Tripp-Lite PDUMH15HVNET.

Colour: Black
- Tripp Lite Switched, Metered Rack Power Distribution Units enable


...

Tripp Lite's Smart Online SUINT1500RTXL2 Ua online, double conversion UPS protects critical server, networking & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Large capacity 1.5k VA/1200 watt UPS continuously converts incoming AC to DC, then back to perfect sine wave AC output at selectable 200/208/220/230/240V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency fluctuations & other hard-to-solve power problems not addressed by other UPS types. Pure sine wave output & zero transfer time to battery offers guaranteed compatibility with all equipment types. Highly efficient operation in optional Economy Mode setting, saving BTU heat output & energy costs.

Includes:: 6 IEC-320-C13 outlets arranged in two individually switchable load banks of three outlets each. Load banks can be controlled independently via software interface to selectively reboot remote equipment or shed less important loads to extend battery runtime for critical equipment. Battery backup runtime can be extended through the addition of external 2U & 3U rackmount battery packs (Part Number BP48V24-2U or BP48V60RT-3U). Network management interfaces support simultaneous communications via USB (Universal Serial Bus) port, DB9 serial port & SNMPWEBCARD slot. HID-compliant USB (Universal Serial Bus) interface enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data & utility power conditions via all 3 network interfaces simultaneously.

Includes:: Power Alert monitoring software & complete cabling. Emergency Power Off (EPO) interface. Compatible with Tripp Lite's Watch Dog software. 4-post rackmount accessories included; optional 2-9USTAND tower stand kit & 2POSTRMKITWM 2-post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries & external battery packs. Attractive all-black color scheme. 1500VA / 1.5k VA / 1200 watt on-line double-conversion 2U rack/tower UPS 200/208/220/230/240V 50/60 Hz output; High efficiency economy mode option Expandable runtime; Hot-swap batteries; 19 in / 48.3cm installed depth USB (Universal Serial Bus), RS232 & EPO ports; support for SNMP/WEB card options Front panel status LEDs with detailed load & battery metering 2 independently switchable output load banks C14 inlet; C13 outlets Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's SMX1500LCD Line-Interactive Digital UPS System offers voltage regulation, surge suppression & long-lasting battery support for personal computers, network workstations, home entertainment systems & media centers. Internal UPS circuits support entry-level PCs for up to 60 min. or individual VCR/DVR components for up to 3 hours during power failures. Prevents data loss, viewing interruptions, lost recordings & loss of component programming. Automatic Voltage Regulation (AVR) circuits regulate brownouts as low as 176V back to usable levels without consuming battery power. Offers complete power protection in an attractive black tower configuration. It

Includes:: 8 battery-supported AC outlets. USB (Universal Serial Bus) port enables optional unattended system shutdown without data loss in case of extended power failure; USB (Universal Serial Bus) cable included. HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X. Built-in single-line phone suppression protect modem, satellite receiver or other peripherals with a standard dialup/DSL phone connection or dataline connection. Set of 2.2 GHz coaxial jacks protect against surges entering on CATV, satellite or broadcast antenna connections. Built-in audible alarm & large LCD front panel voltage display indicate line power status, battery power status, battery low/replace status & voltage boost operation. 1500VA/900W power-handling ability supports entry-level PCs, home entertainment systems, network workstations, audio/video components & more. It offers 4.5 min. battery runtime with a full load of 1500VA/900W & 12 min. with a half load of 750VA/450W. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Tripp Lite's SMX1500SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Large internal batteries offer 20 min. half load runtime & 8 min. full load runtime. 1500VA/900W power handling capability & full-time sine wave output offer guaranteed compatibility with networking, telecom & other sensitive electronic applications.

Includes:: 8 UPS-protected C13 output receptacles. Supports simultaneous remote monitoring of UPS & site power conditions via built-in network accessory card slot, USB (Universal Serial Bus) & DB9 serial monitoring ports. HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications interfaces support messaging of UPS & line power status, plus output power control for delayed or immediate reboot of all connected devices at once.

Includes:: Power Alert UPS monitoring & unattended shutdown software with management support for an unlimited number of network UPS systems. Single-line tel/DSL & network Ethernet line surge suppression. Built-in audible alarm & 9 LEDs provide status notification for line power, battery power, battery charge level, load level, plus AVR boost & trim operational status information. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges. Attractive, all-black tower housing. Features 1500VA/900W power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom & other sensitive electronic devices Large internal batteries offer runtimes of 20 minutes at half load (750VA/450W) & 8 minutes at full load (1500VA/900W) Automatic voltage regulation (AVR) circuits maintain user-selectable 220V, 230V or 240V nominal output over an input voltage range of 174-266V (220V), 182-278V (230V) or 190-290V (240V) 8 C13 output receptacles IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles Power Alert UPS monitoring & unattended shutdown software included Offers simultaneous monitoring by up to 3 directly connected devices through included USB (Universal Serial Bus), DB9 & SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included Power Alert monitoring software Communications ports support messaging of UPS & line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage & remaining battery capacity HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X Supports Tripp Lite's Watch Dog software (requires optional WATCHDOGSW) 9 LEDs provide continuous status information of UPS operating parameters & site power quality Hot-swappable batteries allow on-site battery replacement without powering off connected equipment Optional PDUBHV10 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment Single-line tel/DSL & network Ethernet line surge suppression CE/IEC 62040, GOST, SASO, Ro HS-compliant, Class A Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's PDUMV20HVNET Switched, Metered Rack Power Distribution Unit provides a variety of advanced network control & monitoring functions. It gives IT managers the ability to remotely monitor PDU power consumption & in-rack environmental conditions, & to turn on, turn off, recycle or lock out power to each individual receptacle. Switched PDU systems can be accessed, configured & controlled through secure Web, SNMP or Telnet interfaces. Individually switched outlets can be controlled via a built-in Web/network interface, enabling remote reboots of unresponsive network hardware. User-defined power-up & power-down outlet sequences ensure proper operation of interdependent IT systems & prevent inrush-related overloads as devices are powered on. Programmable load shedding of less critical devices at user-defined intervals extends UPS uptime in response to power failures. Unused PDU outlets can be electronically locked off to prevent powering of unauthorized hardware. PDU power consumption is displayed locally & can be monitored via the Web/network interface, with user-defined alarms to warn of potential overloads before critical IT mains or branch breakers trip. An optional ENVIROSENSE temperature/humidity probe enables remote monitoring of in-rack environmental conditions & alarms for up to three user-supplied contact-closure sensors. It supports real-time monitoring, notification & logging of all on-board reporting functions with user-specified alarm thresholds & actions for each reported condition. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Tripp Lite's APSINT2012 DC-to-AC inverter with automatic line-to-battery transfer & integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 230V AC power from any 12V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment & the battery set is recharged via 3 stage, selectable 15/60 amp charging system. In UPS mode, the APS system responds to blackouts & voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output.

