted, tempered glass side Supports gaming GPUs up to 36 cm in length Slots for 3x 120 mm- or 2x 140 mm fans in the front & 2x 120 in the roof Two pre-installed fans for great airflow, perfect for air-cooled setups Space for 240 mm radiator in roof & up to 280/360 radiator in front Space for 2x 3, 5/2, 5- & 3x 2, 5" drives Bit Fenix Nova Mesh TG: Sleek Midi-Tower in Black The front panel, with its fine mesh grill, makes the case perfect to meet the challenges of providing a steady stream of fresh air for high-end gaming hardware while still looking good. The result is that airflow is maintained without compromising on aesthetics. Quite to the contrary, the case cuts an elegant & timeless figure & stands out from the competition. The clean lines & sleek design not only look good, they fulfil a purpose: The Bit Fenix Nova Mesh TG keeps out unwanted dust while also minimising noise. Both basic versions of the Nova Mesh TG can be differentiated by their left side panels (with or without tempered glass). Bit Fenixs modern approach to design also means that the motherboard is located towards the top of the case & the power supply at the bottom. This offers the advantage of giving power supplies a separate supply of clean, fresh air through the bottom of the case to help minimise the transfer of heat to other internal components. A dust filter protects the PSU from dust & dirt, also helping to minimise the possibility of overheating over time. A shroud for the PSU conceals any messy cabling that would otherwise be visible through the tinted tempered glass. Plenty of Space for Well-Cooled Hardware A large cut-out in the motherboard tray enables users to benefit from convenient & easy installation of their CPU cooler. Expansion cards can be installed using the (easily removed) screws. Two internal 2, 5/3, 5" slots are available in the HDD cage beneath the PSU shroud. Two 2, 5" drives are located on the rear of the motherboard tray, an additional drive can be screwed onto the PSU shroud. All in all, the case offers an impressive amount of space for full-size hardware components. The cases cooling is catered for by up to three 120- or two 140 mm fans in the front, a 120 mm fan comes pre-installed. in addition, the roof offers space for two additional 120 mm fans. The pre-installed 120 mm RGB-LED fan in the rear ensures heat is exhausted & dissipated efficiently. Thanks to the fine mesh front & dust filter in the roof, the interior is sure to remain clean & dust-free over time. Of course, if you prefer, you can also use compatible radiators instead of fans
- with a 360- or a 280 in the front. The top of the case reserves just enough space for a 240 mm radiator, but please be sure to check with the manufacturer beforeh&. The I/O panel located on top of the case towards the front

Includes:: two USB (Universal Serial Bus) 3.0- & two audio ports. This is complemented by the inclusion of a power- & reset switch. Technical

Details: Dimensions: 201 x 437 x 465 mm (W x H x D)

Material: Steel, ABS plastic, tempered glass

Colour: Black Weight: 5, 3kg Form factor: E-ATX (up to 272 mm), ATX, Micro-ATX, Mini-ITX Fans possible: 3x 120 mm / 2x 140 mm (Front) 2x 120 mm (Roof) 1x 120 mm (Rear) Pre-installed: 1x 120 mm (Front) 1x 120 mm (Rear, RGB-LEDs) Radiators possible: 1x max. 360/280 mm (front) 1x max. 240 mm (roof) 1x max. 120 mm (rear) Drives: 2x 2, 5/3, 5" (internal) 3x 2, 5" (internal) Expansion slots: 7 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x HD-Audio In/ Out 1x Power Button 1x Reset Button PSU: Standard PS2 ATX-Format (optional) Max GPU length: 360 mm Max CPU cooler

Height: 160 mm Max PSU length: 220 mm














...