The compact-sized Freezer 11 LP brings low noise cooling into low profile & HTPC Systems. With a height of 53 mm only, the cooler squeezes into even the tiniest PC cases. Compact & Lightweight With

Dimensions of 115 (L) x 106 (W) x 53 (H) mm, having a weight of only 255 g, the Freezer 11 LP is extremely compact. It fits virtually into any low profile PC case & is the ideal choice for any HTPC system. Reliable Cooling Performance Equipped with an ultra-quiet 92 mm PWM fan & two copper heatpipes, the Freezer 11 LP offers a maximum cooling capacity of 100 Watts. The dual high performance 6 mm heatpipes efficiently dissipate the heat from the CPU into the block consisting of 50 aluminum fins. Heatpipe
- ˜ 6 mm x 2 Heatsink Material
- Aluminum fins x 50, thickness: 0.3 mm Fan (mm)
- 92 Bearing
- Fluid Dynamic Bearing Noise Level
- 0.3 Sone Current, Voltage
- 0.13A, 3.8
- 12V Rated Fan Speed
- 900
- 2, 000 RPM, (PWM) Gross Weight
- 0.4kg











...

The Freezer 13 CO delivers superior cooling performance with utmost durability. Employing a Japanese dual ball bearing, the fan operates with reduced friction & hence its lifespan is substantially extended. Freezer 13 CO is your ultimate cooler to maintain your computer systems under optimal temperature at all times. ...

The Freezer 13 carries the legacy of the renowned Freezer 7 Pro Rev.2. With all together 8 high-performance heatpipes the cooler brings 200 Watts cooling performance – enough to cool down every current CPU. While doing so it is extremely silent. Superior Cooling Capacity With detailed engineering design, the Freezer 13 comprises of four U-shaped high performance heatpipes & 45 efficiently formed aluminum fins. The maximum cooling capacity for this cooler is 200W & is able to dissipate massive heat that is produced in high-end CPUS, such as Intel Core i 7. Ultra Quiet Operated with a 92mm PWM fan, the entire running operation remains whisper quiet, even at full load. The fan speed normally runs from 600 to 2000 RPM, which is sufficient to maintain your CPU at ideal temperature. Multi Compatibility The Freezer 13 features wide compatibility with AMD & Intel sockets. Its simple mounting system is designed to fit all current CPU platforms which makes this cooler to have a broad usability & brings overclocking to a new level Easy Installation The unique mounting system via push pins offers excellent stability & is applicable within seconds. The pre-applied ARCTIC MX-4 thermal compound makes the installation a quick & clean process. Compatible Sockets Intel Socket 1366, 1156, 1155, 775 AMD Socket FM2+, FM2, FM1, AM3+. AM3, AM2+, AM2, 939, 754 Specifications Fan (mm)
- 92 Noise Level (Sone)
- 0.5 Cooling Capacity (Watts)
- 200 Rated Fan Speed
- 600
- 2000 RPM, (PWM Controlled) Airflow
- 36, 4 CFM / 61.8 m&sup 3;/h





...

A member for the flagship CPU cooler series for mainstream motherboards, the Freezer 13 limited edition is characterized by ...

The Freezer 13 PRO CO delivers superior cooling performance with utmost durability. Employing a Japanese dual ball bearing, the fan operates with reduced friction & hence its lifespan is substantially extended. The Freezer 13 PRO CO is the essential for demanding users & enthusiasts. ...

Most small chassis users find it difficult to buy a suitable cooler replacement that fits the size of their PC case. Freezer 7 LP, a cutting edge Intel CPU cooler especially designed for media centre users to fulfill their needs. Main

Features: Dual Heatpipes Design Optimized Heatsink Design for Low Profile Intel Systems 80 mm PWM Fan Patented Fan Holder eliminates the Humming Noise Pre-applied High Performance Thermal Compound Easy Installation via Push Pins Light Weight, Transport Save Slim Beauty The revolutionary heatsink design of the Freezer 7 LP reduces the size of the cooler dramatically, leaving it o­nly 40mm slim (to the air intake level) & 263g light, almost half the weight of usual CPU coolers. With this ultra thin dimension, the Freezer 7 LP easily fits into any small chassis with limited space. Freeze & Breeze Apart from its lightweight & low profile design, the Freezer 7 LP also performs excellent cooling execution. Two heatpipes, 40 fins & an 80mm PWM fan dissipate heat from the CPU core efficiently & rapidly. Together with the highly thermal conductive pre-applied MX-2 thermal paste & voltage regulator cooling, the Freezer 7 LP is 20% cooler (thermal resistance) than the generic E8500 low profile cooler, giving media centre users an unexpected cooling experience. The Art of Silence Like other ARCTIC COOLING products, low noise impellers & patented fan holder are used to minimize the noise level. Even though spinning at full load, the Freezer 7 LP generates o­nly 0.5 Sone of noise – 71% quieter than the Intel low profile cooler. Dimension
- 109 L x 108 W x 42 H (to air intake level) / 53 H (with fan holder) mm Weight
- 263g Fan
- 80 mm x 1 Fan Speed
- 600 &711;V 2000 RPM (controlled by PWM) Air Flow
- 28 CFM / 47.6 m 3/h Maximum Cooling Capacity
- 90 Watt







...

