Hyper X FURY solid-state drive delivers impressive performance at an affordable price, to get you into the game faster & improve your gameplay. Ideal for desktops & notebooks, it features a slim 7mm form factor & Sand Force SF-2281 controller with SATA Rev 3.0 (6 Gb/s) performance. The result is faster system boot up, application loading & file execution plus faster map & level load time. Its synchronous NAND allows for higher & consistent drive performance. So you’re not only in the game, you’re winning it. In 120GB & 240GB capacities, Hyper X FURY SSD is available as a st&-alone drive & is easy to install. This cost-efficient upgrade is less disruptive than buying a new system to increase performance. The new FURY entry-level product line from Hyper X

Includes:: memory & SSDs & is designed for gamers, enthusiasts & System Integrators, who can now have consistent Hyper X branding for their gaming PCs. Built with Flash memory, Hyper X FURY SSD has no moving parts & is cooler, quieter & more shock- & vibration-resistant than traditional hard drives, making it the ideal hard drive replacement. It’s backed by a three-year warranty & free technical support. FEATURES/BENEFITS Fast — boosts overall system responsiveness & performance enhanced gameplay — dramatically reduces games & levels loading time to get faster into the game Slim — 2.5-inch drive available in 7mm to fit in more systems (even slimmer notebooks) Reliable — cool, rugged & durable drive to push your system to the limits Full Native Capacities — 120GB & 240GB options to better fit your data storage needs Cost-effective — offers the perfect combination of price/performance for budget-minded users SPECIFICATIONS Form factor
- 2.5" Interface
- SATA Rev. 3.0 (6 Gb/s) with backwards compatibility to SATA Rev. 2.0 Capacity
- 120GB Baseline Performance Compressible Data Transfer (ATTO) All capacities: 500MB/s Read & 500MB/s Write Incompressible Data Transfer (AS-SSD & Crystal Disk Mark) 120GB — 420MB/s Read & 120MB/s Write Maximum 4k Read/ Write 120GB — up to 84, 500/ up to 52, 000 IOPS Random 4k Read/ Write 120GB — up to 11, 500/ up to 52, 000 IOPS PCMark Vantage HDD Suite Score 120GB — 60, 000 PCMark 8 Storage Bandwidth 120GB – 140 MB/s Total Bytes Written (TBW)
- 240GB: 641TB 2.5 DWPD Power Consumption
- 0.31 W Idle / 0.35 W Avg / 1.65 W (MAX) Read / 2.76 W (MAX) Write Storage temperature
- -40°C~85°C Operating temperature
- 0°C~70°C

Dimensions
- 69.8mm x 100.1mm x 7mm Weight
- 90.03g Vibration operating
- 2.17G Peak (7–800 Hz) Vibration non-operating
- 20G Peak (10–2000 Hz) Life expectancy
- 1 million hours MTBF















...

Hyper X FURY solid-state drive delivers impressive performance at an affordable price, to get you into the game faster & improve your gameplay. Ideal for desktops & notebooks, it features a slim 7mm form factor & Sand Force SF-2281 controller with SATA Rev 3.0 (6 Gb/s) performance. The result is faster system boot up, application loading & file execution plus faster map & level load time. Its synchronous NAND allows for higher & consistent drive performance. So you’re not only in the game, you’re winning it. In 120GB & 240GB capacities, Hyper X FURY SSD is available as a st&-alone drive & is easy to install. This cost-efficient upgrade is less disruptive than buying a new system to increase performance. The new FURY entry-level product line from Hyper X

