Arctic F9 Pwm 90mm Case Fan Long Service Life The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life Perfect Case Fan Regulation with PWM The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling & minimizes the noise level. Innovative Design Enables Quiet & Efficient Ventilation The innovative design of the fan blades improves the air flow & facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow & pressure. Two Way installation Blow warm air out of the case Draw cool air into your case Product Specifications Attributes Fan Diameter 9 mm Fan Speed 550/1800 RPM Bearing Type Fluid Dynamic Bearing Air Flow 31 CFM Interfaces Connector 4-pin Electrical Voltage 5 to 12 V Physical Form Factor Case Fan

Dimensions 9.2 cm (W) x 9.2 cm (D) x 2.5 cm (H)
- Weight 0.82kg Warranty 6 years Warranty


...

Dedicated to operate 24 hours a day, 7 days per week, the F PWM CO series case fans cool your computer system quietly. The fan forwards the PWM signal from the CPU to the whole case ventilation system. Employing a Japanese dual ball bearing, the fan operates with reduced friction & hence its lifespan is substantially extended. The series offers you with superb performance while maintaining your computer systems under optimal temperature at all times. Continuous Operation "CO" stands for Continuous Operation & makes the case fans suitable for PCs with non-stop operation like servers. This feature is brought by the Japanese dual ball bearing used in the fans, which reduces rotational friction, meaning it is less sensitive to dust & high temperature & hence is up to 5 times more durable than generic or modified bearings. Constantly Silent Thanks to the dual ball bearing & the patented fan holder design, the F PWM CO series is not only quiet, but also long-lasting. Quick & Easy Setup Via a single PWM signal, the CPU fan is controlled by the mainboard to maintain the ideal temperature of the CPU. The patented PST (PWM Sharing Technology) forwards the PWM signal to all other fans within the system so that all fans are spinning at the same speed. Such mechanism ensures silent operation when it is idle, but also gives sufficient performance when the demand comes. ...

The ARCTIC F PWM forward the PWM signal from the CPU to the whole case ventilation system. The entire system is cooled quietly, but still offers the superb performance when needed. Versatile Applicable With the standard 25mm frame, the ARCTIC F PWM can be applied as intake or outtake system fan. Silent Operation Thanks to fluid dynamic bearing & the patented fan holder design, the ARCTIC F PWM is not only quiet, but also highly durable. Quick & Easy Setup Via the PWM signal, the CPU fan is controlled by the mainboard to reach the ideal temperature for the CPU. The patented PST (PWM Sharing Technology) is forwarding the PWM signal to all other fans inside the system. This way, all fans are spinning at the same speed. This provides silent operation in idle mode, but also gives sufficient performance, when required to offer efficient cooling. ...

No Setup Needed
- It Simply Works The ARCTIC F TC controls its speed by itself. Thanks to the temperature sensor, all you need
...

Decisively enhanced The successor of the Freezer 11 series convinces all along the line with regards to noise level, cooling capacity, mounting versatility & transport-proofness. As semi passive cooler, the Freezer 12 also works extremely efficiently as the fan only starts up at a PWM signal with 40 % pulse width. The contact surface of the Freezer 12 direct-touch heatpipes does not cover the full protection cap of the CPU, but, more importantly, covers the whole processor DIE of the various compatible CPU. This leads to ideal cooling performance. Semi Passive Cooling With semi passive operation the Freezer 12 provides again a special feature. A sophisticated fan controller that was developed by German engineers allows passive cooling of the CPU during simple applications such as surfing & creating documents. The 92 mm fan only starts up at a PWM signal with 40 % pulse width. This saves energy, extends the service life & makes the cooler at low load completely silent. Innovative Ventilation Fluidic analysis & long testing hours allowed us to push the fan efficiency boundary further. This is leading to greater airflow & cooling at lower noise level, which not only crushes the stock cooler performance but also leaves our Freezer 7 Pro far behind. Optimal Compatibility Fast & easy to install & extremely reliable, the mounting system is compatible with Intel & AMD sockets. Easy Installation & Safe Transportation Thanks to different mounting models for various sockets & a backplate, the Freezer 12 is not only fool-proof to install, but also absolutely transport safe. Versatile Installation Extremely versatile to fulfil your preference on the airflow pattern within the PC case, you can mount the Freezer 12 in any way you want to get the exact airflow you need. ...

