D-Links DFE-530TX Fast Ethernet adapter is a high-performance auto-sensing 10/100 Mbps dual-speed adapter for the PCI bus. The adapter operates in the 32-bit Bus Master mode, delivering throughputs at multi-megabits per second with little stress on hosts CPU. Network administrators can install optional boot ROMs on the adapters to implement network security. Diskless workstations equipped with these ROMs can remote boot from Net Ware or Windows NT servers & access authorized data. The adapter supports all major network operating systems, including Net Ware, Windows & Linux. ...

The DGS-3100-24 switch

Includes:: 2 dedicated HDMI stacking ports, each providing 5 Gbps stacking bandwidth.

...

The DGS-3200-10 Security Gigabit Switch offers a new generation of intelligence & defense displayed through the delivery of its high performance, flexible expansion, & robust security. It executes firm network security & comes with ACL functionalities, which secure the internal IT network against external viruses from invading the LAN. Built on fan-less technology, this compact, 11-inch switch produces & emits less heat & noise than the standard switch
- ideal for office environments or circumstances that require undisturbed silence. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

The DGS-1005D (Green Ethernet version) is a 5-port unmanaged Gigabit switch that consumes less energy than conventional switches of the same

Specification. This switch reacts when a device attached to it is turned off, by placing the corresponding port in a standby mode that requires less power. In addition, the switch is able to detect the Ethernet cable length & adjust power usage accordingly, hence saving any surplus power that would otherwise dissipate as heat. These two features combined can save up to 27% of the power used by the switch. This function allows the flow of data to be adjusted between switch & server, to ensure a reliable data transfer. At 2000 Mbps full duplex, the switch provides high-speed data pipes to your servers with minimum data transfer loss. All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable.

...

Also available in 8-port version
- click here. Think Green D-Link takes the lead in networking industry to release Green Ethernet
...

Also available in 5-port version
- click here. Think Green D-Link takes the lead in networking industry to release Green Ethernet
...

The DGS-1008P offers an economical way for SOHO & small to medium businesses (SMB) to benefit from the increased bandwidth of Gigabit Ethernet. It provides 8 Gigabit ports for fast server deployment to meet increasing network loads. The Gigabit Po E ports provide a larger bandwidth for high speed network applications, especially IEEE802.11n Access Points, high resolution video cameras, & phones. Gigabit Connection for Home The D-Link DGS-1008P 8-Port Gigabit Po E Unmanaged Desktop Switch enables home & office users to easily connect & supply power to Power over Ethernet (Po E) devices such as wireless access points (APs), IP cameras, & IP phones. It also provides the opportunity to add additional Ethernet devices like computers, printers, & Network Attached Storage (NAS) onto a network. This compact Po E switch operates quietly, making it ideal to be used in virtually any room or office. Power Over Ethernet (Po E) The first four ports of the DGS-1008P support the IEEE 802.3af Po E protocol. Each of these four ports can supply up to 15.4 watts, for a total Po E budget of 52 watts, allowing users to attach an IEEE 802.3af-compliant device to the DGS-1008P that requires no additional power. Use Po E for applications that are far from power outlets or when you want to minimize the clutter of extra cables. Auto MDI/MDIX Crossover All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables. Conserve Energy The DGS-1008P makes use of D-Link Green™ eco-friendly technology, providing energy savings, reduced power consumption, & a longer product life without sacrificing operational performance or functionality. This switch helps to conserve energy through methods such as Link Status & Cable Length Detection. The Link Status feature automatically powers down ports that have no link, allowing the switch to save substantial amounts of energy by cutting power for unused ports or ports connected to computers that have been shut down. It can also detect connected cable lengths, & adjust power usage accordingly, helping you save energy without affecting networking performance. In addition, the fan-less design extends the product’s life & also reduces noise. ...

The DGS-1008P Po E Gigabit Desktop switch provides a cost-effective way for SOHO & SMB to benefit from the Power over Ethernet (Po E) technology by allowing users to power up devices such as wireless access points, network cameras or IP phones directly from the network cables. The DGS-1008P is equipped with Gigabit ports for faster speeds, & integrates D-Links Green Ethernet technology to save power when the switch is not in use. Its fanless design makes it completely silent so it is ideal for offices, libraries or meeting rooms. The first four ports of the DGS-1008P support the IEEE 802.3af Po E standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimize the clutter of extra power supplies. The switch will automatically detect the power that a connected Po E device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected Po E overload, protecting both the switch & the connected device. Every time the DGS-1008P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems. Despite being an unmanaged, Plug & Play switch, the DGS-1008P is able to classify network traffic by assessing the existing 802.1p & DSCP fields in the Ethernet frames & IP packets respectively, & forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice & data traffic without delays or loss of quality. The DGS-1008P is part of D-Link Green, D-Links eco-friendly technology, providing energy savings, reduced power consumption, & a longer product lifespan without sacrificing operational performance or functionality. This switch implements the Green Ethernet technology, which can save a substantial amount of energy by detecting the connected cable lengths, adjusting the power accordingly; & the port status, putting them in low-power, st&-by mode when no network traffic is detected. Thanks to these power reductions, D-Link has been able to remove the fans in the DGS-1008 Ps design, making it completely silent & dramatically increasing its lifespan. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Think Green! D-Link takes the lead in networking industry to release Green Ethernet technology with its new series of SOHO Gigabit switches. These environmentally-friendly devices decrease energy costs through the reduction of power consumption without sacrificing operational performance or functionality, providing benefits to both the ecosystem & Home/SOHO users. They are designed to help conserve energy, protect our environment from harmful substances, & reduce waste by using recyclable packaging. Automatically powers down ports that have no link Budgets power output for different Ethernet cable lengths Protecting the environment Complies with Ro HS directive that restricts the use of certain hazardous materials Complies with WEEE (Waste Electrical & Electronic Equipment) directives that use recyclable packaging to help reduce waste that goes into theenvironment Inexpensive Gigabit solution for workgroup users from desktops Easily installable on desktop 16 or 24 10/100/1000 Mbps Gigabit ports on Cat. 5 cable 32 Gbps (16-port switch), 48 Gbps (24-port switch) switching fabric capacity Auto MDI/MDIX cross over for all ports Secure store-&-forward switching scheme Full/half-duplex for Ethernet/ Fast Ethernet speeds Blazing 2000 Mbps full duplex for Gigabit speed IEEE 802.3x Flow Control Plug-&-Play installation Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. ...

D-Links Green Ethernet switches include intelligent energy-saving features to detect if & how each port is being used, & adjust the power accordingly. Each switch contains a chip to check the status of each port. If no cable is linked, or a connected device is switched off, the chip detects that no power is required & puts the port into sleep mode. The chip will also assess the power needs of a port according to the proximity of the connected device. So while a port linked via a 100 metre cable may require full power, a port using a 10 metre cable will be allocated significantly less power. D-Link Green Ethernet for Schools offers a range of smart & unmanaged switches to match your needs. ...