Provides a replaceable power supply for the GSM7328S-200 & GSM7352S-200 Gigabit switches When an RPS (redundant power supply) is used, the power supply can be replaced without stopping the switch or requiring a reboot Provides a "hot swap" capability when used with an RPS ...

NETGEAR offers wireless, Ethernet, powerline & phoneline networking products through a complete line of routers, gateways, switches, hubs, & adapters. NETGEAR products offer the strongest security & privacy options available to protect home & business customers.PRODUCT
Features: Adds 10-Gigabit Ethernet fiber connectivity to the GSM7328S & GSM7352S via the AX741 Adapter module; Drive 10-Gigabit Ethernet connectivity to 300m distances;LC connector; Hot Swappable; Interoperable with standard 10GBASE-SR " Short Reach" XFP optics; Supports both 50um & 62.5um multimode fiber cables.
...

NETGEAR Pro Safe AXM761 SFP Transceiver Module Adds 10 Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces Fits into the two built-in 10GE SFP+ interfaces of GSM72xx PS / GSM73xx S Fits into the 10GE SFP+ interface of the SFP+ Adapter module AX743 Fits into standard 10 Gigabit SFP+ interfaces LC connector Drives 10 Gigabit Ethernet up to 300m distances with 50/125µm laser-optimized OM3 multimode fiber cables Drives 10 Gigabit Ethernet up to 33m distances with 62.5/125µm OM1 multimode fiber cables Provides hot-swappable installation or removal 10 G Base SR fiber technology is the same for XFP & SFP+: one Switch equipped with XFP 10 G Base-SR LC connectivity can uplink to another Switch equipped with SFP+ 10 G Base-SR LC connectivity using the same fiber Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Adds 10 Gigabit Ethernet "long-reach" LC fiber connectivity to the standard SFP+ interfaces Fits into the two built-in 10GE SFP+ interfaces of GSM72xx PS / GSM73xx S Fits into the 10GE SFP+ interface of the SFP+ Adapter module AX743 Fits into standard 10 Gigabit SFP+ interfaces LC connector Drives 10 Gigabit Ethernet up to 10km distances with 9/125µm SMF single mode fiber cables Drives 10 Gigabit Ethernet up to 300m distances with 50/125µm laser-optimized OM3 multimode fiber cables Drives 10 Gigabit Ethernet up to 33m distances with 62.5/125µm OM1 multimode fiber cables Provides hot-swappable installation or removal 10 G Base LR fiber technology is the same for XFP & SFP+: one Switch equipped with XFP 10 G Base-LR LC connectivity can uplink to another Switch equipped with SFP+ 10 G Base-LR LC connectivity using the same fiber Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Direct Attach SFP+ copper cable 10 Gigabit SFP+ with ultra low latency For servers, storage & switches short uplinks SFP+ connector on both sides ...

NETGEAR FS105 5 Port 10/100 Desktop Switch NETGEARs cost effective FS105 Fast Ethernet Switch provides your network with high-speed, 10/100 Mbps auto-sensing connectivity. This 5-port switch is incredibly easy to set-up, just plug in your Ethernet networking cables & connect a power cord. Engineered without the need for internal fans, the FS105 operates silently. Compact Solidly built in small sizes that are easy to position when space is at a premium. Simple to Use Once you connect the hardware, your switch is operating! Quiet No fan means no noise, which helps maintain a peaceful atmosphere in your busy office. Great value Competitively priced—compare them to others & see the difference. Product Highlights All 5 ports switch automatically senses the right networking speed: 10 or 100 Mbps Engineered without the need for internal fans, the FS105 operates silently No software to configure, the FS105 switch operates as soon as you connect it Housed in a compact, sturdy metal case for years of dependable use Number of Built-in Ports 5 x 10/100 Mbps port
- Auto-Uplink
- Auto-Sensing
- Fall/ Half Duplex LEDs Power Collision/ Rx/ Tx & speed indicators for each port Link, speed, & activity indicators built into each RJ-45 port Performance Transmission Method Store-&-forward Non-blocking, wire-speed frame forward rate Forwarding Rate 14, 800 frames/sec max for 10M port 148, 000 frames/sec max for 100M port Network latency Less than 20 microseconds for 64-byte frames for 100 Mbps to 100 Mbps transmission

Dimensions 158 x 103 x 27 mm (Wx Dx H) (6.2" x 4.1" x 1.1 inches) Manufactures Warranty 5 years for unit 1 year for power adapter Package Contents NETGEAR FS105 Fast Ethernet Switch Wall-mount kit AC adapter Quick Installation Guide Warranty & registration card Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.




...

