The SRW6U 6U Wall Mount Rack Enclosure Cabinet is designed to integrate wall-mounting, easy equipment access, & cable management in IT network applications with limited floor space. Ventilated front door & side panels allow generous airflow to keep equipment operating safely. Adjustable rack rails with square mounting holes accommodate up to 6U of standard 19" rackmount equipment. Supports up to 140 lbs of equipment. A sturdy wall-mount bracket allows the cabinet to quickly be hung on the wall. ...

Switched, Metered, 1U rack PDU supports 20A maximum capacity at 208/230/240V (agency de-rated to 16 amps).

Includes::

...

Tripp Lites premium UPS replacement battery cartridges breathe new life into UPS systems suffering from expired or weak internal batteries. Each replacement battery cartridge is carefully screened & certified to meet or exceed original specifications & ships ready for installation. Reusable packaging holds expired batteries for recycling center delivery. See Tripp Lites UPS replacement battery web page to confirm compatibility & quantity required.

Includes:: 18-month warranty. COMPATIBLE WITH TRIPP LITE MODELS SMART500RT1U, SMX500RT1U Key Features Restores UPS runtime performance to original specifications Comes pre-assembled & ready for installation Reusable packaging holds expired batteries for recycling center delivery

Includes:: 18-month warranty



...

1000VA online, double-conversion UPS system for critical server, network & telecommunications equipment. 2U rackmount form factor with an installed depth of only 13.5 in (34.3 cm). Expandable battery runtime with optional external battery packs: BP24V15RT2U, BP24V28-2U (maximum of 1 per UPS) or BP24V70-3U (multiple battery packs can be daisy-chained). Full-time sine wave 200, 208, 220, 230 or 240V +/-2% output. Uninterruptible Power Supply (UPS) continuously converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Corrects brownouts as low as 130V & overvoltages as high as 275V without draining battery power. IEC-320-C14 inlet input connection; IEC-320-C13 output receptacles. Network-grade AC surge & noise suppression. Zero transfer time between AC & battery operation. Highly efficient operation in optional Economy Mode setting, saving BTU heat output & energy costs. Network management interfaces support simultaneous communications via USB (Universal Serial Bus) port, DB9 serial port & SNMPWEBCARD slot. HID-compliant USB (Universal Serial Bus) interface enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data & utility power conditions via all 3 communications interfaces.

Includes:: Power Alert monitoring software & complete cabling. Emergency Power Off (EPO) interface. 3-stage metered current monitoring & battery charge status LEDs. LED display panel easily rotates for more convenient viewing in rackmount or tower configurations. Data-line surge suppression for dialup, DSL or Ethernet network connection. Utility power & voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto bypass mode. 4-post rackmount accessories included; optional 2-9USTAND tower stand kit & 2POSTRMKITWM 2-post rack & wall-mount accessories available. Field-replaceable, hot-swappable internal batteries & external battery packs. Attractive all-black color scheme. 2-year warranty; extended warranty & service contracts available. 1000VA / 1k VA / 800 watt on-line double-conversion 2U rack/tower UPS 200/208/220/230/240V 50/60 Hz output; High efficiency economy mode option Expandable runtime; Hot-swap batteries; 13.5 in / 34.3cm installed depth USB (Universal Serial Bus), RS232 & EPO ports; support for SNMP/WEB card options Front panel status LEDs with detailed load & battery metering C14 inlet; C13 outlets Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Tripp Lite Smart Pro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network & telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts & overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS & site-power data, plus enables a variety of UPS setup & configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 97% line-mode efficiency offers reduced heat emissions & operating costs. Network management interfaces support communications via USB (Universal Serial Bus), RS-232 & optional SNMPWEBCARD network interface. HID-compliant USB (Universal Serial Bus) interface enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data & utility power conditions.

Includes:: Power Alert monitoring software & complete cabling. Switched output load banks enable scheduled & real-time remote reboot & load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel & silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable batteries. Features Tripp Lite SMX1000RT2U line-interactive 2U rack/tower UPS with 1000VA / 1k VA capacity Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts & overvoltages from 182 to 278V C14 AC power inlet; 6 C13 output receptacles, Two independently switchable output load banks Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts & overvoltages High 97% efficiency rating in line-power mode offers reduced power consumption & BTU emissions Internal batteries offer 11.9 minutes at 50% load (450W) & 3.6 minutes at 100% load (900W) Hot-swappable, user-replaceable internal batteries can be replaced with no disruption to connected equipment Front panel LCD monitoring screen with MODE & ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS & site power information LCD interface also supports a number of advanced user setup & operating preferences Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement Built-in USB (Universal Serial Bus), RS-232 & optional SNMPWEBCARD accessory monitoring options HID-compliant USB (Universal Serial Bus) interface enables integration with built-in power management & auto shutdown features of Windows & Mac OS X Included Power Alert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Tripp Lite's SMX1050SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Large internal batteries offer 20 min. half load runtime & 7 min. full load runtime. 1050VA/650W power handling capability & full-time sine wave output offer guaranteed compatibility with networking, telecom & other sensitive electronic applications.

