The Allied Telesis FS710 Series is the economical & eco-friendly solution for today’s networks, providing an extensive range of cost-effective options. The FS710 Series switches providesilent operation, with easy set-upand simple connectivity for desktop & small to medium network environments. High performance Full auto-negotiating 10/100 ports allow FS710 switches to detect the speed & duplex modes of attached devices, & automatically configure for the best possible performance. Quality & reliability Allied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250, 000 unmanaged switches every year, Allied Telesis offers proven reliability, & industry-recognized quality. ...

The Allied Telesis FS710 Series is the economical & eco-friendly solution for today’s networks, providing an extensive range of cost-effective options. The FS710 Series switches providesilent operation, with easy set-upand simple connectivity for desktop & small to medium network environments. High performance Full auto-negotiating 10/100 ports allow FS710 switches to detect the speed & duplex modes of attached devices, & automatically configure for the best possible performance. Quality & reliability Allied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250, 000 unmanaged switches every year, Allied Telesis offers proven reliability, & industry-recognized quality. ...

The FS980M/28DP features 24 x 10/100TX Po E+ ports, 4 x 100/1000X SFP uplink/stacking ports dual fixed PSU for power supply redundancy & 375W power budget. Centre COM FS980M/28DP switch is cost-effective, fully managed, & can be stacked for increased resiliency & port density at the edge of the network. As part of an Autonomous Management Framework™ (AMF) network, the FS980M/28DP switch utilise automated management & zero-touch recovery to lower running costs. Power over Ethernet delivers the full 30 watts of Po E+ to support video surveillance & wireless access applications with a power budget of 375W. Two fixed PSU provide both system & Po E redundancy. A single PSU is able to support the whole Po E+ budget.
- Ethernet Protection Switched Ring (EPSRing) allows several FS980M switches to join a protected ring, capable of recovery within as little as 50ms. This feature is perfect for high availability in enterprise networks
- The FS980M Series provides static IPv 4 routing at the edge of the network, as well as support for RIPv 1 & RIPv 2
- Create a VCStack of up to four units with 2 Gbps of stacking bandwidth per each unit. VCStack provides a highly-available system in which network resources are spread out across stacked units, minimizing the impact should any unit fail
- Po E+ provides centralized power connection to media, cameras, IP phones & wireless access points
- Po E+ reduces costs & offers greater flexibility with the capability to connect devices requiring more power (up to 30W), such as pan-tilt-zoom security cameras
- Po E power redundancy is available with a dual power supply model, to ensure critical powered devices remain online
- The FS980M/28DP has dual power supplies to further increase reliability
- The edge is the most vulnerable point of the network—the FS980M Series protects you with a full set of security features including Multi Supplicant Authentication, IEEE 802.1x, RADIUS, TACACS+, & Dynamic VLAN
- Guest VLAN ensures visitors or unauthorized users can only connect to user-defined services—for example, Internet only
- Access Control Lists (ACLs) enable inspection of incoming frames & classify them based on various criteria. Specific actions are applied to effectively manage the network traffic. Typically, ACLs are used as a security mechanism, either permitting or denying entry









...

The AT-GS900 Series switches require minimal configuration & can be installed in minutes for use in network racks or on desktops. The 10/100/1000TX copper ports on the AT-GS900 Series are fully auto-negotiating, allowing the switches to connect to all other 10 Mbps Ethernet, 100 Mbps Fast Ethernet, or 1000 Mbps Gigabit Ethernet devices. Equipped with MDI/MDIX ports for easy connection to other hubs & switches, the ATGS900 Series offers a natural migration path from legacy networks & a cost-effective introduction to Gigabit Ethernet. Finally, easy to read front panel LEDs show ongoing switch status & simplify troubleshooting. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The AT-GS900 series of unmanaged Gigabit Layer 2+ switches offer seamless & simple connectivity to your existing network infrastructure. Wall, desk, & rack-mounting options give you the flexibility to chose a model that meets your deployment needs. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis Web Smart AT-GS950/28PS-50 24 Ports Manageable Ethernet Switch
- 2 Layer Supported
- Modular
- Twisted Pair,


...

Allied Telesis Centre COM GS970M/28 24 Ports Manageable Layer 3 Switch
- 3 Layer Supported
- Modular
- Optical Fiber, Twisted


...

Allied Telesis Centre COM GS970M/28PS 24 Ports Manageable Layer 3 Switch
- 3 Layer Supported
- Modular
- Optical Fiber,


...

The Allied Telesis Centre COM GS980M Series of Layer 3 Gigabit switches enable a cost-effective & fully managed network. A high-density, space saving solution, with Power over Ethernet (Po E+) to connect & power devices such as video surveillance cameras & IP phones, makes the GS980M Series ideal for applications at the network edge. Overview Allied Telesis GS980M Series switches provide an excellent access solution for today’s networks, supporting Gigabit to the desktop for maximum performance. Deploying the GS980M as an AMF edge node when an AMF Master switch is available in the network, helps reduce network running costs by automating & simplifying many day-to-day administration tasks. 48 Gigabit ports & 4 SFP uplinks enable high-density & secure connectivity at the network edge, & the Po E+ model can supply up to 30 Watts to powered end-points.
- Allied Ware Plus™ operating system
- Autonomous Management Framework™ (AMF) edge node
- Active Fiber Monitoring
- Ethernet Protection Switched Ring (EPSR™)
- Po E power budget of 740 Watts
- Continuous Power over Ethernet (Po E+)
- Static Routing & RIP
- DHCP snooping
- IEEE 802.1x/MAC/ Web authentication support
- Loop Protection
- Eco-friendly
- Web-based Graphical User Interface (GUI)











...

Founded with the goal of producing reliable, standards-based networking products, Allied Telesis bridges the gap left by other Ethernet networking manufacturers, whose solutions are limited in scope or cost-prohibitive. The AT-MCF2000AC module is an AC power supply unit for the AT-MCF2000 series of media converter chassis The power supply module has two LEDs
- PSU
- FAN

Specification Input Voltage 100-240 VAC 50/60 Hz Output Voltage 12 volts & 3.3 volts Operating Temperature: 0° C to 40° C
- (32° F to 104° F) Storage Temperature: -20° C to 70° C
- (-° 4F to 158° F) Operating Humidity: Less than 80% noncondensing Storage Humidity: Less than 95% noncondensing Maximum Operating Altitude: 3, 048 m (10, 000 ft) Maximum Nonoperating Altitude: 4, 000 m (13, 000 ft)





...