Includes:: memory & SSDs & is designed for gamers, enthusiasts & System Integrators, who can now have consistent Hyper X branding for their gaming PCs. Built with Flash memory, Hyper X FURY SSD has no moving parts & is cooler, quieter & more shock- & vibration-resistant than traditional hard drives, making it the ideal hard drive replacement. It’s backed by a three-year warranty & free technical support. FEATURES/BENEFITS Fast — boosts overall system responsiveness & performance enhanced gameplay — dramatically reduces games & levels loading time to get faster into the game Slim — 2.5-inch drive available in 7mm to fit in more systems (even slimmer notebooks) Reliable — cool, rugged & durable drive to push your system to the limits Full Native Capacities — 120GB & 240GB options to better fit your data storage needs Cost-effective — offers the perfect combination of price/performance for budget-minded users SPECIFICATIONS Form factor
- 2.5" Interface
- SATA Rev. 3.0 (6 Gb/s) with backwards compatibility to SATA Rev. 2.0 Capacity
- 240GB Baseline Performance Compressible Data Transfer (ATTO) All capacities: 500MB/s Read & 500MB/s Write Incompressible Data Transfer (AS-SSD & Crystal Disk Mark) 240GB — 470MB/s Read & 220MB/s Write Maximum 4k Read/ Write 240GB — up to 84, 500/ up to 41, 000 IOPS Random 4k Read/ Write 240GB — up to 22, 500/ up to 41, 000 IOPS PCMark Vantage HDD Suite Score 240GB — 60, 000 PCMark 8 Storage Bandwidth 240GB – 180 MB/s Total Bytes Written (TBW)
- 240GB: 641TB 2.5 DWPD Power Consumption
- 0.31 W Idle / 0.35 W Avg / 1.65 W (MAX) Read / 2.76 W (MAX) Write Storage temperature
- -40°C~85°C Operating temperature
- 0°C~70°C

Dimensions
- 69.8mm x 100.1mm x 7mm Weight
- 90.03g Vibration operating
- 2.17G Peak (7–800 Hz) Vibration non-operating
- 20G Peak (10–2000 Hz) Life expectancy
- 1 million hours MTBF















...

Get in the game with Hyper X FURY. Even newbies get up to speed fast, since FURY automatically recognises its host platform & automatically overclocks to up to 1866 M Hz, providing plenty of power for your next death match. FURY's asymmetric heatspreader design lets you stand out from the crowd. It's available in black, blue, red & -- for the first time in the Hyper X line -- white, with a black PCB. So your rig can reflect your style & you can show it off with pride. It's 100-percent tested & LAN-ready plus it's backed by free technical support. Hyper X Pn P memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. Pn P cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Hyper X FURY is available in frequency speeds from 1333 M Hz to 1866 M Hz. Reach faster speeds & higher capacities by just installing the memory, no adjustments in BIOS needed. No matter if you are an Intel or AMD gamer, the Hyper X FURY is ideal for you. To make sure it works, Hyper X FURY has been tested with popular brands of motherboards. Does your system have enough memory to get you into the game? Kits are available to max out your system's memory with up to 16GB of high-performance goodness. ...

Hyper X Impact 8GB Kit DDR4 2400 M Hz SODIMM Memory (2x 4GB) Hyper X HX424S14IB/4 is a 512M x 64-bit (4GB) DDR4-2400 CL14 SDRAM (Synchronous DRAM) 1 Rx 8, memory module, based on eight 512M x 8-bit DDR4 FBGA components. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR4-2400 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the Pn P Timing Parameters section below. The JEDEC standard electrical & mechanical specifications are as follows: Pn P JEDEC TIMING PARAMETERS: JEDEC/ Pn P: DDR4-2400 CL14-14-14 @1.2V DDR4-2133 CL13-13-13 @1.2V XMP Profile 1: DDR4-2400 CL14-14-14 @1.2V FEATURES Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.18” (30.00mm) SPECIFICATIONS CL (IDD) 14 cycles Row Cycle Time (t R Cmin) 46.75ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 29.125ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used.

...

Hyper X Impact 16GB Kit DDR4 2400 M Hz SODIMM Memory (2x 8GB) Hyper X HX424S14IB/4 is a 512M x 64-bit (4GB) DDR4-2400 CL14 SDRAM (Synchronous DRAM) 1 Rx 8, memory module, based on eight 512M x 8-bit DDR4 FBGA components. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR4-2400 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the Pn P Timing Parameters section below. The JEDEC standard electrical & mechanical specifications are as follows: Pn P JEDEC TIMING PARAMETERS: JEDEC/ Pn P: DDR4-2400 CL14-14-14 @1.2V DDR4-2133 CL13-13-13 @1.2V XMP Profile 1: DDR4-2400 CL14-14-14 @1.2V FEATURES Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.18” (30.00mm) SPECIFICATIONS CL (IDD) 14 cycles Row Cycle Time (t R Cmin) 46.75ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 29.125ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used.

...

