Tripp Lite's Smart Online SUINT1000XL on-line, double-conversion UPS protects critical server, networking & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Space-saving upright tower format. Large capacity 1000VA/700W UPS continuously converts incoming AC to DC, then back to perfect sine wave AC output at selectable 220/230/240V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency fluctuations & other hard-to-solve power problems not addressed by other UPS types. True sine wave output & zero transfer time offers guaranteed compatibility with all equipment types. ...

Tripp Lite's SMX1050SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Large internal batteries offer 20 min. half load runtime & 7 min. full load runtime. 1050VA/650W power handling capability & full-time sine wave output offer guaranteed compatibility with networking, telecom & other sensitive electronic applications.

Includes:: 8 UPS-protected C13 output receptacles. Supports simultaneous remote monitoring of UPS & site power conditions via built-in network accessory card slot, USB (Universal Serial Bus) & DB9 serial monitoring ports. HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications interfaces support messaging of UPS & line power status, plus output power control for delayed or immediate reboot of all connected devices at once.

Includes:: Power Alert UPS monitoring & unattended shutdown software with management support for an unlimited number of network UPS systems. Single-line tel/DSL & network Ethernet line surge suppression. Built-in audible alarm & 9 LEDs offer status notification for line power, battery power, battery charge level, load level, plus AVR boost & trim operational status information. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's SMX1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage regulation, expandable battery runtime & intelligent monitoring with unattended shutdown capability. Tested to CE/IEC 60601-1 standard as medical electrical equipment. Built-in isolation transformer with Faraday shield offers full line isolation & removes common mode noise while maintaining full AC surge suppression in all modes.

Includes:: high quality hospital-grade plug & outlets. Resistant to electrostatic discharge. 1000VA power handling capacity supports computers, inter-networking equipment & other critical loads during commercial power failures. External battery connector allows configuration for up to several hours of runtime during power failures by adding one or more external battery packs (BP36V15-2U limit 1 or BP36V42-3U multi-pack compatible). Line interactive voltage regulation corrects brownouts as low as 155V & overvoltages as high as 274V back to normal 230V levels, saving battery reserves for use only during complete power failures.

Includes:: diagnostic LEDs & 2 built-in communications ports (1 USB (Universal Serial Bus), 1 DB9) that work with included Power Alert Software & cabling to provide automatic unattended shutdown of connected network & PC applications. 1000VA / 1k VA line interactive, extended run tower UPS Maintains 230V nominal output over an input range of 155 to 274V Professional features include serial port, IEC320 plug & outlets, built-in isolation transformer Input: IEC C14 inlet (230V 5A) / Output: 6 IEC C13 (230V) 2 year product warranty Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp-Lite PDUMH15HVNET.

Colour: Black
- Tripp Lite Switched, Metered Rack Power Distribution Units enable


...

Tripp Lite's Smart Online SUINT1500RTXL2 Ua online, double conversion UPS protects critical server, networking & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Large capacity 1.5k VA/1200 watt UPS continuously converts incoming AC to DC, then back to perfect sine wave AC output at selectable 200/208/220/230/240V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency fluctuations & other hard-to-solve power problems not addressed by other UPS types. Pure sine wave output & zero transfer time to battery offers guaranteed compatibility with all equipment types. Highly efficient operation in optional Economy Mode setting, saving BTU heat output & energy costs.

Includes:: 6 IEC-320-C13 outlets arranged in two individually switchable load banks of three outlets each. Load banks can be controlled independently via software interface to selectively reboot remote equipment or shed less important loads to extend battery runtime for critical equipment. Battery backup runtime can be extended through the addition of external 2U & 3U rackmount battery packs (Part Number BP48V24-2U or BP48V60RT-3U). Network management interfaces support simultaneous communications via USB (Universal Serial Bus) port, DB9 serial port & SNMPWEBCARD slot. HID-compliant USB (Universal Serial Bus) interface enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data & utility power conditions via all 3 network interfaces simultaneously.

Includes:: Power Alert monitoring software & complete cabling. Emergency Power Off (EPO) interface. Compatible with Tripp Lite's Watch Dog software. 4-post rackmount accessories included; optional 2-9USTAND tower stand kit & 2POSTRMKITWM 2-post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries & external battery packs. Attractive all-black color scheme. 1500VA / 1.5k VA / 1200 watt on-line double-conversion 2U rack/tower UPS 200/208/220/230/240V 50/60 Hz output; High efficiency economy mode option Expandable runtime; Hot-swap batteries; 19 in / 48.3cm installed depth USB (Universal Serial Bus), RS232 & EPO ports; support for SNMP/WEB card options Front panel status LEDs with detailed load & battery metering 2 independently switchable output load banks C14 inlet; C13 outlets Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's SMX1500SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Large internal batteries offer 20 min. half load runtime & 8 min. full load runtime. 1500VA/900W power handling capability & full-time sine wave output offer guaranteed compatibility with networking, telecom & other sensitive electronic applications.

Includes:: 8 UPS-protected C13 output receptacles. Supports simultaneous remote monitoring of UPS & site power conditions via built-in network accessory card slot, USB (Universal Serial Bus) & DB9 serial monitoring ports. HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications interfaces support messaging of UPS & line power status, plus output power control for delayed or immediate reboot of all connected devices at once.