NETGEAR’s popular FS100 series desktop switches, known for its reliability & performance, provide your LAN with high-speed, 10/100 Mbps auto-sensing connectivity for as many as 5, 8, or 16 users. Just plug in your Ethernet cables, connect a power cord, & you’re ready to go-there’s no software to configure. They negotiate to the fastest possible connection & with Auto Uplink™ technology, these switches automatically figure out if the link needs a straightthrough or cross-over connection, & makes the right choice. Existing 10BASE-T devices are easily integrated within higher bandwidth environments, with full wire speeds on all ports of either 10 Mbps or 100 Mbps. Engineered without the need for internal fans, they operate silently. & each of these very compact switches is housed in a sturdy metal case for years of dependable use. At Your Service Five, eight, or sixteen ports provide LAN access for many users. Every port supports up to 200 Mbps in dedicated bandwidth & traffic is forwarded flawlessly with automatic flow control. Compact Solidly built in small sizes that are easy to position when space is at a premium. Ideal for conference rooms, class rooms, study groups or small offices. Place it on any flat surface or use the included wall mount kit to tuck it out of the way. Simple To Use Once you connect the hardware, your switch is operating! Auto negotiation takes care of the speed & duplex, while Auto Uplink takes care of the MDI/MDI-X connection. Eliminate the need for toggle switches or special crossover cables. Quiet No fan means no noise, which helps maintain a peaceful atmosphere in your busy office. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Pro Safe FS108P provides power & data from a single point, using Power over Ethernet (Po E) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link & four of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary Po E or non-Po E equipment. In addition, it discontinues the power when Po E devices are disconnected. Easy & reliable, the Pro Safe FS108P automatically determines Po E requirements, speed, duplex, & cable type using Auto Uplink. The affordably priced Pro Safe FS108P delivers Po E to any small business network that wants to simplify the installation of wireless access points & IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. Po E eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access & lowers installation costs. Compact & flexible, the Pro Safe FS108P is ideal for small business network that want to inexpensively use Po E to deploy wireless access points & IP-based network surveillance cameras. Five, eight, or sixteen ports provide LAN access for many users. Every port supports up to 200 Mbps in dedicated bandwidth & traffic is forwarded flawlessly with automatic flow control. Compact Solidly built in small sizes that are easy to position when space is at a premium. Ideal for conference rooms, class rooms, study groups or small offices. Place it on any flat surface or use the included wall mount kit to tuck it out of the way. Simple To Use Once you connect the hardware, your switch is operating! Auto negotiation takes care of the speed & duplex, while Auto Uplink takes care of the MDI/MDI-X connection. Eliminate the need for toggle switches or special crossover cables. Quiet No fan means no noise, which helps maintain a peaceful atmosphere in your busy office. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

NETGEAR FS116 16 Port 10/100 Ethernet Switch NETGEARs FS116 Fast Ethernet Switches provide your LAN with high-speed, 10/100 Mbps auto-sensing connectivity for as many as 5, 8, or 16 users. Just plug in your Ethernet cables, connect a power cord, & you’re ready to go—there’s no software to configure. Engineered without the need for internal fans, they operate silently. & each of these very compact switches is housed in a sturdy metal case for years of dependable use. When you want greater bandwidth & increased network access for your growing business, plus the added benefit of quiet operation, NETGEAR’s FS105, FS108, & FS116 are your best choices for quality, convenience, & smooth-running usability
- all at very affordable prices. At your Service Five, eight, or sixteen ports provide LAN access for many users. Compact Solidly built in small sizes that are easy to position when space is at a premium. Simple to Use Once you connect the hardware, your switch is operating! Quiet No fan means no noise, which helps maintain a peaceful atmosphere in your busy office. Great value Competitively priced—compare them to others & see the difference. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

NETGEAR FS116P 16 Port Fast Ethernet Switch w/8 Po E Ports Connectivity with Po E The Netgear FS116P ‘ Power over Ethernet’ (Po E) enabled switch provides 16 x 10/00 Fast Ethernet ports for data communications. 8 of these ports can also provide Po E, the IEEE 802.3af industry standard to deliver power as well as data over the same Ethernet cable. Power over Ethernet greatly simplifies the positioning & installation of wireless & IP devices, such as wireless access points, IP-based CCTV cameras & Vo IP phones. Po E eliminates the need to position dedicated electrical sockets near each & every mobile wireless device, lowering installation costs. The Netgear FS116P Po E switch enables network administrators to position their IP & wireless devices anywhere they choose, i.e. high up on ceilings or walls, even where AC power would have difficult to access & expensive to install. An advanced auto-sensing algorithm provides power only to 802.3af end devices, so there is no need to be concerned about damaging non-Po E equipment. In addition, as with all of NETGEAR’s power over Ethernet switches, the Netgear FS116P discontinues the power when Po E devices are disconnected. Easy to set-up & reliable, the Netgear Pro Safe FS116P unmanaged Power over Ethernet switch automatically determines Po E requirements, speed, duplex & cable type of each connection using Auto Uplink™ technology. value for your money With data network switching & Power over Ethernet integrated into a single casing, the Netgear Prosafe FS116P unmanaged switch saves space, reduces cabling costs & eliminates the need for dedicated electrical outlets for wireless & IP devices. All this minimises disruption in the office & lowers installation costs by eliminating the need for electricians & extension reels. Product Highlights Data switching & Power-over-Ethernet (Po E) in one unit 16 data switching ports, 8 of which provide Po E Reduces cables & eliminates need for dedicated electrical outlets Locate wireless devices high on walls or ceilings for max coverage Auto Uplink™ auto detects speed, duplex & cable type Automatically detects Po E devices & supplies power as needed Compact & Flexible design at an attractive price Number of Built-in Network Ports 16 x 10/100 Mbps port
- Auto-negotiation of MDI-II (One MDI-X MIDI uplink port) LEDs Power, Po E Maximum Power Per Port: Link, Activity, Speed, Po E Active, Po E Status Performance Transmission Method Store-&-forward Bandwidth 3.2 Gbps Network latency Less than 20 ìs for 64-byte frames in store-&-forward mode for 100 Mbps to 100 Mbps transmission Mac Address 48 bit MAC addresses Automatic MAC Address Learning Address table up to 1K MAC address

Dimensions W 287 mm (11.3”) D 103 mm (4.1”) H 27 mm (1.1”) Manufactures Warranty 5 years for unit 2 year for power adapter Package Contents Netgear Pro Safe 16 Port 10/100 Switch with Power over Ethernet FS116P AC Adapter Wall-mount kit Installation guide Warranty/ Support Information card Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...