Hyper X Impact 8GB DDR4 2133 M Hz SODIMM Memory Hyper X HX421S13IB/4 is a 512M x 64-bit (4GB) DDR4-2133 CL13 SDRAM (Synchronous DRAM) 1 Rx 8, memory module, based on eight 512M x 8-bit DDR4 FBGA components. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR4-2133 at a low latency timing of 13-13-13 at 1.2V. Additional timing parameters are shown in the Pn P Timing Parameters section below. The JEDEC standard electrical & mechanical specifications are as follows: Pn P JEDEC TIMING PARAMETERS: JEDEC/ Pn P: JEDEC/ Pn P: DDR4-2133 CL13-13-13 @1.2V XMP Profile 1: DDR4-2133 CL13-13-13 @1.2V FEATURES Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.18” (30.00mm) SPECIFICATIONS CL (IDD) 13 cycles Row Cycle Time (t R Cmin) 46.5ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 33ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used.

...

Hyper X Impact 8GB DDR4 2400 M Hz SODIMM Memory Hyper X HX424S14IB/4 is a 512M x 64-bit (4GB) DDR4-2400 CL14 SDRAM (Synchronous DRAM) 1 Rx 8, memory module, based on eight 512M x 8-bit DDR4 FBGA components. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR4-2400 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the Pn P Timing Parameters section below. The JEDEC standard electrical & mechanical specifications are as follows: Pn P JEDEC TIMING PARAMETERS: JEDEC/ Pn P: DDR4-2400 CL14-14-14 @1.2V DDR4-2133 CL13-13-13 @1.2V XMP Profile 1: DDR4-2400 CL14-14-14 @1.2V FEATURES Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.18” (30.00mm) SPECIFICATIONS CL (IDD) 14 cycles Row Cycle Time (t R Cmin) 46.75ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 29.125ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used.

...

Hyper X HX318LS11IBK2/16 is a kit of two 1G x 64-bit (8GB) DDR3L-1866 CL11 SDRAM (Synchronous DRAM) 2 Rx 8, low voltage, memory modules, based on sixteen 512M x 8-bit DDR3 FBGA components per module. Total kit capacity is 16GB. Each module kit has been tested to run at DDR3L-1866 at a ow latency timing of 11-11-11 at 1.35V or 1.5V. Additional iming parameters are shown in the Pn P Timing Parameters section below. JEDEC standard 1.35V (1.28V ~ 1.45V) & 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.35V (1.28V ~ 1.45V) & 1.5V (1.425V ~ 1.575V) 933 M Hz f CK for 1866 Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6, 5 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C Asynchronous Reset PCB: Height 1.180” (30.00mm), double sided components

...

Hyper X HX318LS11IB/4 is a 512M x 64-bit (4GB) DDR3L-1866 CL11 SDRAM (Synchronous DRAM) 1 Rx 8, low voltage, memory modules, based on eight 512M x 8-bit DDR3 FBGA compo-nents. This module has been tested to run at DDR3L-1866 at a low latency timing of 11-11-11 at 1.35V or 1.5V. Additional timing parameters are shown in the Pn P Timing Parameters section below. FEATURES JEDEC standard 1.35V (1.28V ~ 1.45V) & 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.35V (1.28V ~ 1.45V) & 1.5V (1.425V ~ 1.575V) 933 M Hz f CK for 1866 Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6, 5 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock 8-bit pre-fetch Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm 1%) Burst Length: 8 (Interleave without any limit, sequential with starting address 000 only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe On Die Termination using ODT pin

...

Hyper X HX318LS11IBK2/8 is a kit of two 512M x 64-bit (4GB) DDR3L-1866 CL11 SDRAM (Synchronous DRAM) 1 Rx 8, low voltage, memory modules, based on eight 512M x 8-bit DDR3 FBGA components per module. Total kit capacity is 8GB. Each module kit has been tested to run at DDR3L-1866 at a low latency timing of 11-11-11 at 1.35V or 1.5V. JEDEC standard 1.35V (1.28V ~ 1.45V) & 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.35V (1.28V ~ 1.45V) & 1.5V (1.425V ~ 1.575V) 933 M Hz f CK for 1866 Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6, 5 Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock 8-bit pre-fetch Burst Length: 8 (interleave without any limit, sequential with starting address '000' only), 4 with t CCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS) Bi-directional Differential Data Strobe Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C degrees Asynchronous Reset

...