Price-Performance Champ The Freezer 33 TR is an updated version of our award-winning Freezer 33 & specially designed for the new AMD Ryzen Threadripper CPU. The base of the heatsink has been enlarged to fit the massive AMD Socket TR4 &, equipped with a Bioni X F120 fan, it pushes the cooling performance further to cope with the 180 W TDP of the AMD Ryzen. The Freezer 33 TR is the perfect CPU cooling solution for enthusiasts who want to build High-End Desktop Computer on a budget. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 TR heatpipes does not cover the full protection cap, but, more importantly, are right where the processor DIE is & cover even the largest versions (16 core) completely. This leads to maximum performance. Wide Range of Regulation With the range of 200 to 1800 RPM the Bioni X F120 fan of the Freezer 33 TR is controllable with the Patented PWM Sharing Technology to regulate the fan speed as needed. Extended Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. enhanced Heat Dissipation The Freezer 33 TR has off-centered heat pipes that dispense the heat in a more efficient way than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Enlarged base for AMD Threadripper The Freezer 33 TR is specifically designed for the new AMD Ryzen Threadripper s TR4 Processor & delivers extremely quiet cooling for High-End Desktop Computers. Enhanced Bearing Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced & a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise & you can enjoy a longer service life of your cooler. Easy Installation & Safe Transportation Thanks to different mounting models for various sockets, a backplate & a significantly lower weight compared to the i 30, the Freezer 33 TR is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 80 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

Additional Fan for More Cooling Capacity Two low noise 120 mm fans mounted on opposite sides of the heatpipe provide a great airflow. The first fan pushes air through the heatsink, the second fan pulls the air out of the heatsink. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports Edition heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Optimised Fan Design We further optimised the fan blade design to get a higher airflow at lower noise generation. With the range of 200 to 1 800 RPM the fans of the Freezer 33 e Sports Edition are controllable with the Patented PWM Sharing Technology to regulate the fan speed as needed. Extended Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. enhanced Heat Dissipation The Freezer 33 e Sports Edition has off-centered heat pipes that disperse the heat in a more efficient than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports Edition is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 103 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

Additional Fan for More Cooling Capacity Two low noise 120 mm fans mounted on opposite sides of the heatpipe provide a great airflow. The first fan pushes air through the heatsink, the second fan pulls the air out of the heatsink. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports Edition heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Optimised Fan Design We further optimised the fan blade design to get a higher airflow at lower noise generation. With the range of 200 to 1 800 RPM the fans of the Freezer 33 e Sports Edition are controllable with the Patented PWM Sharing Technology to regulate the fan speed as needed. Extended Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. enhanced Heat Dissipation The Freezer 33 e Sports Edition has off-centered heat pipes that disperse the heat in a more efficient than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports Edition is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 103 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

High Performance CPU Cooler The Freezer 33 e Sports ONE is a powerful Tower CPU cooler equipped with our new Bioni X Fan. Thanks to a newly developed thermal coating & our new Bioni X F120 fan the cooler gives you top notch performance for CPUs with a TDP up to 200 W. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports ONE heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Wide Range of Regulation With the range of 200 to 1800 RPM the fan of the Freezer 33 e Sports ONE & other fans are controllable in one setting thanks for ARCTICs PST (PWM Sharing Technology) to keep the overall noise level minimal yet the cooling performance as needed. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. 4x Longer Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports ONE is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 88 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

High Performance CPU Cooler The Freezer 33 e Sports ONE is a powerful Tower CPU cooler equipped with our new Bioni X Fan. Thanks to a newly developed thermal coating & our new Bioni X F120 fan the cooler gives you top notch performance for CPUs with a TDP up to 200 W. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports ONE heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Wide Range of Regulation With the range of 200 to 1800 RPM the fan of the Freezer 33 e Sports ONE & other fans are controllable in one setting thanks for ARCTICs PST (PWM Sharing Technology) to keep the overall noise level minimal yet the cooling performance as needed. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. 4x Longer Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports ONE is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 88 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...