Allied Telesis Centre COM GS980M GS980MX/52PSM 48 Ports Manageable Layer 3 Switch
- Gigabit Ethernet, 5 Gigabit Ethernet, 10
...

Allied Telesis Centre COM GS980MX GS980MX/28PSM 24 Ports Manageable Layer 3 Switch
- 5 Gigabit Ethernet, 10 Gigabit Ethernet,
...

The AT-CV5001 shares common line cards with other Converteon chassis for easier inventory management & smoother product deployment. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis Centre COM FS710/24 24 Ports Ethernet Switch
- 2 Layer Supported
- Twisted Pair
- Desktop, Rack-mountable,


...

The Allied Telesis FS710 Series is the economical & eco-friendly solution for today’s networks, providing an extensive range of cost-effective options. The FS710 Series switches providesilent operation, with easy set-upand simple connectivity for desktop & small to medium network environments. High performance Full auto-negotiating 10/100 ports allow FS710 switches to detect the speed & duplex modes of attached devices, & automatically configure for the best possible performance. Quality & reliability Allied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250, 000 unmanaged switches every year, Allied Telesis offers proven reliability, & industry-recognized quality. ...

The FS980M/28DP features 24 x 10/100TX Po E+ ports, 4 x 100/1000X SFP uplink/stacking ports dual fixed PSU for power supply redundancy & 375W power budget. Centre COM FS980M/28DP switch is cost-effective, fully managed, & can be stacked for increased resiliency & port density at the edge of the network. As part of an Autonomous Management Framework™ (AMF) network, the FS980M/28DP switch utilise automated management & zero-touch recovery to lower running costs. Power over Ethernet delivers the full 30 watts of Po E+ to support video surveillance & wireless access applications with a power budget of 375W. Two fixed PSU provide both system & Po E redundancy. A single PSU is able to support the whole Po E+ budget.
- Ethernet Protection Switched Ring (EPSRing) allows several FS980M switches to join a protected ring, capable of recovery within as little as 50ms. This feature is perfect for high availability in enterprise networks
- The FS980M Series provides static IPv 4 routing at the edge of the network, as well as support for RIPv 1 & RIPv 2
- Create a VCStack of up to four units with 2 Gbps of stacking bandwidth per each unit. VCStack provides a highly-available system in which network resources are spread out across stacked units, minimizing the impact should any unit fail
- Po E+ provides centralized power connection to media, cameras, IP phones & wireless access points
- Po E+ reduces costs & offers greater flexibility with the capability to connect devices requiring more power (up to 30W), such as pan-tilt-zoom security cameras
- Po E power redundancy is available with a dual power supply model, to ensure critical powered devices remain online
- The FS980M/28DP has dual power supplies to further increase reliability
- The edge is the most vulnerable point of the network—the FS980M Series protects you with a full set of security features including Multi Supplicant Authentication, IEEE 802.1x, RADIUS, TACACS+, & Dynamic VLAN
- Guest VLAN ensures visitors or unauthorized users can only connect to user-defined services—for example, Internet only
- Access Control Lists (ACLs) enable inspection of incoming frames & classify them based on various criteria. Specific actions are applied to effectively manage the network traffic. Typically, ACLs are used as a security mechanism, either permitting or denying entry









...

The AT-GS900 Series switches require minimal configuration & can be installed in minutes for use in network racks or on desktops. The 10/100/1000TX copper ports on the AT-GS900 Series are fully auto-negotiating, allowing the switches to connect to all other 10 Mbps Ethernet, 100 Mbps Fast Ethernet, or 1000 Mbps Gigabit Ethernet devices. Equipped with MDI/MDIX ports for easy connection to other hubs & switches, the ATGS900 Series offers a natural migration path from legacy networks & a cost-effective introduction to Gigabit Ethernet. Finally, easy to read front panel LEDs show ongoing switch status & simplify troubleshooting. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The AT-GS900 series of unmanaged Gigabit Layer 2+ switches offer seamless & simple connectivity to your existing network infrastructure. Wall, desk, & rack-mounting options give you the flexibility to chose a model that meets your deployment needs. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis GS950 V2 GS950/28PS V2 24 Ports Manageable Ethernet Switch
- Gigabit Ethernet
- 10/100/1000 Base-T, 100/1000

...

Allied Telesis Web Smart AT-GS950/28PS-50 24 Ports Manageable Ethernet Switch
- 2 Layer Supported
- Modular
- Twisted Pair,


...