Includes:: a set of high current DC input terminals for simple installation (user supplies batteries & cabling
- see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging & UPS line power operation, plus efficient PWM sine wave AC output in inverter & UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors & other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching & continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications & site conditions with adjustable charger settings for wet/gel battery types & selectable line to battery power transfer voltages. 12V DC or 230V AC input; 230V, 50 Hz output (hardwired) 2000 watts continuous, 3000 watts Over Power & 4000 watts Double Boost inverter output (see specifications) 3 stage, selectable 15/60 amp wet/dry cell battery charger Auto Transfer Switching option for battery backup / UPS operation Reliability enhanced large-transformer design with protected DC & AC wiring terminals Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

This product is a 2200VA on-line, double-conversion UPS system for critical server, network & telecommunications equipment. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 130V & overvoltages to 275V. Network management interfaces support simultaneous communications via USB (Universal Serial Bus) port, DB9 serial port & SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data & utility power conditions via all 3 network interfaces. Integrated 2-bank PDU switching supports load shedding & remote-reboot of connected equipment. LED display panel easily rotates for better viewing in rackmount or tower configurations. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Tripp Lite's SMX2200XLRT2U intelligent, line-interactive rack/tower uninterruptible power supply prevents data loss, downtime & equipment damage due to power outages, voltage fluctuations & transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 17 min. half-load runtime & 6 min. at full load. Runtime is expandable with optional BP48V24-2U or BP48V60RT-3U external battery packs. Maintains regulated 230V nominal output without using battery power during brownouts & overvoltages from 158-290V. 2200VA/1600W power handling capability & full-time sine wave output offers guaranteed compatibility with networking, telecom & other sensitive electronic applications. 8 C13 outlets including 3 load banks (1 outlet each) that are individually switchable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. It supports simultaneous remote monitoring of UPS & site power conditions via built-in USB (Universal Serial Bus) & DB9 monitoring ports. HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X.

Includes:: Power Alert UPS monitoring & unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS & connected equipment in case of fire or emergency. Multi-function audible alarms & 5 front panel LEDs offer at-a-glance notification of UPS & line power status. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges & line noise. Attractive all-black color scheme. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Tripp Lite's SUINT3000RTXL3U UPS System offers complete power conditioning & battery support for critical fileservers & internetworking equipment in a versatile 3U rack/tower configuration. Offers compatibility with 200/208/220/230/240V applications at 50/60 Hz. Double conversion power conditioning process removes line noise, voltage fluctuations & frequency variations by converting incoming AC to DC, then back to universally compatible pure sine wave AC output. Standard internal batteries offer seamless support of connected equipment during power failures with zero transfer time. Support through extended power failures is available with the addition of 2U rack/tower compatible battery packs BP72V15-2U (limit 1), BP72V28RT-3U (multi-pack compatible) & BP72V18-2US (multi-pack compatible). Maintains continuous output over an input range of 160 to 275V without depleting battery reserves. True online, double-conversion power conditioning offers enhanced, network-grade pure sine wave AC power for critical fileservers, internetworking equipment & sensitive electronics Maintains output within 2% of selectable 200/208/220/230/240V at 50/60 Hz (+/-0.05 Hz) Neutralizes frequency variations, fast electrical impulses, harmonics & other hard-to-solve power problems not addressed by other UPS types Versatile rack/tower format requires only 3 rack spaces (3U) in rackmount applications; included tower stand set supports upright configuration ...

Tripp Lite's SMX3000XLRT2U is an intelligent, line interactive rack/tower uninterruptible power supply that prevents data loss, downtime & equipment damage due to power outages, voltage fluctuations & transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 13 minutes half load runtime & 4 minutes at full load. Runtime is expandable with optional BP48V24-2U or BP48V60RT-3U external battery packs. Maintains regulated 230V nominal output without using battery power during brownouts & overvoltages from 151 to 282V. 3000VA / 2250 watt power handling capability & full time sine wave output offers guaranteed compatibility with networking, telecom & other sensitive electronic applications.

Includes:: a total of 9 outlets arranged in 3 load banks that are individually switchable via software interface to reboot select equipment on demand or automatically shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS & site power conditions via built-in USB (Universal Serial Bus) & DB9 monitoring ports.

Includes:: Power Alert UPS monitoring & unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS & connected equipment in the case of fire or emergency. Multi-function audible alarms & set of 5 front panel LEDs offer at-a-glance notification of UPS & line power status. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges & line noise. Attractive all-black color scheme. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...