The ARCTIC F Pro TC incorporates all features that are needed to create a silent fan. The combination of vibration absorption along with smart temperature control, create a silent & self-regulating fan fit for any of your cooling needs. No Setup Needed
- It Simply Works The ARCTIC F Pro TC controls its speed by itself. Thanks to the temperature sensor, simply install the fan & no further adjustments or setup is required. The fan controller is set to keep the temperature between 32°C & 38°C. When the temperature is below 32°C, the fan spins slowly & silently. If the temperature continues to rise, the fan speed will increase to deliver maximum airflow, & in turn cooling the PC more efficiently. Inaudible Operation The ARCTIC F Pro TC is fully optimized for low noise operation. The combination of temperature control with silent impeller & the patented fan holder makes the ARCTIC F Pro TC the perfect fan for anyone that enjoys silence. Optimal Flexibility The temperature sensor of the fan is installed on a 40cm cable. This gives you great flexibility to install the sensor in a spot that emits heat the most. Ideally the sensor is installed at the top of the PC case, since the temperature is highest at this point.
...

Arctic F9 Pwm 90mm Case Fan Long Service Life The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life Perfect Case Fan Regulation with PWM The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling & minimizes the noise level. Innovative Design Enables Quiet & Efficient Ventilation The innovative design of the fan blades improves the air flow & facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow & pressure. Two Way installation Blow warm air out of the case Draw cool air into your case Product Specifications Attributes Fan Diameter 9 mm Fan Speed 550/1800 RPM Bearing Type Fluid Dynamic Bearing Air Flow 31 CFM Interfaces Connector 4-pin Electrical Voltage 5 to 12 V Physical Form Factor Case Fan

Dimensions 9.2 cm (W) x 9.2 cm (D) x 2.5 cm (H)
- Weight 0.82kg Warranty 6 years Warranty


...

Dedicated to operate 24 hours a day, 7 days per week, the F PWM CO series case fans cool your computer system quietly. The fan forwards the PWM signal from the CPU to the whole case ventilation system. Employing a Japanese dual ball bearing, the fan operates with reduced friction & hence its lifespan is substantially extended. The series offers you with superb performance while maintaining your computer systems under optimal temperature at all times. Continuous Operation "CO" stands for Continuous Operation & makes the case fans suitable for PCs with non-stop operation like servers. This feature is brought by the Japanese dual ball bearing used in the fans, which reduces rotational friction, meaning it is less sensitive to dust & high temperature & hence is up to 5 times more durable than generic or modified bearings. Constantly Silent Thanks to the dual ball bearing & the patented fan holder design, the F PWM CO series is not only quiet, but also long-lasting. Quick & Easy Setup Via a single PWM signal, the CPU fan is controlled by the mainboard to maintain the ideal temperature of the CPU. The patented PST (PWM Sharing Technology) forwards the PWM signal to all other fans within the system so that all fans are spinning at the same speed. Such mechanism ensures silent operation when it is idle, but also gives sufficient performance when the demand comes. ...

The ARCTIC F PWM forward the PWM signal from the CPU to the whole case ventilation system. The entire system is cooled quietly, but still offers the superb performance when needed. Versatile Applicable With the standard 25mm frame, the ARCTIC F PWM can be applied as intake or outtake system fan. Silent Operation Thanks to fluid dynamic bearing & the patented fan holder design, the ARCTIC F PWM is not only quiet, but also highly durable. Quick & Easy Setup Via the PWM signal, the CPU fan is controlled by the mainboard to reach the ideal temperature for the CPU. The patented PST (PWM Sharing Technology) is forwarding the PWM signal to all other fans inside the system. This way, all fans are spinning at the same speed. This provides silent operation in idle mode, but also gives sufficient performance, when required to offer efficient cooling. ...

No Setup Needed
- It Simply Works The ARCTIC F TC controls its speed by itself. Thanks to the temperature sensor, all you need
...

The Freezer 13 carries the legacy of the renowned Freezer 7 Pro Rev. With all together 8 high-performance heatpipes the cooler brings 200 Watts cooling performance
- enough to cool down every current CPU. While doing so it is extremely silent.