Includes:: 8 UPS-protected C13 output receptacles. Supports simultaneous remote monitoring of UPS & site power conditions via built-in network accessory card slot, USB (Universal Serial Bus) & DB9 serial monitoring ports. HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications interfaces support messaging of UPS & line power status, plus output power control for delayed or immediate reboot of all connected devices at once.

Includes:: Power Alert UPS monitoring & unattended shutdown software with management support for an unlimited number of network UPS systems. Single-line tel/DSL & network Ethernet line surge suppression. Built-in audible alarm & 9 LEDs offer status notification for line power, battery power, battery charge level, load level, plus AVR boost & trim operational status information. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's SMX1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage regulation, expandable battery runtime & intelligent monitoring with unattended shutdown capability. Tested to CE/IEC 60601-1 standard as medical electrical equipment. Built-in isolation transformer with Faraday shield offers full line isolation & removes common mode noise while maintaining full AC surge suppression in all modes.

Includes:: high quality hospital-grade plug & outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports computers, inter-networking equipment & other critical loads during commercial power failures. External battery connector allows configuration for up to several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible). Line interactive voltage regulation corrects brownouts as low as 155V & overvoltages as high as 274V back to normal 230V levels, saving battery reserves for use only during complete power failures.

Includes:: diagnostic LEDs & 2 built-in communications ports (1 USB (Universal Serial Bus), 1 DB9) that work with included Power Alert Software & cabling to provide automatic unattended shutdown of connected network & PC applications. 1000VA / 1k VA line interactive, extended run tower UPS Maintains 230V nominal output over an input range of 155 to 274V Professional features include serial port, IEC320 plug & outlets, built-in isolation transformer Input: IEC C14 inlet (230V 5A) / Output: 6 IEC C13 (230V) 2 year product warranty Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp-Lite PDUMH15HVNET.

Colour: Black
- Tripp Lite Switched, Metered Rack Power Distribution Units enable


...

Tripp Lite's Smart Online SUINT1500RTXL2 Ua online, double conversion UPS protects critical server, networking & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Large capacity 1.5k VA/1200 watt UPS continuously converts incoming AC to DC, then back to perfect sine wave AC output at selectable 200/208/220/230/240V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency fluctuations & other hard-to-solve power problems not addressed by other UPS types. Pure sine wave output & zero transfer time to battery offers guaranteed compatibility with all equipment types. Highly efficient operation in optional Economy Mode setting, saving BTU heat output & energy costs.

Includes:: 6 IEC-320-C13 outlets arranged in two individually switchable load banks of three outlets each. Load banks can be controlled independently via software interface to selectively reboot remote equipment or shed less important loads to extend battery runtime for critical equipment. Battery backup runtime can be extended through the addition of external 2U & 3U rackmount battery packs (Part Number BP48V24-2U or BP48V60RT-3U). Network management interfaces support simultaneous communications via USB (Universal Serial Bus) port, DB9 serial port & SNMPWEBCARD slot. HID-compliant USB (Universal Serial Bus) interface enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data & utility power conditions via all 3 network interfaces simultaneously.

Includes:: Power Alert monitoring software & complete cabling. Emergency Power Off (EPO) interface. Compatible with Tripp Lite's Watch Dog software. 4-post rackmount accessories included; optional 2-9USTAND tower stand kit & 2POSTRMKITWM 2-post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries & external battery packs. Attractive all-black color scheme. 1500VA / 1.5k VA / 1200 watt on-line double-conversion 2U rack/tower UPS 200/208/220/230/240V 50/60 Hz output; High efficiency economy mode option Expandable runtime; Hot-swap batteries; 19 in / 48.3cm installed depth USB (Universal Serial Bus), RS232 & EPO ports; support for SNMP/WEB card options Front panel status LEDs with detailed load & battery metering 2 independently switchable output load banks C14 inlet; C13 outlets Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's SMX1500LCD Line-Interactive Digital UPS System offers voltage regulation, surge suppression & long-lasting battery support for personal computers, network workstations, home entertainment systems & media centers. Internal UPS circuits support entry-level PCs for up to 60 min. or individual VCR/DVR components for up to 3 hours during power failures. Prevents data loss, viewing interruptions, lost recordings & loss of component programming. Automatic Voltage Regulation (AVR) circuits regulate brownouts as low as 176V back to usable levels without consuming battery power. Offers complete power protection in an attractive black tower configuration. It

Includes:: 8 battery-supported AC outlets. USB (Universal Serial Bus) port enables optional unattended system shutdown without data loss in case of extended power failure; USB (Universal Serial Bus) cable included. HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X. Built-in single-line phone suppression protect modem, satellite receiver or other peripherals with a standard dialup/DSL phone connection or dataline connection. Set of 2.2 GHz coaxial jacks protect against surges entering on CATV, satellite or broadcast antenna connections. Built-in audible alarm & large LCD front panel voltage display indicate line power status, battery power status, battery low/replace status & voltage boost operation. 1500VA/900W power-handling ability supports entry-level PCs, home entertainment systems, network workstations, audio/video components & more. It offers 4.5 min. battery runtime with a full load of 1500VA/900W & 12 min. with a half load of 750VA/450W. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...