Compatible with Intel Core i 7 & Core i 5, as well as AMD sockets Excellent cooling performance
- 130 Watts Ultra quiet 92mm PWM
...

Arctic Cooling Freezer A11 Cpu Cooler enhanced where it counts Based on the Freezer 7 Pro, the Freezer A11 has been enhanced airflow, cooling performance, noise level & transport-proofness. Whether you are an expert at installing electronics or this is your first time; the Freezer i 11 is just a few minutes away from being installed. Airflow Reinvented Fluidic analysis & long testing hours allowed us to push the fan efficiency boundary further. This is leading to greater airflow & cooling at lower noise level; which not only mutilates the stock cooler performance but also leaves our Freezer 7 Pro far behind Virtually Silent PWM control & efficient cooling allow a very low fan speed & thus a silent cooler without the worry of an overheating CPU. Rubber spacers between fan & heatsink eliminate any rattle or vibration sound. Multi-directional mounting Extremely versatile to fulfil your preference on the airflow pattern within the PC case, you can mount the Freezer A11 in any way you want to get the exact airflow you need. Compatibility AMD Socket: FM2, FM1, AM3+, AM3, AM2+, AM2 Max. Cooling Capacity: 150 Watts Recommended for TDP up to: 130 Watts Heatsink Direct Touch heatpipe & Oslash; 6 mm x 3 (double-sided) Aluminum fins x 45 (Thickness: 0.4 mm) Fan Diameter 92 mm Fan Speed: 500
- 2, 000 RPM (Controlled by PWM) Airflow: 74 CFM / 125.7 m&sup 3;/h Noise Level: 0.3 Sone Current / Voltage: 0.16 A / +12V DC Warranty 6 Years Limited Warranty
...

Based on the Freezer 7 Pro, the Freezer i 11 has been enhanced airflow, cooling performance, noise level & transport-proofness. Whether you are an expert at installing electronics or this is your first time; the Freezer i 11 is just a few minutes away from being installed. Airflow Reinvented Fluidic analysis & long testing hours allowed us to push the fan efficiency boundary further. This is leading to greater airflow & cooling at lower noise level; which not only mutilates the stock cooler performance but also leaves our Freezer 7 Pro far behind. Virtually Silent PWM control & efficient cooling allow a very low fan speed & thus a silent cooler without the worry of an overheating CPU. Rubber spacers between fan & heatsink eliminate any rattle or vibration sound. Multi-directional mounting Extremely versatile to fulfil your preference on the airflow pattern within the PC case, you can mount the Freezer i 11 in any way you want to get the exact airflow you need. Compatibility Intel Socket: 1150, 1155, 1156, 2011, 2011-3 Max. Cooling Capacity: 150 Watts Heatsink Direct Touch heatpipe & Oslash; 6 mm x 3 (double-sided) Aluminum fins x 45 (Thickness: 0.4 mm) Fan: Diameter 92 mm Fan Speed: 500
- 2, 000 RPM (Controlled by PWM) Airflow: 74 CFM / 125.7 m&sup 3;/h Noise Level: 0.3 Sone Current / Voltage: 0.16 A / +12V DC
...

The Freezer i 30 is an enthusiast-grade CPU cooler for the latest Intel socket 2011, as well as socket 1155 & 1156. Patented technologies, direct touch heatpipes, precision machining, a fan vibration absorption & a brand new mounting system offers you plenty of overclocking headroom at a minimal noise level. Direct Touch Heatpipe Heatsink The Freezer i 30 heatsink consists of 4 double-sided direct touch heatpipes, 8mm in diameter. A patented process (20 2011 000 71.8) allows us to pack the heatpipes without gaps & thus increase the contact surface & achieve better flatness by precision machining “ both leading to an enhanced heat transfer. Efficient Heat Dissipation As a combined result of the 4 direct touch heatpipes, 48 Aluminum fins, an interchangeable 120 mm PWM Fan (ARCTIC F12 PWM), & the famous ARCTIC MX-4 thermal compound (included), the Freezer i 30 offers superior cooling performance with a maximum cooling capacity of 320 Watts & lots of headroom for overclocking. Max. Cooling Capacity
- 320 Watts Heatpipe
- Direct-Touch ˜ 8 mm x 4 (double-sided) Heatsink Material
- Aluminum fins x 48, thickness: 0.5 mm Fan (mm)
- ARCTIC F12 PWM: 120 mm, 400 “ 1, 350 RPM (PWM controlled) Airflow
- 74 CFM / 125.7 m&sup 3;/h Bearing
- Fluid Dynamic Bearing Noise Level
- 0.3 Sone (@1, 350 RPM) Current, Voltage
- 0.22A / 3.5
- 12V

Dimensions (Product)
- 100 (L) x 139 (W) x 161 (H) mm Net Weight
- 0.9kg












...