Includes:: Power Alert UPS monitoring & unattended shutdown software with management support for an unlimited number of network UPS systems. Single-line tel/DSL & network Ethernet line surge suppression. Built-in audible alarm & 9 LEDs provide status notification for line power, battery power, battery charge level, load level, plus AVR boost & trim operational status information. Network-grade AC surge suppression protects equipment from damage & performance problems resulting from transient surges. Attractive, all-black tower housing. Features 1500VA/900W power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom & other sensitive electronic devices Large internal batteries offer runtimes of 20 minutes at half load (750VA/450W) & 8 minutes at full load (1500VA/900W) Automatic voltage regulation (AVR) circuits maintain user-selectable 220V, 230V or 240V nominal output over an input voltage range of 174-266V (220V), 182-278V (230V) or 190-290V (240V) 8 C13 output receptacles IEC320-C14 input connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles Power Alert UPS monitoring & unattended shutdown software included Offers simultaneous monitoring by up to 3 directly connected devices through included USB (Universal Serial Bus), DB9 & SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included Power Alert monitoring software Communications ports support messaging of UPS & line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage & remaining battery capacity HID-compliant USB (Universal Serial Bus) interface enables full integration with built-in power management & auto shutdown features of Windows & Mac OS X Supports Tripp Lite's Watch Dog software (requires optional WATCHDOGSW) 9 LEDs provide continuous status information of UPS operating parameters & site power quality Hot-swappable batteries allow on-site battery replacement without powering off connected equipment Optional PDUBHV10 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment Single-line tel/DSL & network Ethernet line surge suppression CE/IEC 62040, GOST, SASO, Ro HS-compliant, Class A Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Tripp Lite's PDUMV20HVNET Switched, Metered Rack Power Distribution Unit provides a variety of advanced network control & monitoring functions. It gives IT managers the ability to remotely monitor PDU power consumption & in-rack environmental conditions, & to turn on, turn off, recycle or lock out power to each individual receptacle. Switched PDU systems can be accessed, configured & controlled through secure Web, SNMP or Telnet interfaces. Individually switched outlets can be controlled via a built-in Web/network interface, enabling remote reboots of unresponsive network hardware. User-defined power-up & power-down outlet sequences ensure proper operation of interdependent IT systems & prevent inrush-related overloads as devices are powered on. Programmable load shedding of less critical devices at user-defined intervals extends UPS uptime in response to power failures. Unused PDU outlets can be electronically locked off to prevent powering of unauthorized hardware. PDU power consumption is displayed locally & can be monitored via the Web/network interface, with user-defined alarms to warn of potential overloads before critical IT mains or branch breakers trip. An optional ENVIROSENSE temperature/humidity probe enables remote monitoring of in-rack environmental conditions & alarms for up to three user-supplied contact-closure sensors. It supports real-time monitoring, notification & logging of all on-board reporting functions with user-specified alarm thresholds & actions for each reported condition. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Tripp Lite's Smart Online SUINT2000XL on-line, double-conversion UPS protects critical server, networking & telecommunications equipment from blackouts, voltage fluctuations & transient surges. Space-saving upright tower format. Large capacity 2000VA/1400W UPS continuously converts incoming AC to DC, then back to perfect sine wave AC output at selectable 220/230/240V AC (+/-2%). Removes harmonic distortion, fast electrical impulses, frequency fluctuations & other hard-to-solve power problems not addressed by other UPS types. True sine wave output & zero transfer time offer guaranteed compatibility with all equipment types.

Includes:: 8 C13 outlets. Battery support can be extended with external battery packs (part BP72V18).

Includes:: slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port for unattended shutdown, remote control & monitoring of UPS system & power data.



...

Tripp Lite's APSINT2012 DC-to-AC inverter with automatic line-to-battery transfer & integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 230V AC power from any 12V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment & the battery set is recharged via 3 stage, selectable 15/60 amp charging system. In UPS mode, the APS system responds to blackouts & voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output.

Includes:: a set of high current DC input terminals for simple installation (user supplies batteries & cabling
- see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging & UPS line power operation, plus efficient PWM sine wave AC output in inverter & UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors & other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching & continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications & site conditions with adjustable charger settings for wet/gel battery types & selectable line to battery power transfer voltages. 12V DC or 230V AC input; 230V, 50 Hz output (hardwired) 2000 watts continuous, 3000 watts Over Power & 4000 watts Double Boost inverter output (see specifications) 3 stage, selectable 15/60 amp wet/dry cell battery charger Auto Transfer Switching option for battery backup / UPS operation Reliability enhanced large-transformer design with protected DC & AC wiring terminals Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

This product is a 2200VA on-line, double-conversion UPS system for critical server, network & telecommunications equipment. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 130V & overvoltages to 275V. Network management interfaces support simultaneous communications via USB (Universal Serial Bus) port, DB9 serial port & SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data & utility power conditions via all 3 network interfaces. Integrated 2-bank PDU switching supports load shedding & remote-reboot of connected equipment. LED display panel easily rotates for better viewing in rackmount or tower configurations. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...