Features: Ultra Quiet
- Operated with a 92mm PWM fan the entire running operation remains whisper quiet even at full load. The fan speed normally runs from 600 to 2000 RPM which is sufficient to maintain your CPU at ideal temperature. Easy Installation
- The unique mounting system via push pins offers excellent stability & is applicable within seconds. The pre-applied ARCTIC MX-4 thermal compound makes the installation a quick & clean process. Superior Cooling Capacity
- With detailed engineering design the Freezer 13 comprises of four U-shaped high performance heatpipes & 45 efficiently formed aluminum fins. The maximum cooling capacity for this cooler is 200W & is able to dissipate massive heat that is produced in high-end CPUS such as Intel Core i 7 Multi. Compatibility
- The Freezer 13 features wide compatibility with AMD & Intel sockets. Its simple mounting system is designed to fit all current CPU platforms which makes this cooler to have a broad usability & brings overclocking to a new level.






...

Price-Performance Champ The Freezer 33 TR is an updated version of our award-winning Freezer 33 & specially designed for the new AMD Ryzen Threadripper CPU. The base of the heatsink has been enlarged to fit the massive AMD Socket TR4 &, equipped with a Bioni X F120 fan, it pushes the cooling performance further to cope with the 180 W TDP of the AMD Ryzen. The Freezer 33 TR is the perfect CPU cooling solution for enthusiasts who want to build High-End Desktop Computer on a budget. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 TR heatpipes does not cover the full protection cap, but, more importantly, are right where the processor DIE is & cover even the largest versions (16 core) completely. This leads to maximum performance. Wide Range of Regulation With the range of 200 to 1800 RPM the Bioni X F120 fan of the Freezer 33 TR is controllable with the Patented PWM Sharing Technology to regulate the fan speed as needed. Extended Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. enhanced Heat Dissipation The Freezer 33 TR has off-centered heat pipes that dispense the heat in a more efficient way than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Enlarged base for AMD Threadripper The Freezer 33 TR is specifically designed for the new AMD Ryzen Threadripper s TR4 Processor & delivers extremely quiet cooling for High-End Desktop Computers. Enhanced Bearing Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced & a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise & you can enjoy a longer service life of your cooler. Easy Installation & Safe Transportation Thanks to different mounting models for various sockets, a backplate & a significantly lower weight compared to the i 30, the Freezer 33 TR is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 80 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

Additional Fan for More Cooling Capacity Two low noise 120 mm fans mounted on opposite sides of the heatpipe provide a great airflow. The first fan pushes air through the heatsink, the second fan pulls the air out of the heatsink. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports Edition heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Optimised Fan Design We further optimised the fan blade design to get a higher airflow at lower noise generation. With the range of 200 to 1 800 RPM the fans of the Freezer 33 e Sports Edition are controllable with the Patented PWM Sharing Technology to regulate the fan speed as needed. Extended Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. enhanced Heat Dissipation The Freezer 33 e Sports Edition has off-centered heat pipes that disperse the heat in a more efficient than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports Edition is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 103 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

Additional Fan for More Cooling Capacity Two low noise 120 mm fans mounted on opposite sides of the heatpipe provide a great airflow. The first fan pushes air through the heatsink, the second fan pulls the air out of the heatsink. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports Edition heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Optimised Fan Design We further optimised the fan blade design to get a higher airflow at lower noise generation. With the range of 200 to 1 800 RPM the fans of the Freezer 33 e Sports Edition are controllable with the Patented PWM Sharing Technology to regulate the fan speed as needed. Extended Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. enhanced Heat Dissipation The Freezer 33 e Sports Edition has off-centered heat pipes that disperse the heat in a more efficient than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports Edition is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 103 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

High Performance CPU Cooler The Freezer 33 e Sports ONE is a powerful Tower CPU cooler equipped with our new Bioni X Fan. Thanks to a newly developed thermal coating & our new Bioni X F120 fan the cooler gives you top notch performance for CPUs with a TDP up to 200 W. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports ONE heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Wide Range of Regulation With the range of 200 to 1800 RPM the fan of the Freezer 33 e Sports ONE & other fans are controllable in one setting thanks for ARCTICs PST (PWM Sharing Technology) to keep the overall noise level minimal yet the cooling performance as needed. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. 4x Longer Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports ONE is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 88 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...